HBC11550
The LED High Bay PL delivers top of the line efficiency, durability and versatility, resulting in significant energy savings, low maintenance and adaptability across a wide range of high ceiling applications. The PL’s unique look sets it apart from the competition, but there’s more to this fixture than aesthetics. The one-piece polycarbonate prismatic lens distributes even illumination, minimizing glare while also guaranteeing long term durability. The die cast aluminum heat sink separates the LEDs from the driver, creating enhanced air flow, lower operating temperature and better efficiency. Each unit can accomodate a pluggable sensor that enables increased energy saving features such as occupancy sensing and daylight harvesting, both of which can be adjusted via remote control. Our Smart Sensor enables the same energy saving features, but can be setup and managed on a group level via the LiteSmart mobile app.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →Ultra-Bright Daylight Output (15,000LM) Engineered for maximum security and visibility, this fixture delivers a massive 15,000 lumens at a superior 120LM/W efficiency. The 5000K Daylight White creates a bright, crisp environment that effectively eliminates dark spots and enhances surveillance camera clarity. Precision 0-10V Dimming Supports seamless 0-10V dimming (AC 120-277V range), giving you full control over light intensity. Easily integrate with smart sensors or timers to maximize energy savings during daylight hours while ensuring a well-lit perimeter at night. Commercial-Grade Rugged Build Housing: Heavy-duty die-cast aluminum with a corrosion-resistant Dark Bronze finish, designed to withstand the test of time. Thermal Management: Advanced heat-dissipating fins optimize airflow and LED longevity. Size: 360.5 x 235 x 180mm (Standard commercial footprint for effortless installation). IP65 Wet Rated & All-Weather Ready Built for the elements, this fixture is Wet Location Rated to resist heavy rain, snow, and humidity. With an operating range of -40°F to +104°F, it delivers unwavering performance in both freezing winters and intense summer heat. Certified Safety Standards Fully compliant with UL Standards, guaranteeing top-tier electrical safety and structural reliability. A professional-grade solution for loading docks, warehouses, commercial building exteriors, and high-traffic parking areas.
- category
- environment
- voltage
- CCT
- beam angle
- spec →
The EarthTronics LED Adjustable Wall Packs has a slim profile design. They can be locked into any angle ranging from 0° to 90° providing exterior security illumination where required. The durable die cast aluminum housing is powder coated to maintain the fixture appearance for several years. Select from 3000K, 4000K or 5000K color temperatures as well as several different lumen levels, this is easily done by the dial switch located on the product. It features a high 80+ CRI providing an excellent light source for nearly any task. The polycarbonate lens provides durability and resistance impact, and the conduit entry points allow direct wall or junction box mounting. These adjustable wall pack fixtures feature 120-347V universal voltage. This fixture can withstand the elements, it’s made to last in the outdoors with the IP65 rating and a minimum start temperature of -40°F. They are equipped with a 0 – 10 volt continuous dimming driver with a dimming range capability of 10% to 100%. The long 50,000-hour life is backup with a 10 year limited warranty. The wall pack fixture requires a properly anchored UL recognized junction box for proper installation. Night sky complaint. Photocell built-in.
- category
- environment
- voltage
- CCT
- wattage
- beam angle
- +1 more
- voltage: 120V/277V → 120V/347V/UNV
Halco # 39878 Adjustable Wallpack, Selectable Wattage 100W-110W-120W and Color 3000K-4000K-5000K, 120-277VAC, Photocell-Enable/Disable for building or walkway lighting and security
- category
- environment
- voltage
- CCT
- wattage
- spec →
Efficient Illumination for High-Ceiling Spaces. Signum 16 is a foundational high-ceiling luminaire that reflects Meteor’s early entry into the large-scale architectural lighting market. Its perforated cylindrical form balances visual presence with restraint, making it a familiar yet enduring solution for expansive interior spaces. With efficiency and clarity in mind, Signum 16 focuses on delivering consistent, high-quality white light without unnecessary complexity. With output reaching up to 23,000 lumens at 117 lm/W, Signum 16 provides reliable illumination for large volumes while maintaining energy performance. DMX control compatibility allows the fixture to integrate into more advanced lighting systems, supporting architectural environments that require both scale and control.
- category
- environment
- voltage
- CCT
- beam angle
- spec delta
- wattage: 115W → 195W
- spec →
The OUC4 LED Canopy offers high performance in an economical and practical design. The OUC4 achieves even light distribution using a prismatic, frosted lens that is UV- and fire-resistant while its die-cast aluminum housing has convenient knockouts for easy J-Box, surface mount, or pendant installations. The OUC4 is an efficient outdoor canopy lighting solution for exterior ceilings or for parking garages, carports, covered walkways, or other commercial spaces, and is equipped with an integrated heat sink and a Type V distribution precision lens. The OUC4 offers two models with selectable wattages (75W/60W/45W), (120W/96W/72W) and selectable CCT (3000K/4000K/5000K). Factory mounted photocell standard.
- category
- environment
- voltage
- CCT
- wattage
- spec →
Housing: Die Cast Aluminum Housing, ½˝ Coin Plugs with O-rings for Conduit & Photocell on Two Sides & Back, Nickel-Plated Stainless Steel Hardware Listing & Ratings: ETL: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. ADA Compliant. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED Low Profile LumaLens Opal Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit Radiant LED: Aluminum Boards Wattage: Array: 21.7w, System: 27w; (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment
- category
- environment
- voltage
- wattage
- beam angle
- spec delta
- cct: 5000K → 3000K
- spec →
The PFX-3606 is a versatile round canopy luminaire designed for high-performance lighting in wet locations. This sensor-ready fixture features field-selectable technology, allowing users to choose between three color temperatures (3000K, 4000K, or 5000K) and five lumen outputs ranging from approximately 3,000 to 11,000 lumens. Constructed with a durable die-cast aluminum housing and a polycarbonate lens, it boasts an IP65 ingress rating and IK10 impact protection. The unit is equipped with standard 0-10V dimming, an integrated photocell, and 6kV surge protection for enhanced reliability. Its long-life LEDs are rated for up to 167,000 hours, ensuring significantly reduced maintenance costs over time. Supporting both surface and pendant mounting, the PFX-3606 is a flexible solution for various commercial and industrial environments.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- beam_angle: 40° → 135°
- spec →
The LITELUME™ LED Heavy Duty Dock Light ( LL-HDDL ) is a high performance robust LED solution designed with versatility. Rugged, die-cast aluminum housing with UV resistant marine grade powder coat finish and a Premium LED driver with High Performance LED's. Applications include waterfront, marinas, docking, commercial and industrial corridors, loading areas and general work zones
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 115W → 28W
- spec →
Fail-Safe Vandal Resistant 11" Round, Wall or Ceiling, 10 - 25 Watt, IP65
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 115W → 25W
- spec →
The Fifth Light Sensor Powerpack provides power to low voltage sensors and communicates occupancy data status to the Fifth Light system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OAWC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. Self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Litetronics
Full directory →41 rep agencies carry the Litetronics line across 49 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- C.J.S. LightingAcuity Brands
Sacramento
San Francisco
Fresno · Los Angeles · San Diego · Ventura
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
Statewide
Florida FL4 agencies
- Florida Lighting AssociatesCurrent
Fort Myers · Orlando · Tampa
- Lighting SolutionsCooper (Eaton)
Panhandle
Jacksonville
Miami
Georgia GA2 agencies
Savannah
Atlanta
+39 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.