91831
The fixture has been designed on the principle of a reflecting multi-shade system, emitting a glare-free, downwardly directed light while radiating a pleasantly delicate glow. The shades are made of hand-blown triple-layered opal glass, which is glossy on top and sandblasted matte on the underside to provide a soft and uniform light distribution. The adjustable upper part of the lamp can be tilted 45 degrees to the right or left by turning the handle on the middle of the arm. The limited edition of Poul Henningsen’s PH 2/2 Question Mark in brass with fine hairlines combines the design and materiality of Henningsen’s elegant classic with mouth-blown opal glass shades that create a beautiful ambiance in any space. Henningsen designed the original table lamp in 1931 based on his three-shade system from 1926, which perfectly combines a glare-free, downwardly directed light with a pleasant upward glow, creating an ideal atmosphere. The lamp was given the name "Question Mark" due to the curvature of its stem. The PH 2/2 Question Mark was produced until the mid-1950s in brass and with different-colored glass shades, including amber, and with various shade holders. The direction of the light could be adjusted by turning the handle on the middle of the stem. It was fitted with a go-through switch. The PH light model numbers refer to the shade size. Each top shade has a corresponding set of middle and lower shades. In the "pure" models, such as the 2/2, the top shade measures about 20 cm, with corresponding lower shades. The PH 3/2 Pendant consists of an approximately 30-centimeter top shade with lower shades from the 2/2 model. The "hybrid" models were introduced to address the need to hang pendants at lower heights. This system has also been used for table, floor, and wall lamps. The "pure" sizes are based on the principle that all three shades can be plotted inside a circle in such a way that the largest diameter of each shade touches the outer periphery of the circle. The proportions between the shades are roughly 3:2:1, which results in a rounder and more compact look compared to the "hybrid" sizes. The 2021 limited edition of PH 2/2 Question Mark comes with an adjustable lamp head that is similar to the original lamp. The adjustable lamp head can rotate 45 degrees to either side. This key feature makes it possible to direct the light wherever it is needed. The adjustable upper part of the lamp can be tilted 45 degrees to the right or left by turning the handle. The shades of mouth-blown, triple-layered, opal glass add a natural individuality to the lamp where each shade represents a work of art. As with the original lamp, the brass will patinate over time and enhance the beautiful authentic look and feel of the 2021 limited edition of PH 2/2 Question Mark. Also made of brushed brass, a go-through switch is located on the stem near the base, alongside a brown fabric cord that complements this exclusive design. Henningsen’s initials are beautifully and discreetly engraved above the cord.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Compact Fixture Housing Indirect Illumination One-Piece Extruded Aluminum Housing 0-10V Dimming to 1% Standard 152.3 Lumens per Watt at 90 CRI
- category
- subcategory
- environment
- spec →
The Corelite Iridium i3 is the latest addition to the Iridium family with a focus on performance and affordability. This curvilinear direct/indirect suspended luminaire offers a wide range of distributions and lumen outputs for individual or continuous row applications. The Iridium i3 is also one the highest performing luminaires in its class with efficacies up to 158 lumens per watt! Optional features such as 90+ CRI, tunable white with VividTune, integrated sensors, and emergency options allow this fixture to meet specific project needs. The Iridium i3 is well suited for commercial office, educational, and healthcare facilities.
- category
- subcategory
- environment
- spec →
ASL4 provides an aesthetically pleasing solution to your demanding and challenging environments. Aluminum extruded housing from 1' to 8', individual or continuous mount, surface or suspended, ambient operating temperatures to 50C, up to 3500 lumens / linear foot, a multitude of LED color temperatures -- ensures a long-lasting luminaire that exceeds expectations
- category
- subcategory
- environment
Power-Trac Transformer. Allows use of Linea track fixtures and pendants on Halo Power-Trac or Lazer Track Finishes.
- category
- subcategory
- environment
- spec →
Metalux WSL - Linear with WaveStream™ technology series redefines linear ambient lighting by offering a balance of the modern contemporary styling with the innovative WaveStream technology to deliver exceptional performance and superior energy savings. WSL’s highly efficient LED system with advance optical design delivers an unparalleled combination of optimal light uniformity for enhanced visual comfort. These exceptional performing Accu-Aim™ optics allow for maximum energy savings while achieving desired light levels.
- category
- subcategory
- environment
- spec →
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T SO Cord with DALI Control (TS-5LT) is used to feed power and control wiring to suspended industrial LED and Fluorescent lighting fixtures from a compatible five-conductor Extender Cable (EC). See the EC specification sheet for details on compatibility.
- category
- subcategory
- environment
- spec →
Meet the new standard in ambient lighting. The Converge series by Neo-Ray pairs clean, minimalist design with the most advanced optical distribution and control on the market. With no traditional, unsightly power cords, the luminaire is elegantly suspended and safely powered through the aircraft cables.
- category
- subcategory
- environment
For installation of exterior rated pendants on catenary systems. Die cast aluminum and stainless steel. Suitable for support cables 3⁄16" to 1⁄2" in diameter. Adjustable up to ± 10° off level.
- category
- subcategory
- environment
- spec →
The Juno® T595 Cable Suspension Kit offers an elegant – almost invisible solution for suspending trac. The T595 Cable Suspension Kit is ideal for applications that demand that trac lighting be
- category
- subcategory
- environment
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →