EXIT/EMERGENCY COMBO - SERIES EXEMSLICNYC
STEEL - NEW YORK CITY New York City compliant 8" Red letters. Single face. Black or white housing color. Field selectable knockout chevron directional indicators.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Rival RCS Series Steel Exit/Emergency Combo Light is encased in a heavy duty 20 gauge steel housing with a white powder coat finish. It features dual voltage input and long life, energy efficient LEDs. The three powerful 12W incandescent lamps provide ample lighting in an emergency. It is equipped with 36W sealed led calcium batteries with available remote capacity and universal, field selectable chevrons. It is UL damp location listed (indoor).
- category
- environment
- voltage
- wattage
- housing
- spec delta
- voltage: 120/277V → 277V
- spec →
The LPXW series provides a UL924 compliant solution for outdoor exit requirements. The fixture is wet location listed with a temperature rating of (- 20°C to 50°C ). The UV stabilized polycarbonate housing is available in white, grey or black with red or green Exit letters. Labor savings self-diagnostics that perform required monthly and yearly testing are standard for the self-powered exits.
- category
- environment
- voltage
- spec delta
- wattage: 12W → 3.4W
- spec →
The LX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Top, end or back
- category
- environment
- voltage
- housing
- spec delta
- wattage: 12W → 2W
- spec →
Nora's new 20 gauge steel body exit units are suitable for rugged applications and New York City approved. Exit sign utilizing Light Emitting Diode (LED) modules as the primary light source for economy operation NX-550 includes a backup NiCad battery for 90 minutes operation under emergency applications where primary power source has been interrupted or terminated. NX-550-LED/R - Red Letters with White Housing NX-505-LED/RB - Red Letters with Black Housing BODY 14-5/8" Width X 10-1/2" Height X 2-1/4" Depth 20 gauge Steel construction Black & White finish FACE Single or double face 8" high text with 1" stroke Snap-out chevron New York approved MOUNTING Universal - Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL Voltage Dual 120V / 277V input (0.038A / 0.017A) Automatic solid state switching and charging Light Source Long life LED sources Battery NiCad (nickel-cadmium) 3.7 Watts @ 120V replaceable battery included 90 minute emergency operation Internal solid state charging circuit Testing High-charge/ready operation indicator light Test button Circuitry Protection Short circuit protection LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL Listed NFPA-101 Meets City of New York emergency code requirements (NY Approved) Suitable for damp location
- category
- environment
- voltage
- housing
- spec delta
- wattage: 12W → 4.8W
Single or Double faced. 120V/277V with battery backup and hanger bars. For wall or ceiling mount. UL or ETL listed. Removable chevrons (arrows) included for jobsite customization.
- category
- environment
- voltage
- spec →
PFX 5503 Thin Thermoplastic EXIT Sign. Ultra bright, energy efficient, long life Red or Green LEDs. Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. 1.2V long life, maintenance-free, rechargeable NiCd battery (EM models only). Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- category
- environment
- voltage
- spec delta
- voltage: 120/277V → UNV
- spec →
Low-Profile wet location Exit and Emergency combo unit, 2.5" deep. Available in white, black and grey. Stocked in selectable Red/Green for convenience. Long lasting, efficient, ultra bright white LED lamp heads. 1.0W (1 LEDs x 1.0 watt) per head. Adjustable LED lamp heads provide up to 18-ft center-to center spacing with 3-ft path of egress at 7.5-ft mounting height.
- category
- environment
- voltage
- spec delta
- voltage: 120/277V → UNV
- wattage: 12W → 2W
- spec →
Our Edge-Lit features an integrated and pivot system that allows it to be installed on the wall, ceiling or sloped surface. Available in Red or Green lettering, single face on mirrored acrylic panel
- category
- environment
- voltage
- spec delta
- voltage: 120/277V → 277V
- wattage: 12W → 2W
- spec →
The Fail-Safe EXL offers buyers one of the best high-abuse, specification-grade exit signs on the market. Its architectural low profile combines 14-gauge steel and a 1/8-inch polycarbonate lens to withstand the toughest environments. The door attaches to the housing with four tamper-resistant fasteners. LEDs power the unit for energy-efficient, even illumination. These fixtures are UL/cUL listed for damp locations. The EXL is specifically designed for use in public access areas where safety and security are critical; it is ideal for use in maximum security correctional facilities, public housing, schools, psychiatric wards, detention centers, military barracks, parks, and hospitals.
- category
- environment
- voltage
- housing
- spec delta
- voltage: 120/277V → 120V
PRODUCT SPECIFICATIONS ILLUMINATION • Two, 6V/12V adjustable bi-pin halogen lamp heads. ELECTRICAL • Dual 120V/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • LVD (low voltage disconnect) prevents battery from deep discharge. • 6V Sealed lead acid, maintenance-free, rechargeable battery.
- category
- environment
- voltage
- spec delta
- voltage: 120/277V → 120V/12DCV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →