DRD211204KWH
The DRD2 LED Downlight allows you to bring general ambient lighting into a space with a very small, architectural exposure. The high performing light engine with off-board driver allows for more flexible installations and increased lifetime with improved thermal management. The DRD fixture uses a plenum-rated cable connector to link the downlight module to the remote driver box and then pops into place with its adjustable, spring-loaded retention tabs for a secure fit, eliminating the need for a J-box or recessed housing. Adding ambient or accent lighting in areas such as living rooms, hallways, art niches and display cases is now easier than ever.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Luminoso 4 inch Rotatable LED Residential Downlight provides advanced dimming parameters with capabilities reaching to as low as 5% and works with most widely available traditional dimmers
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- +1 more
- cct: 4000K → 2700K
- spec →
6 inch LED recessed downlight designed for vandal resistant or sealed / medical applications. Lumen packages from 1000 - 7000 lumens with color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology. Choose from an open reflector, or an enclosed version with a bottom lens or a bottom trim ring with lens. Available with lens thicknesses up to 0.375", with standard or tamper resistant stainless steel countersunk screws.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +3 more
- voltage: 120V → UNV
- spec →
The RL56 SeleCCTable is a complete LED baffle trim module for 5" and 6" aperture recessed downlights suitable for new construction, remodel and retrofit installation. Adding convenience, a field-selectable color temperature switch allows users to chose between 5 different color temperatures for the desired application need. The lens provides uniform illumination. Precision design makes any housing airtight for added savings and code compliance The RL56 is perfect for interior or exterior downlight applications.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +3 more
- beam_angle: 38° → 87°
- spec →
Recessed 5-6 inch nominal aperture retrofit LED downlight for installation in existing open frame commercial downlights. Retrofit collar fits housing openings 5-7/8" to 6-9/16" diameter. Medium beam reflector delivers 1.0 nominal spacing criteria. HC56R features an integral lens with damp and wet location listing in protected ceilings. Specify collar (housing), LED module, and trim separately to complete the luminaire.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +3 more
- voltage: 120V → 120V/277V/UNV
- spec →
Enjoy all the benefits of connected lighting technology in a sleek, versatile surface mount luminaire. This fixture doesn't require a housing, making it an easy solution for replacing existing light fixtures with smart, energy-saving LED. The BLD4 Smart Surface Mount is easy to install on junction boxes (including pancake boxes). It comes with all that HALO Home has to offer: wireless ON/OFF, dimming to 5%, and white tuning (2700K-5000K) along with more advanced features like Groups, Scenes, and Schedules. Install the free app on a smartphone/tablet to pair and wirelessly control these lights via secure Bluetooth connection. While compatible with standard ON/OFF switches, install HALO Home Controllers for optimal performance. Controllers provide HALO Home Smart Lights with constant power allowing them to strengthen and extend a HALO Home network by repeating and responding to wireless messages from any Controller, smartphone, or voice assistants* like Amazon Alexa or Hey, Google. White: BLD4089BLE40AWH
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- +3 more
- cct: 4000K → 2700/5000K
- spec →
Luminaires that are flush with or slightly below the ceiling surface make for a clean, uncluttered design. The majority of their components are concealed above the ceiling system. Many of our recessed ceiling luminaires include glass just below the surface to spark visual interest.
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- +3 more
- voltage: 120V → UNV
- spec →
LED recessed kits from Lithonia Lighting include an IC/Non-IC housing, trim with integrated LEDs, cutting stencil and mounting hardware all in one box.
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- cct: 4000K → 3000K
- spec →
The Juno® IC1LEDFW FireWall™ 4-inch Fire-Rated downlight solution offers an integral LED light engine delivering up to 1400 lumens and is compatible with a comprehensive selection of standard Juno
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- +4 more
- voltage: 120V → UNV
- cct: 4000K → 2700K
- spec →
Bend design rules with Full Circle. Full Circle Arc segments feature radii from 2 ft. to 10 ft. and add a playfulness not seen in ordinary recessed installations. Build sweeping arcs of light with
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +1 more
- cct: 4000K → 3000K
- spec →
The Solid State Steplight series from U.S. Architectural Lighting is flat-faced recessed wall or steplight luminaire suitable for step, low level, and directional lighting. It features contemporary corrosion-resistant cast aluminum housings and powder coating for durability. The 4482 model includes a louvered face with 45˚ cutoff, while the 5482 model has an open face with opal tempered glass. Both models use LED tubes with diffuse acrylic lenses and high-output LEDs available in Neutral, Cool, or Warm White. The LED drivers are UL recognized and operate between 120-277V. The fixtures are finished with a durable polyester powder coat in multiple color options. BABA compliant. UL listed for wet location.
- category
- subcategory
- environment
- voltage
- lumens
- CCT
- +1 more
- voltage: 120V → 120V/277V
- wattage: 8.1W → 19W
- beam_angle: 38° → 158.9°
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps NICOR Lighting
Full directory →27 rep agencies carry the Nicor Lighting line across 45 states. Pick your state.
Alabama AL1 agency
Birmingham · Mobile
Alaska AK1 agency
Statewide
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA1 agency
Fresno · Sacramento · San Francisco
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Commercial Lighting SalesCurrent
Statewide
Florida FL2 agencies
Panhandle
Fort Myers · Jacksonville · Miami · Orlando · Tampa
+35 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.