Led8 W350i N 01
100~240V in, 8W, 350mA Constant Current LED Driver. Driverenclosureincluded.
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
Atlas offers a full line of and brackets and accessories to complete your lighting job. We apply the same quality and durability standards to our accessories as we do our lighting products.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
The LEM08 from Lithonia Lighting® is a UL Listed LED emergency driver that enables LED fixtures to deliver 90 minutes of emergency illumination during a loss of normal power with an initial output of
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
Juno® IC20LED 600LM, dedicated 5-inch LED new construction housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
Integral Driver Monopoint Luminaire
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
The WELL Com is a wireless interface that provides full control over W-DMX enabled lights by allowing you to build and save scenes and chases directly from a smartphone or tablet app. Perfect for mobile entertainers, small venues, or any application where convenient, app-based wireless lighting control is preferred over a traditional DMX console.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 100~240V, 50/60Hz → 240V
- spec →
Replacement face plate and test switch for remote emergency LED drivers Compatible Emergency Driver: NEPK-07LEDUNV: 7W Emergency LED Driver
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
Dimmable ELV, Triac or 0-10V depending on driver used. Same LED light engine for 850 and 1100 lumens (see housings) cUL Listed for Direct Contact with insulation Works with compatible ceilings up to 1¼″ Height allows for use in ceilings with under 5" depth. Ceiling thickness can be reduced from fixture depth. 38° Standard beam with optional 28° and 60° Wet Location Rated for Indoor and Outdoor Use JA8-2016-E, cUL, and Energy Star Qualified Life Span 50,000 Hours L70 U.S. Pat. 10,125,959
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
Wall effect series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing and mounting plate. - Extra-clear, tempered, silk-screened, flat glass diffuser. - Custom molded, anti-aging gasket(s). - Stainless steel external hardware. - Custom MCPCB utilized to maximize heat dissipation and promote long LED life. - Surface effects light emission. - Input voltage: 120-277 V (50 / 60 Hz), integral driver. - Junction box mounting plate included (for 4" octagon box only, provided by others). - The luminaire may be configured with numerous options and multiple standard finishes. Not all options are available in all configurations. Consult factory for more information about specification sheet details. - Product meets Buy American Act (BAA) requirements within ARRA. - 5-year warranty.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 100~240V, 50/60Hz → 120-277 V (50 / 60 Hz)
- spec →
The LITELUME™ LED Gooseneck Premium (LL-GNP) decorative luminaire incorporates a general light distribution for most applications. Constructed from heavy duty die-cast aluminum, the housing boasts outstanding corrosion protection, and unmatched versatility. Featuring 2700k, 3000k, 4000k, 5000k, 6500k CCT field selectable kelvin options along with an integrated photocell & cap. Ideal for multi-family, community and many other commercial & residential applications.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 850W
- spec →
LX1.8 architectural linear luminaire housing from 1.8” wide aluminum extruded profile, available in 2, 4, and 8-Ft length with White, Black finish; integral driver, frosted polycarbonate lens.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 80W
- spec →
The UV-C Control Panel is an integral part of the Cooper Lighting Solutions' UV-C System. Using required clearance pushbuttons and magnetic sensors, the UL8802 Safety Rated control system ensures that the space to be sanitized is vacant and if someone enters the space, assurance that the system will turn off. The control panel accepts up to 24 safety clearance pushbutton inputs and can be wired to one User Safety Panel which is used to turn the system on and off.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
The Iridium i2 WaveStream luminaire merges classic design with cutting edge technology to provide quality illumination and superior optical control. Using the WaveStream LED direct/indirect light engine, its wide batwing distribution makes it an excellent choice for lower ceiling applications and areas where ceiling uniformity is important. Available in 4’ and 8’ sections with a multitude of options, the Iridium i2 WaveStream is well suited for commercial office spaces, schools, libraries and other architectural interiors. The WaveStream LED direct/indirect light engine is also available in several other popular Corelite series including the Element, Loft, Minigator and Vertechs.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 87.7W
- spec →
Fail-Safe HVSL4 combines beauty and robustness in a small scale design. Steel end caps and steel body provides strength while an extruded linear ribbed polycarbonate lens obscures the LED image and spreads light evenly. Ideal for areas where the need for aesthetics and protection from vandalism are critical. Perfect for schools, mental health facilities, hospitals, corridors, dormitories, public rest rooms, common areas, and transit stations
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 14W
- spec →
Fifth Light’s Lighting Control Panel (LCP) is used to control and operate all lighting devices using Digital and Addressable Lighting Interface (DALI) and low-voltage analog signals. It houses the lighting controller, lighting management software and various types of lighting interface modules. Modular design capable to support up to 32 DALI Bus Cards, 48 Digital input cards and 9 Analog Input interfaces hence providing lighting engineers and contractors the flexibility and scalability needed to support all sizes and types of lighting applications, i.e. from small or large facilities, fluorescent to LED, local to networked architecture. Intuitive web based user interface allowing users to manage their lighting system from different computing platforms (desktops, laptops, smart phones, tablets) with access the lighting control network. Factory assembled and pre-wired Lighting Control Panel ready to be installed by the electrical contractor with minimal wiring and eliminating non-valued added on-site panel assembly and wire termination work. LED diagnostics indicators and built-in commissioning mode allowing contractors to easily test and commission the DALI Bus hence reducing the overall commissioning time of a DALI based lighting management system. Built to operate as a local Lighting Control Panel or as part of a distributed lighting control network with multiple lighting control panels and a Central Server Unit for a centralized management of large lighting control system.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → 240V
- spec →
The MicroSet Passive Infrared Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. PIR sensors are considered line-of sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → 277V/UNV
- wattage: 8W → 18W
- spec →
The HALO Home Smart Motion Floodlight incorporates the system's wireless Bluetooth technology into a durable, twin head design for an advanced outdoor lighting solution built for high performance. Features configurable settings for both the motion sensor and floodlight, including sensitivity, duration and scene control, as well as grouping, scheduling, dimming, and white color tuning. The motion sensor works as a HALO Home controller that can be commissioned to control the light it's attached to or an entire Group of HALO Home-enabled lighting for increased motion-activated security. This unit does not require a hub or internet service and can be wirelessly controlled by a HALO Home Dimmer or smartphone/tablet. White - MST20C18W Bronze - MST20C18B (Do not use in combination with non-HALO Home dimmers)
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 20W
- spec →
Interior architectural field selectable cove lighting
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
Lumark Parking Garage and Canopy Luminaire
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 250W
- spec →
Lanterra 1003 Sign is a small 2.5” line voltage sign lighting luminaire that attaches to a wall mounted straight arm and is available in aimable single and dual head configurations along with 90 degree elbow options to meet any desired rotation and vertical adjustment required for a project. Multiple standard stem length arms up to 36” are available. The luminaire also comes with various mounting, beam optics. Various lenses, louvers and color or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- spec →
The Cruze LED Retrofit Kit is our newest LED lighting solution for customers looking to upgrade their fluorescent luminaires to a high performing aesthetically-pleasing LED system without the need to install a complete luminaire. This innovative, high quality retrofit kit is dedicated to the latest solid state lighting and driver technology for optimal performance and energy efficiency. The retrofit kit is engineered for simple and quick installation making it easy to switch to LED.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 14W
- spec →
Designed for use in architectural and commercial applications with limited plenum height, the patented WaveStream optical technology provides uniform, glare-free illumination along with high efficacy, providing the perfect solution for high ceiling applications.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 99W
- spec →
LED emergency battery pack with 7.5 or 10 watts of class 2 power
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → 120V/277V/UNV
- wattage: 8W → 14W
- spec →
The CLS Wallstation is the new standard in intuitive layout and operation with a large circular On/Off button, an universal module with up to 10 button configurations and custom engraving. Each button has a backlight indicator light and offers users with strong tactile feedback. Designed to fit with standard decorator wallplates, CLS Wallstation can be ganged together to meet all project needs.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → 120-347V
- spec →
Up to 85% optical efficiency with a wide variety of shielding options including slots, louvers, and perforation, Williams AI3 provides uniform indirect illumination with plenty of options to enhance the visual appeal of the fixture.
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 86.9W
- spec →
The nLight® AIR rPODLA is a wireless, line-powered wall switch providing a user with local control of a lighting zone featuring on/off, raise/lower, multi-pole, and scene control options. It provides
- category
- environment
- voltage
- spec delta
- voltage: 100~240V, 50/60Hz → UNV
- wattage: 8W → 1W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps MP Lighting
Full directory →1 rep agency carries the MP Lighting line across 1 state. Pick your state.
Hawaii HI1 agency
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.