Solitaire Impress Masters
The Solitaire Impress modular dimming system provides 18-preset dimming control, with capacitive touch buttons and sliders. Master controllers are available with six, 0-10V (Soli 10V) or phase control outputs (STM6) and have a 2000-watt load capacity with up to 800 watts per channel. The 0-10V version (Soli 10) is an industry first providing a single solution for mixed 0-10 and DMX LED applications with a UL electronic ballast rating. The Soli 10V master was recognized in the 2013 IES progress report. A DMX only master (Soli DMX) is also available.
Cross-References
Top equivalents — 11 across 9 brands
Compare top 3 →- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- wattage
- dimming
- spec →
Atlas offers a lineup of accessories that complement our lighting fixtures. We apply the same quality and durability standards to our accessories as we do our other products.
- category
- environment
- wattage
- dimming
- spec →
Bypass Shunt Relays Lighting
- category
- environment
- wattage
- dimming
- spec →
QT-CAB-eLED+0-10V: Versatile interior LED power supply 60W-1000W LED power supply. IC rated, 0-10V dimming, UL listed. Supports up to 6 drivers/module.
- category
- environment
- wattage
- dimming
- spec →
Sensor Control Programmable
- category
- environment
- wattage
- dimming
- spec →
The Intelligent Lighting Controls line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the ILC family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.
- category
- environment
- wattage
- dimming
- spec →
Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The DT VS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.
- category
- environment
- wattage
- dimming
- spec →
The RC6R is a 6“ LED, Non-IC Commercial Flat Frame-in Kit and is available with multiple Trim styles. Designed for use in non-insulated ceilings, Insulation material must be kept a minimum of 3” from fixture. Available with a 14W, 23W, 30W or 45W high efficacy LED engine and universal, dimmable drivers. The special optical diffuser produces high lumen transmission and even illumination. Suitable for Wet Locations.
- category
- environment
- wattage
- dimming
- spec →
Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Occupancy Sensor. The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.
- category
- environment
- wattage
- dimming
- spec →
The LEDH-CFK9 is an 9“ LED, Non-IC Commercial Flat Frame-in Kit and is available with multiple Trim styles. Designed for use in non-insulated ceilings, Insulation material must be kept a minimum of 3” from fixture. Available with a 14W, 23W, 30W or 45W high efficacy LED engine and universal, dimmable drivers. The special optical diffuser produces high lumen transmission and even illumination. Suitable for Wet Locations.
- category
- environment
- wattage
- dimming
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →