VIAWETPENDANTASYMMETRIC
Via Wet offers architectural lighting for wet locations in both exterior and interior applications.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Luminoso LED trims are designed for use with Luminoso 2″ Dedicated housings.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
Juno® 4-inch internally adjustable, 700 lumen LED, IC-rated new construction housings cater to a wide range of application possibilities with just a change out of trims. Offering internal
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
1” Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Bullnose reflector with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Compatible Housings: NHIOICD-16, NHIOICDCP-16, NHRIOIC-16 Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 600lm / 10W Optics: Spot, Narrow Flood, Flood
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
LIGHT SOURCE: Integrated LED WIDTH: 6'' HEIGHT: 48'' VOLTAGE: 120-277V WATTAGE: 40W CRI: 90
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
3" LED IC Air-Tight 800 Lm Remodel Housing 0-10V Dimming
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
ADA compliant 3.000" projection x 10.000" height Materials: white frosted acrylic diffusers, brass & steel Output: 8W | 723 - 825 lumens (nominal) CREE LED engine CRI 90+ available in 2700K | 3000K | 3500K 6 standard plated and painted finishes
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
LED ENGINELED engine available with CREE LEDs in 2700K, 3000K, 3500K, or 4000K in standard 93+ CRI. 2 Step MacAdam ellipse allows for color consistency between fixtures. LED mounted to aluminum heat sink for maximum life output and thermal management. LED engine is accessible from below ceiling.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Lumenwerx
Full directory →50 rep agencies carry the LumenWerx line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
Statewide
Arizona AZ1 agency
- Arizona Lighting SalesCurrent
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- Lighting SystemsCurrent
Sacramento · San Francisco
- OCS Lighting & ControlCurrent
San Diego
Los Angeles · Ventura
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Lighting AffiliatesAcuity Brands
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
- One Source AssociatesCurrent
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- LandrethAcuity Brands
Orlando
- Arch. Sales & IlluminationAcuity Brands
Jacksonville
Fort Myers · Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.