90289
The fixture is designed based on the principle of a reflective three-shade system, which directs the majority of the light downwards. The shades are made of hand blown opal three-layer glass, which is glossy on top and sandblasted matte on the underside, giving a soft and uniform light distribution. Poul Henningsen designed the three-shade system during 1925/1926. The first lights using the system were designed for an exhibition in Paris. His work with Louis Poulsen continued until his death in 1967. Throughout his life, PH sought to create glare-free lighting; aiming to direct light where it was most needed, and creating soft shadows while using incandescent bulbs as a light source. The PH 3/2 Pendant is a member of the three-shade family and is one of 19 versions available today. Approximately one thousand models have been produced over the years and consisted of table, floor and wall lamps, as well as a number of chandeliers, which were popular in the 30s for lighting private homes with high ceilings. There were countless combination options. The lights were available in different colors, as well as a range of sizes. The first shades were made of metal with a painted underside, such as white, gold or silver depending on whether diffuse, warm or cold light was desired. Glass was later introduced to the three-shade system. In addition to the downward-directed light, glass lamps illuminated the room. PH was the first person to pursue a scientific approach to light and use the logarithmic spiral as a basis. By using a design based on the logarithmic spiral, he achieved even distribution of light over the entire curve of the shade. This even light distribution, together with the diffuse reflection through the glass, made it possible to control glare and shadow. Each shade reduces the amount of light equally due to their distance from the light source. The PH light model numbers refer to the shade size. Each top shade had a corresponding set of middle and lower shades. In the pure models, such as the 2/2, the top shade has a size of about 20 cm, with corresponding lower shades. The PH 3/2 Pendant consists of an approximately 30 cm top shade, but uses lower shades from the 2/2 model. These hybrid models were introduced due to the desire to hang the pendants at lower heights.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The track pack comes complete and ready to install with mounting hardware and track heads. Components include (1) 4’ single circuit track, (2) end caps, (1) floating canopy feed, and (3 or 4) 1000lm MAX Mini LED track heads. The practical style fits almost any design criteria. Input Voltage: 120V Finish: Black or White Lumens / Wattage Per Head: Up to 1000lm / 13W Color Temperature: 2700K, 3000K, 3500K or 4000K Color Rendering Index: 90+ CRI Beam Spread: 41° Narrow Flood Included: NT-302 (4' Track) NT-307 (Floating Canopy Feed) NT-318 (Dead End Caps) NTE-864 (MAX Mini LED Track Heads)
- category
- subcategory
- environment
- voltage
- lumens
- wattage
- spec →
Lotus reimagines the classic pendant with a fresh, modern twist. This single-light fixture features a sleek satin nickel finish that balances timeless elegance with contemporary flair. Compact yet captivating, Lotus brings a refined statement to any space, effortlessly blending tradition with innovation.
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- +1 more
- spec →
The LETO 5 spotlight blends style together with multiple levels of application and uses. A favorite with museums and art enthusiasts alike, it comes with fully controllable directional adjustments and features the stylish canopy mounting system.
- category
- subcategory
- environment
- voltage
- lumens
- spec delta
- wattage: 15W → 8.2W
- spec →
The Guyed Pendant by Sean Lavin for Tech Lighting is part of the Trellis collection which represents modern, minimalist lighting in its purest form. Each of the pendant profiles feature an optic which brilliantly illuminates while minimizing glare. Guyed features a bold cylindrical metal body with a spherical crystal optic and optional complementary spherical metal detail that can be placed anywhere along the body. The multitude of canopy options ship with the cable attached which can be easily cut in the field to size for the ultimate in versatility. Optional spacers facilitate unique geometries while adding depth and dimension to this stunning collection. • Includes optional complementary spherical metal detail that can be placed anywhere along the body • Canopy ships with 12 feet of cable per pendant which can be easily cut in the field. Pendant feature a quick-connect simplifying installation • Each port in the canopy comes with a plug to cover an unused ports • This item is made of natural brass. It is a living finish that will patina and warm with age which adds richness. If it gets an uneven patina or spots, a brass cleaner can restore the finishtallation • Optional spacers facilitate unique geometries while adding depth and dimension to this stunning collection. • Protected by a 5-year warranty. Please visit the “About Us” Page on techlighting.com for more for warranty details
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- spec →
Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 15W → 960W
- spec →
PrentaLux or Printed Light, the 3D printed lighting brand for Cooper Lighting Solutions is not only at the forefront of innovation for lighting technology, but now a part of the circular economy (Reduce. Reuse. Recycle.) with sustainable and environmentally responsible products. Our products are a part of the social and environmental consciousness to; Choose, better. Build, better. Be, better. Join us.
- category
- subcategory
- environment
- mounting
- voltage
- spec →
This family of floodlights is available in various sizes and light distributions. When paired with the comprehensive range of accessories, this family of luminaires sets the floodlighting standard with regards to cost effectiveness, compactness and efficiency.
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
The R620L Series 15W Adjustable Beam LED Cylinder Series with Canopy Mount option is an economical and affordable fixture, with a simple and timeless cylindrical aesthetic. It features a proprietary,
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
Born from a love of color, these striking pieces draw inspiration from the rich hues and undulating topography of Southern California. Alternating layers of opaque and transparent colors are applied to clear glass. Overlaps create opportunities for new colors to be formed, which adds to the depth of each piece. The intense color is then complemented by the simple shape. No molds are used, and each shape is unique. Hand blown and shaped in lead free crystal. Designed by Caleb Siemon & Carmen Salazar. Made in California. Signed. View / Download Tearsheet SPECSDimensions*: 9.0” Ø, 8.5” HMaterials: glass, metalProduct weight*: 5.5 lbsLight source: medium base E26 socket**Lamping: E26 base, G25 lamp, 40 W max250 V AC MaxRound canopy with cloth covered SJT-3 CableCanopy dimensions: 5” Ø, 0.3” Field adjustable drop length: 0’6” min - 6’0” maxCanopy finish matches Metal Finish.Suitable for sloped ceilingsUL listed for damp locationsC-UL-US | BAA GLASS FINISHStone (GL-122)Aqua (GL-051)Cranberry (GL-041)Borrego (GL-241)Amber (GL-053) METAL FINISHSatin NickelBrushed BrassDark BronzeBlack CORD COLORBlack ClothTaupe ClothSilver Cloth LAMPINGNo BulbG25 LED bulb included - 2700 K, 90 CRI, 3.8 W, 350 lumens, 120 V AC * Each piece of hand-blown glass is a unique work of art. Dimensions, weight, and color will vary. When multiple fixtures are installed next to each other, expect some variation in shape and color. ** Alternate voltages and socket types are available upon request.
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 15W → 40W
- spec →
3-1/2-Inch Indoor Round Flexible Cable Pendant Mount Cylinder. Color Rendering Index : 80-89,90-100; Correlated Color Temperature : 2700K,3000K,3500K,4000K; Environment : Indoor; Light Distribution Detail : Spot,Medium,Flood,Wide Flood,Wall Wash; Light Source : LED; Listings : cCSAus,Damp Location,ENERGY STAR® Certified; Lumen Output : 1001-1500,1501-2000; Mounting : Flexible Cable Pendant, Track Mount,Flexible Cable Pendant, Canopy Mount
- category
- subcategory
- environment
- mounting
- voltage
- spec delta
- lumens: 777 → 2285
- spec →
3 Points Rectangular Mirrored Canopy
- category
- subcategory
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →