DCG421204KWH
The DCG LED Downlight Gimbal Series provides an economical, easy-to-install upgrade from incandescent lighting to a long-lasting and energy-efficient LED solution. Its easy to use twist-and-turn design allows for fine adjustment of the gimbal position. The 354 degrees of rotation and 35 degrees of adjustable tilt makes the DCG suitable for sloped ceilings and wall wash. The sleek design enhances any interior space with its flush mounting and aesthetic appeal.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The RSQ Series is the perfect lighting solution for low to medium-height ceilings. A shallow square lens and rotatable baffle trim make installation and alignment a breeze. With the Lumen Select Switch and flicker-free 5% dimming, you can easily customize the lighting levels to fit your needs. And the 6-position CCT switch offers a range of 5 color temperatures, plus Dim-to-Warm allowing you to create your own amazing ambiance. HALO RSQ LED Trims are suitable for new construction, remodel, and retrofit installation in most IC (insulation contact) or non-IC housings. They’re AIR-TITE, code-compliant, and provide additional energy savings. Upgrade your lighting with the RSQ Square Recessed LED Trims today.
- category
- subcategory
- environment
- voltage
- CCT
- wattage
- spec →
Custom 120V LED Tape Light system can be specified up to 150' with various power cords and accessories. Tape light is IP65 rated for indoor and outdoor applications, and produces 330 lumens per foot in dedicated color temperatures (2700K, 3000K or 4000K). To maintain ETL listing and IP65 rating, system is cut and capped/sealed in the factory. FEATURES · IP65 rated for wet locations · 120VAC system - integrated LED driver · Hardwired or Cord & Plug · 330 lumens / 3.6W per foot · Available in a range of color temperatures (2700K, 3000K or 4000K) · 150' maximum length and available in custom lengths · Mounting clips included and aluminum channel available Input Voltage: 120V Lumens / Wattage: 330lm / 3.6W per foot Color Temperature: 2700K, 3000K or 4000K Dimming: Triac Maximum Run Length: 150' Power Cord: Hardwired, Hardwired with Surge Protector, Cord & Plug, Cord & Plug with Surge Protector (factory installed) Surge Protector: Power cord can be specified with integral surge protector or installed separately (NATL-IP65/SP) Compatible Channels: NATL-CIP25: 4' Deep Recessed Channel (includes NUTP13-ADHTAPE) NATL-CIP26: 4' Deep Channel (includes NUTP13-ADHTAPE) NUTP13-ADHTAPE: 3M Adhesive (required for channels) NATL-IP6512: Mounting Clips, Set of Two (included with luminaire) Connectors (factory installed): NATL-IP65/EW-06: 6" Extension Cable NATL-IP65/C90-L: 90° Left Connector NATL-IP65/C90-R: 90° Right Connector
- category
- subcategory
- environment
- voltage
- CCT
- wattage
- spec →
EarthTronics 4″ LED Recessed Ceiling Light Trim Kit features five color selectable operations. Switch between 2700K, 3000K, 3500K, 4000K and 5000K easily at time of installation. This LED Recessed trim kit is ideal for retrofit or new construction applications. Ideal for use in residential kitchen, bathroom, and family room applications. For commercial applications it provides a cost-effective lighting solution for offices, corridors and restrooms. The nine-watt EarthTronics LED Recessed Ceiling Light Trim Kit delivers 93 lumens per watt with a high 80+ CRI for improved visual acuity and efficient performance. In addition, the downlight’s damp location rating makes the fixture a perfect solution for high humidity areas and bathroom showers found in long-term care facilities, as well as hotel guest rooms. It easily adapts to popular 4” downlight recessed fixtures as a retrofit to existing fixtures or as a trim kit for new installations.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
Halco LED Economical PAR20 Flood 7W 2700K 3000K 4000K or 5000K Dimmable 40 Degree Medium E26 Base 120V - 500-570 Lumen - 25000 hours - 80CRI Halco sku #s 82963 82964 82965 82966
- category
- subcategory
- environment
- voltage
- CCT
- wattage
The LITELUME™ LL-IFG6 Brings precision and versatility to your lighting project. This recessed, canless gimbal module combines a clean, modern look with powerful adjustability, 355° rotation and 90° tilt for perfect aiming every time. 5 CCT Field-selectable color temperatures 2700K–5000K ensures the right light for any application, from cozy residential spaces to demanding commercial environments. Long lasting efficiency, flexibility, and style without the need for a housing or junction box.
- category
- subcategory
- environment
- voltage
- spec delta
- cct: 4000K → 2700K
- spec →
The Luminoso TCDE Commercial downlight features a color temperature and wattage selectable switch to accommodate nearly any application.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- voltage: 120V → UNV
- wattage: 6W → 60W
- spec →
The CL recessed linear lighting series by Corelite provides clean lines of light with a simple easy-to-use design. Offered in 2" and 4" width linear apertures with trims to fit 5 different ceiling types, the CL slot lighting series is ideal for a variety of architectural environments. Offered in 4', 8', and 4' incremental continuous row lengths, the CL series provides uniform illumination while also reducing energy costs using Cooper Lighting's most advanced linear LED technology. The slot lighting has integrated sensor configuration options allow for even greater energy savings while providing cost-effective code-compliance for both retrofit and new installs. The Corelite CL series is ideal for office, education, hospitality, and healthcare environments.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- spec →
6 inch LED recessed downlight designed for vandal resistant or sealed / medical applications. Lumen packages from 1000 - 7000 lumens with color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology. Choose from an open reflector, or an enclosed version with a bottom lens or a bottom trim ring with lens. Available with lens thicknesses up to 0.375", with standard or tamper-resistant stainless steel countersunk screws.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- voltage: 120V → UNV
- spec →
Selectable lumens and color temperatures plus interchangeable reflector options offer the ultimate in flexibility and performance.The PRS4 reflectors are injection molded, providing an industry-leading true square aperture design with a refined corner detail. The reflectors feature high efficient Total Internal Reflection (TIR) lens optics that deliver a uniform square beam pattern available in narrow, medium and wide distribution options.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- voltage: 120V → 120V/277V/UNV
- spec →
Enjoy all the benefits of connected lighting technology in a sleek, versatile surface mount luminaire. This fixture doesn't require a housing, making it an easy solution for replacing existing light fixtures with smart, energy-saving LED. The BLD4 Smart Surface Mount is easy to install on junction boxes (including pancake boxes). It comes with all that HALO Home has to offer: wireless ON/OFF, dimming to 5%, and white tuning (2700K-5000K) along with more advanced features like Groups, Scenes, and Schedules. Install the free app on a smartphone/tablet to pair and wirelessly control these lights via secure Bluetooth connection. While compatible with standard ON/OFF switches, install HALO Home Controllers for optimal performance. Controllers provide HALO Home Smart Lights with constant power allowing them to strengthen and extend a HALO Home network by repeating and responding to wireless messages from any Controller, smartphone, or voice assistants* like Amazon Alexa or Hey, Google. White: BLD4089BLE40AWH
- category
- subcategory
- environment
- mounting
- voltage
- spec delta
- cct: 4000K → 2700/5000K
- spec →
3" aperture specification grade open downlight reflector. Suitable for use with 75W maximum low voltage tungsten-halogen or LED MR16 lamps, use also with integral LED light engine and reflectors. The 50° cutoff to lamp and lamp image provides a smooth, glare free distribution of light. Distribution based on lamp beam angle utilized. Use for task and general area illumination.
- category
- subcategory
- environment
- mounting
- voltage
- spec delta
- wattage: 6W → 75W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps NICOR Lighting
Full directory →27 rep agencies carry the Nicor Lighting line across 45 states. Pick your state.
Alabama AL1 agency
Birmingham · Mobile
Alaska AK1 agency
Statewide
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA1 agency
Fresno · Sacramento · San Francisco
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Commercial Lighting SalesCurrent
Statewide
Florida FL2 agencies
Panhandle
Fort Myers · Jacksonville · Miami · Orlando · Tampa
+35 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.