HBC24040
The LED High Bay PL delivers top of the line efficiency, durability and versatility, resulting in significant energy savings, low maintenance and adaptability across a wide range of high ceiling applications. The PL’s unique look sets it apart from the competition, but there’s more to this fixture than aesthetics. The one-piece polycarbonate prismatic lens distributes even illumination, minimizing glare while also guaranteeing long term durability. The die cast aluminum heat sink separates the LEDs from the driver, creating enhanced air flow, lower operating temperature and better efficiency. Each unit can accomodate a pluggable sensor that enables increased energy saving features such as occupancy sensing and daylight harvesting, both of which can be adjusted via remote control. Our Smart Sensor enables the same energy saving features, but can be setup and managed on a group level via the LiteSmart mobile app.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Metalux LED High Bay with superior performance in a durable, compact design
- category
- environment
- voltage
- CCT
- wattage
- beam angle
- +1 more
- voltage: 120V/277V → UNV
- spec →
IC Rated for direct contact with insulation Canless Module works with Koto™ frames and power packs Driver specified for 120V (Triac/ELV) or 120/277V (0-10V/Triac/ELV) dimming Works in 2″, 3″, 4″ and 6″ Canless Koto™ twist-on trims Push-&-Twist connector on module for easy installation Standard 38° Lens installed, 25° and 60° lens included with each module - Optional Lens: 18° (EP731C) Optional: Louver ( L45 ), Linear Lens ( L46 ), Spread Lens ( L47 ), Frosted Lens ( L49 ), White Koto Snoot ( L50W ). Black Koto Snoot ( L50B ), Color Shifter ( L51 ), Blue Lens ( L52 ), Pink Lens ( L53 ) Excellent color rendering 95+ CRI Offered in 2700K, 3000K, 3500K, 4000K, Sunset Dimming (Dims from 3000K to 1800K), & Human Centric (Dims from 4000K to 2200K) Title 24 JA8-2022 Compliant Life span of 50,000 hours L70 Covered by U.S. PATENTS and Patents Pending Optional Reflectors: 15º (EP735C), 25º (EP736C), 38º (EP737C), 60º (EP738C)
- category
- environment
- voltage
- CCT
- beam angle
Pro-Grade High Output (14,500LM) Engineered for maximum visibility, this fixture delivers a massive 14,500 lumens at an impressive 116LM/W efficiency. The 4000K Neutral White light provides a clear, professional glow that enhances safety and security for large-scale commercial perimeters. Optimized 0-10V Dimming Supports standard 0-10V dimming protocols (AC 120-277V range), allowing you to integrate with motion sensors or building management systems. Perfect for reducing energy costs during off-peak hours without sacrificing security. Heavy-Duty Commercial Build Housing: Premium die-cast aluminum with a corrosion-resistant Dark Bronze finish. Thermal Management: Integrated heat-sink fins maximize LED life by maintaining cool operating temperatures. Size: 360.5 x 235 x 180mm (Industry-standard footprint for easy one-to-one replacements). Weatherproof & All-Season Reliable IP65 Wet Location Rated to withstand heavy rain, snow, and salt air. Designed to operate flawlessly in extreme temperatures ranging from -40°F to +104°F, making it the ultimate choice for any climate. Certified Safety & Durability Built to UL Standards, ensuring rigorous testing for electrical safety and structural longevity. This fixture is a reliable, long-term solution for parking lots, warehouses, loading docks, and storefronts.
- category
- environment
- voltage
- CCT
- beam angle
- spec →
Ø13/16” 120V or 277V dimmable plug-and-play LED luminaire The proprietary BSK21 is a miniature linear, 120V or 277V line voltage LED luminaire that mounts, powers and aims with great ease. The extruded aluminum fixture mounts with a pair of small spring clips. For non-dimming operation, fixtures are powered by plugging in a grounded power cord. A plug-in hardwire adaptor enables fixtures to dim to 5% with 0-10V controls. Seamless, luminous runs up to 40’ are achieved by joining fixtures with end-to-end quick connects. Accessory jumper cables are available for installations requiring fixtures to be physically separated. The SK21 is available in five lengths with four color temperatures and 95 CRI LEDs. BENEFITS: Modular with quick connects Simple, robust connections Seamless row mount up to 40 feet Uniform luminance throughout connections Effortless dimming integration Flexible for corners and direction changes
- category
- environment
- voltage
- CCT
- beam angle
- spec →
Our entire team takes great pride in our dedication to providing innovative in-stock lighting solutions that typically ship in 2-3 days with the product reliability and quality that you can always depend on from ETi SSL.
- category
- environment
- voltage
- CCT
- beam angle
- spec delta
- wattage: 240W → 48W
- spec →
Housing: Die Cast and Extruded Aluminum Housing with Separate Driver Compartment in Mounting Arm. Listing & Ratings: ETL: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Extrusion. Finish: Textured Architectural Black Powdercoat Finish. Wiring: Includes 15´ 3-Wire Cord. Mounting Options: 4″ or 5″ Die Cast Aluminum Pole Clamps COB LED: LED COB Wattage: LED: 2x5w; System: 10w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Provided with Factory-Installed Photocell That is Internally Wired for Switching Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -30°C to +50°C Environment.
- category
- environment
- voltage
- CCT
- beam angle
- spec delta
- wattage: 240W → 10W
- spec →
The PFX-5608 is a highly versatile, 4-foot vapor-tight LED luminaire designed for durability and precision in demanding environments. This sensor-ready fixture features field-selectable CCT (3500K, 4000K, and 5000K) and tri-lumen output ranging from 5,000 to 7,000 nominal lumens, allowing for complete on-site customization. Built to last, it boasts an impressive L70 life of 178,000 hours and a rugged polycarbonate housing with an IK10 impact rating. It is engineered for extreme conditions with an IP65 ingress protection rating and an operating temperature range of -40 Degree C to 43 Degree C . The unit comes standard with a 0-10VDC dimming driver and offers optional emergency backups or NSF certification for food equipment zones. Installation is simplified with included surface mount kits and v-hooks, making it an ideal choice for both new construction and retrofits.
- category
- environment
- voltage
- beam angle
- spec delta
- voltage: 120V/277V → UNV
- cct: 4000K → 3500K
- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 240W → 850W
- spec →
The Ephesus LumaSport 12 is engineered with precision optics and advanced glare control that minimizes light spill and sky glow. Designed for communities that value environmental stewardship and DarkSky compliance, the system delivers powerful illumination, reliable performance, and simplified installation through its remote power architecture.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 277-480V
- wattage: 240W → 987W
- spec →
FCC LED combines security construction features with energy savings technology. This corner mount fixture uses a one-piece clamshell housing, security lensing, and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. Energy efficient LEDs and standard 0-10V dimming driver make this corner correctional fixture the ideal choice for your next project.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 240W → 14W
- spec →
The passive infrared Extreme Temperature Sensor provides consistent, stable coverage where extreme heat, cold or humidity must be accommodated, and where there are wide fluctuations in temperature. Temperature compensating circuitry stabilizes sensitivity at temperatures –40°F to 125°F (-40°C to 52°C). Ambient light control circuit to avoid False ON/OFF from brief changes in background light. Lighting sweep function with selectable DIP Switch prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems
- category
- environment
- voltage
- beam angle
- spec delta
- voltage: 120V/277V → 120V
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 277V/UNV
- wattage: 240W → 18W
- beam_angle: 40° → 90°
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Litetronics
Full directory →41 rep agencies carry the Litetronics line across 49 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- C.J.S. LightingAcuity Brands
Sacramento
San Francisco
Fresno · Los Angeles · San Diego · Ventura
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
Statewide
Florida FL4 agencies
- Florida Lighting AssociatesCurrent
Fort Myers · Orlando · Tampa
- Lighting SolutionsCooper (Eaton)
Panhandle
Jacksonville
Miami
Georgia GA2 agencies
Savannah
Atlanta
+39 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.