Monospot Pole Luminaire
Monospot pole luminaires are equipped with a tilt-and-turn fixing system. A wide range of reflectors make it possible to create different lighting scenarios. The street optic produces a bat-wing type distribution for illuminating paths and driveways.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The HALO Backlit LED Downlight (BLD) is a low-profile, high-performance surface-mount downlight with a sleek design and curved lens. Available in 3000K or field seleCCTable 5 color temperature options. The BLD is designed for installation in most 3-1/2” and 4” square, octagon, or round junction boxes and includes the supply wire adapter with an orange LED quick wiring connector. For added installation flexibility, the BLD4 can also be mounted to a 4" aperture IC and Non-IC recessed housings with its included friction blade brackets.
- category
- subcategory
- environment
- CCT
- wattage
- spec →
Floodlights are the ideal fixture for lighting situations where the main focus is to accent or highlight. This luminaire type is available in a wide range of light outputs and beam options, including several in LED. A versatile mounting system allows them to be installed on poles, facades, roofs, or
- category
- subcategory
- environment
- CCT
- wattage
- spec →
Mozart The traditionally styled transitional lantern MOZ Series luminaire by Sun Valley Lighting features a durable cast aluminum housing with either the PLED™ or VLED™ optical system. This fixture provides radial light distribution with minimal glare, making it suitable for traditional landscapes, roadways, and pathways. Available in two sizes and two mounting options: pendant mount or post top (tenon mount). BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.
- category
- subcategory
- environment
- CCT
- wattage
- spec →
Low-profile LED Bravo FROST Tunable White fixtures provide excellent and even illumination on all surfaces. At only 10 watts per foot, Bravo FROST TW produces an incredible 850 lumens per foot at a crisp sharp 90+ CRI. Each Bravo Frost TW contains it own driver allowing a 120V feed and longer single runs than low voltage systems. Each luminaire includes 90° adjustable brackets and integral CCT switch to change the color tempearture (3000K / 3500K / 4000K). Input Voltage: 120V Length: 12" Lumens / Wattage: 850lm / 10W per foot Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Included with luminaire: (2) 90° Adjustable mounting brackets and (1) End-to-End connector Accessories: NUA-902W: Hardwire Junction Box NUA-904W: 72" Hardwire Connector NUA-905W: 72" Cord and Plug NUA-903W: End-to-End Connector (included with luminaire) NUA-906W: 6" Jumper Cable NUA-912W: 12" Jumper Cable NUA-924W: 24" Jumper Cable NUA-972W: 72" Jumper Cable NUA-909W: 90° Adjustable Mounting Brackets (included with luminaire)
- category
- subcategory
- environment
- CCT
- wattage
- spec →
The fixture provides direct glare-free horizontal light while reflecting some of the light through the rear of the head, illuminating the top of the arm. The ergonomic design of the fixture head shapes the light and gives optimal light direction. A simple mechanical system provides great freedom of movement, so the light can always be set in the ideal position in the workspace. The shade is painted white on the inside, reflecting comfortable diffused light. The NJP series was designed by Oki Sato, founder of nendo design studio, with the intention of producing a new interpretation of the classic anglepoise lamp – with all its familiar details – in a contemporary design, featuring functions adapted to modern working life, both in the office and at home. The NJP Wall lamp’s flexible head and arms provide exceptional adjustability, which is often lacking in standard wall lights. This makes the light highly suitable for the bedroom, where adjustable beds are becoming increasingly common, and where it can be difficult to find the ideal position for a fixed wall light. It features an LED light source and is designed with the source positioned high up as to avoid dazzling and unpleasant lighting. One refined yet practical detail is its chimney-shaped head reflecting some of the light through the rear and therefore illuminating the top of the arm – while allowing the heat from the light source to escape.
- category
- subcategory
- environment
- CCT
- wattage
- spec →
Linear asymmetric LED luminaire for outdoor locations The Bartco Lighting BDA30 is a linear outdoor luminaire with a high-performance asymmetric optic, optimized for walkways, stairways and pedestrian bridges. The 3-1/4” x 3” extruded aluminum housing is fitted with internal shielding to minimize backlight and internal louvers to manage straylight. These features combine with optically engineered Fresnel prisms to produce a type IV distribution, uniformity ratio down to 2.75:1 and low BUG rating.
- category
- subcategory
- environment
- CCT
- wattage
FRAX SUPERSPOT SMALL WITHOUT BASE. Light and ambiance is not only for indoors, by combining light and architecture, outdoor settings also remains vibrant at night. With 7 different light effects and multiple installation options, Frax has been designed for every aspect of the urban architecture: any form, any material or any composition. OPTICAL PRECISION Frax is based on Deltalight’s LED Caset® technology, which combines multiple LEDs with individual collimator lenses per LED to generate a clean-cut light distribution. The individual lenses create a multi-layered light distribution to generate a clean 8° or 14° beam angle. Other beam angles or other light effects are being obtained by adding microlenses in front, sculpting the light into a 26° or 47° beam angle or into a linear or wallwash effect. Visual well-being Frax not only cares about the perfect light effect, it takes care about the passer-by as well. Frax can be provided with an additional honeycomb or a kap to reduce the possibility from directly looking into the light source. Both of them reduce any undesired light effect and the glare associated with it. Made for harsh environments IP65 IK 06 thanks to 5mm thick glass for Frax S IK 08 thanks to 8 mm thick glass for Frax M UV-resistant components for extended lifespan Thermal protector inside to prevent the luminaire from overheating D-Lock: in-house designed moisture lock to prevent humidity from entering the luminaire Installation made easy Apart from the extensive optical possibilities, Frax also offers a range of different mounting options . Standard, the luminaire comes on a round base but one can also opt to install the luminaire head on a pin, on a strap or on a simplified bracket. That way, Frax can easily be transformed to install in between the greenery, around a tree, pole or any other surface. To facilitate the installation of multiple Frax luminaires, a degree scale is integrated on the hinge, perfect for precise aiming and a proper repetitive light effect
- category
- subcategory
- environment
- CCT
- wattage
- spec →
• Luminaire uses ETI’s patented Color Preference® with 3 Selectable CCTs (3000K, 4000K, 5000K)
- category
- subcategory
- environment
- CCT
- wattage
- spec →
Create the indoor and outdoor architectural experience your project needs. Blending together a variety styles, shapes and finishes to compliment a myriad of architectural building designs, the Abolite RLM Series provides the performance, illumination tools, and possibilities you need through aesthetic appeal, design integrity and extensive product flexibility. LSI and Abolite — the names you trust for high-quality, high-performance RLM lighting solutions.
- category
- subcategory
- environment
- CCT
- wattage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →