LYTP6S
The next generation of Lightolier LyteProfile LED downlights have been redesigned to be flexible for changing project needs. Now with a plug-and-play power and control line receptacle, the reflector and light engine combo is quick and easy to install. The newly designed architecture uses the same frame as the EasyLyte and Calculite families. The shared frame concept creates a future-proof luminaire that provides job site flexibility in both installation and inspection, while minimizing the impact of unexpected design changes and offering a good selection of choices.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The PFX-5310 is a versatile 4-foot architectural linear fixture designed for direct and indirect lighting. It features field-selectable color temperatures ranging from 2700K to 5000K and four adjustable lumen output settings, reaching up to 5,078 nominal lumens. Built for durability, the unit includes a premium powder-coat housing and a long-life LED system rated for up to 175,000 hours. It offers flexible mounting options, including suspension, surface, wall, and recessed kits, making it suitable for diverse architectural environments. The fixture also supports toolless linking of up to 10 units at 120V for streamlined installation. Additionally, it is cULus listed for damp locations and features 2.5kV surge protection for enhanced electrical reliability.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
The WCSDB Commercial downlight is equipped with a convenient selectable color temperature and wattage dip switch, making it versatile for a wide range of applications.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- spec →
Slim design with clean lines and square forms. Edgelit direct/indirect distribution of 55% downlighting and 45% uplighting.
- category
- subcategory
- environment
- lumens
- CRI
- wattage
- +2 more
- voltage: UNV → 347V
- cct: 2700K → 3000K
- spec →
The next generation of lighting is here with the architecturally inspired Divide™ series powered by WaveStream™ LED. The broad offering of efficient LED products include a complete family of recessed, linear suspended, surface, and wall mounted luminaires. The Divide’s modern, ultra-shallow design is complemented with functionally engineered features for practical use. High performing Accu-Aim™ optics allow for maximum energy savings while achieving desired light levels. Available in 4’, 8’ and continuous run lengths, the Corelite Divide Surface Series is ideal for open offices, private offices, retail, hospitals and educational facilities.
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- cct: 2700K → 3000/3500/4000K
- spec →
6 inch LED recessed downlight designed for vandal resistant or sealed / medical applications. Lumen packages from 1000 - 7000 lumens with color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology. Choose from an open reflector, or an enclosed version with a bottom lens or a bottom trim ring with lens. Available with lens thicknesses up to 0.375", with standard or tamper-resistant stainless steel countersunk screws.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
HALO 3” shallow new construction square LED downlight / directional housings and trims
- category
- subcategory
- environment
- voltage
- CCT
- dimming
- +1 more
- lumens: 5000 → 1727
- wattage: 55W → 20W
- spec →
Engineered for restricted plenum spaces, the 3" Ultra-Shallow Downlights deliver boutique-level precision in a compact 2.5" housing. Field-interchangeable optics ensure designers have complete control over beam spread, while translating center beam technology guarantees the light always hits its target—eliminating side glare or shadows. Perfect for tight spaces where architectural control and refined illumination matter most.
- category
- subcategory
- environment
- voltage
- CCT
- dimming
- spec →
The Boca 631 is a tiny dual-lens in-ground fixture, 3 inches in diameter, for use with a low-voltage MR16 lamp. The non-adjustable beam provides a crisp, white halogen light source for grazing or uplighting in constricted areas. The dual lens design greatly reduces the top glass temperature and allows for installation in pedestrian areas. Designed for recess mounting in concrete, brick, stone or dirt, it is suitable for drive-over applications.
- category
- subcategory
- environment
- voltage
- CCT
- wattage
- +1 more
- voltage: UNV → 120V
- spec →
The RCG LED series by Metalux provides a simplistic, clean look with uniform illumination making it ideal for any indoor environment. Powered by Eaton’s most advanced linear LED technology, the RCG series delivers outstanding efficacy and can be fitted with standard flush and asymmetric flush lenses. Equipped with a unique endcap, the RCG4 can be row mounted in standard grid ceilings and is ideal for use in schools, offices, healthcare and retail spaces.
- category
- subcategory
- environment
- voltage
- lumens
- dimming
- +1 more
- cct: 2700K → 3000/3500/4000K
- spec →
The Define series by Neo-Ray characterizes the ultimate in minimalist simplicity by providing clean, uniform lines of illumination in virtually any architectural environment. The Define series delivers outstanding efficacy in a variety of profile widths. 1”, 2”, 3”, 4” and 5” luminaire widths are all specifiable to the nearest inch in length and can be fitted with standard flush, regress, proud and asymmetric lensing. In wall 90- degree corners and wall to ceiling 90 degree transitions can all be ordered as standard components and blend seamlessly into the most complex architectural spaces. Robust construction and adaptable, modular components make installation simple and ensure straight runs.
- category
- subcategory
- environment
- voltage
- CCT
- dimming
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →