EZJ-BOX E-SERIES
Up to 288 Watts, Multi-Channel, Constant Voltage LED Drivers with Forward Phase Dimming
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
• Made of rugged aluminum alloy with a glass lens • Projects light in both directions, illuminating the wall above and below • Durable and suitable for wet locations • Features a matte black finish and modern design • Includes a pre-installed dusk-to-dawn light photocell sensor for energy-saving operation by turning off lights during daytime • Operating Temperature : -4 deg.F to +104 deg.F / -20 deg.C to +40 deg.C
- category
- environment
- voltage
- dimming
- spec delta
- wattage: 288W → 18W
- spec →
TCS WiFi Smart Transformer: 150W/300W, stainless steel, smart app-controlled, 3 zones with dimming/scheduling, continuous power Smart Zone, 10-year warranty.
- category
- environment
- voltage
- wattage
- spec →
The Luminoso LED Emergency Back-up battery is UL recognized and allows LED fixtures to be used for both normal and emergency operation. In the event of a power failure, the LED Emergency battery backup switches to the emergency mode and operates the existing fixture for minimum of 90 minutes, and up to 120 minutes.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
The UC1 provides effective LED task lighting in a variety of environments. Constructed with minimal 3/4" depth and durable IK10 rated housing and lens. 24", 36", 48" lengths for use in confined spaces. UC1 comes with selectable CCT and dim to warm ELV/Triac (120V only) making it an excellent choice for a plethora of applications.
- category
- environment
- voltage
- dimming
- spec →
The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.
- category
- environment
- voltage
- spec delta
- wattage: 288W → 600W
- spec →
The Diverge™ off-grid lighting system is a portable solution, utilizing rechargeable lithium-ion battery technology and multiple charging options for a wide range of applications. Delivering an impressive 2400 lumens at full charge, the fixture offers an integrated dimming control, 360 degree motion sensor, polycrystalline solar panel with 20' cord and two USB interfaces for charging purposes. Suitable for storage, marine, remote location and area lighting where 120V wiring is not available.
- category
- environment
- voltage
- spec →
The HALO Home Smart Plug-In Lamp Dimmer enables convenient control for standard floor/table lamps along with other dimmable plug-in lighting. Wirelessly control fixtures connected to the Plug-In Lamp Dimmer using HALO Home Controllers or App. Combine with HALO Home light fixtures and other Add-on Devices to create Groups and Scenes to conveniently set lighting where you want it. White: HWP1BLE40AWH
- category
- environment
- voltage
- wattage
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 75W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x6 residential framing or shallow commercial installation. Integral Truvolt™ toroidal wound magnetic step down transformer with dual outputs compensates for dimmer losses providing full light output and is extremely low noise. Die cast lamp capsule facilitates aim and focus, unique heat sink configuration lower critical lamp pinch extending life. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Insulation must be kept 3" away from top and sides of the housing. A complete fixture requires two components; a P3MR housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions.
- category
- environment
- voltage
- spec delta
- wattage: 288W → 71W
- spec →
Lumark Parking Garage and Canopy Luminaire
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
The new Steeler LED High Bay is the energy efficient solution for both low bay and high bay applications. Designed with precision optics, the Steeler delivers industry leading performance utilizing the latest in LED technology. The Steeler’s durable and compact design provides quick and easy installation for retrofitting outdated HID and linear fluorescent high bays.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Magnitude Lighting
Full directory →14 rep agencies carry the Magnitude Lighting line across 32 states. Pick your state.
Alabama AL1 agency
- T & T Lighting
Birmingham · Mobile
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA1 agency
- Lighting SystemsCurrent
Sacramento · San Francisco
Colorado CO1 agency
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
Statewide
Florida FL2 agencies
- Lighting DynamicsCooper (Eaton)
Miami
- T & T Lighting
Jacksonville · Panhandle
Georgia GA1 agency
- T & T Lighting
Atlanta · Savannah
Hawaii HI1 agency
Statewide
+22 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.