RFM3T435DW
Litetronics has simplified the process of converting fluorescent troffers to LED and at the same time provide stepdimming functionality without the need for additional wires or dimmer switches. Our Tri-Level “Switch” Dimmable 2×4 Magnetic Retrofits allow the user to cycle through 3 distinct light levels using only the existing line voltage wiring and light switch. Upon turning on, the initial light level will be 100% but subsequent flips of the switch will reduce the level to 66% and then 33% and then OFF. To minimize installation costs, each unit is equipped with rare earth magnets at both ends, allowing the installer to magnetically attach the retrofit to the inside of the troffer, leaving them with two free hands for wiring and alignment before securing the final screws. The Magnetic Retrofit generates up to 157 LPW of ficker free, consistent light, which results in a significant reduction in energy use compared to fluorescent fixtures and an improved overall look for your space. Another key benefit is a reduction in maintenance. This LED retrofit is rated for a 100,000-hour life (@L70), meaning that you’ll see very little light loss over a long period of time, and to provide further peace of mind, it’s backed by a 10-year warranty.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Fail-Safe MRI-ATR is an architectural troffer specifically designed for MRI rooms in healthcare facilities and medical spaces because of its non-ferrous construction. Available in 1'x4', 2'x2', and 2'x4' sizes, the MRI-ATR has a slim frame design allowing a fully luminous aesthetic with only the illuminated lens being visible. The fixture also has multi-channel MRI filters and a remote driver.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +2 more
- wattage: 10W → 100W
- spec →
The Metalux Accord™ LED Series combines optimal illumination design and contemporary styling with Cooper's Linear LED Platform. Accord’s high performance LED system with advanced light distribution and attractive appearance deliver unprecedented energy savings, comfort and aesthetics. And, it simplifies installation and maintenance with a tool-less design.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- wattage: 10W → 30.2W
- spec →
LD2B combines energy efficiency with superior cutoff, optical performance and control
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- beam_angle: 5° → 40°
- spec →
Replace up to 9 standard panels with just 1! These fixtures feature selectable lumen and color temperature options, reducing stocking complexity and providing additional flexibility for contractors.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
UL Type C LED U-Bend Lamps are the most energyefficient, reliable and dimmable solution for replacing fluorescent tubes in T8 U-bend troffers. Designed to pro...
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
Sealed Recessed Troffer 6” 6″ Wide in Four & Six Foot Lengths Available with Low Voltage Controller Setup 0-10V Dimming to 1% Standard Provided as Single Luminaire Anti-Microbial White Powdercoat Standard Available in Multi-Function, Exam, Ambient, Reading Suitable for Recessed Grid or Hardlid Installation B.A.A. & B.A.B.A Compliant Made in the USA by a Family Owned US Corporation SPEC SHEET
- category
- subcategory
- environment
- mounting
- voltage
- CRI
- +2 more
- cct: 3500K → 3000K
- spec →
The selectable flat panel features edge-lit and PMMA light guide plate design, slim and low profile enables superior uniformity. Comes in 2x2, 2x4 and 1x4 configurations. Ideal for standard T-bar and narrow grid drop ceiling to replace the fluorescent troffer in offices, supermarkets, schools and other indoor applications.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +2 more
- wattage: 10W → 50W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Litetronics
Full directory →41 rep agencies carry the Litetronics line across 49 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- C.J.S. LightingAcuity Brands
Sacramento
San Francisco
Fresno · Los Angeles · San Diego · Ventura
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
Statewide
Florida FL4 agencies
- Florida Lighting AssociatesCurrent
Fort Myers · Orlando · Tampa
- Lighting SolutionsCooper (Eaton)
Panhandle
Jacksonville
Miami
Georgia GA2 agencies
Savannah
Atlanta
+39 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.