KL-FGS-FLUOR
Cleanrooms, controlled environment and containment spaces are used in a number of applications for industries such as medical, food processing, electronics, pharmaceuticals, biology and aerospace. Standards for cleanliness in these rooms have been published previously in FS209E and ISO 14644-1. These standards apply to air-flow, surfaces and other processes integral to maintaining very low particulates. Light fixtures in cleanrooms must be sealed to prevent the accumulation of particulates inside the housing that may then lead to the contamination of the facilities sealed air-flow. Cleanrooms frequently require different levels of light based on the types of activities taking place. The KURTZON™ KL-FGS-FLOUR is a 1×4, 2×2 or 2×4 fluorescent luminaires designed to meet the rigorous standards of the clean room environment. The housing is a one piece, hole free, robotically seam welded housing has flattened knockouts for a superior seal that can be installed recessed or surface mount. The door frame is a one-piece door frame with welded corners overlaps the fixture allowing the NSF approved microcellular gasket to seal to the mounting surface. The troffer is IP66 rated for dust and water ingress, suitable for 1700 PSI high pressure hose downs and UL listed per UL_1598 for wet locations. It is also Chicago Plenum Rated.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Replace up to 9 standard panels with just 1! These fixtures feature selectable lumen and color temperature options, reducing stocking complexity and providing additional flexibility for contractors.
- category
- subcategory
- environment
- voltage
- lumens
- spec →
<h5><strong>Meet BEAM V2 (7178). Model #'s 7176 and 7177 have officially merged to create the now-current 7178.</strong></h5>Key notes: This product is ADA compliant in its standard configuration. Unlike the 7176/7177, the 7178 mounts to a 2x4 single gang j-box, due to its redesigned slim housing. If needing to mount to a 4x4 j-box, refer to spec sheet "Accessories" section for a specifiable cover plate. The BEAM V2 is a wet location rated product featuring a modern, architectural aesthetic. With four sizes available, this product is ideal for decorative exterior facades, breezeways, commercial interiors, bathrooms, healthcare and even stairwells (battery options available). Constructed of heavy duty extruded aluminum with a stout, uniformly illuminated frosted acrylic diffuser. Contact factory for 7176/7177 replacement parts or special order requests.
- category
- subcategory
- environment
- voltage
- lumens
- spec →
MaxLite's new Value Troffer Retrofit Kit - TRKE Series offers an economical solution to upgrade existing fixtures to LED technology. The kit can be easily ins...
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- spec →
Soft diffused direct illumination in a sleek modern minimalist style. Thermally efficient extruded aluminum single piece housing Powder coat finishes available in white and black 0-10v dimming is standard Dim to 1% of output current is standard Class 2 output for luminaire 120-277 for power enclosures Approved for dry and damp locations 90 CRI (R9 50 min) available Plenum rated cable is standard Plenum rated enclosures available
- category
- subcategory
- environment
- voltage
- lumens
- spec →
Both Power and CCT adjustable, 120-277VAC • Easy install by Recessed or surface mounts. • Built-in junction box Fits standard T-grid ceilings • Optical lenses over LED chip, pc cover never yellow over time. • 50,000hours Life time.
- category
- subcategory
- environment
- voltage
- spec delta
- lumens: 1150 → 9360
- spec →
Suspended version - modern architectural luminaire, ultra-thin transparent optics panel, enveloped in a signature “I-beam” shaped frame.
- category
- subcategory
- environment
- voltage
- spec delta
- lumens: 1150 → 4027
- spec →
The Class D3X architectural recessed troffer offers subtle, clean geometry in a fully luminous door-frame design. This contemporary, high quality luminaire provides superior visual comfort and is dedicated to the latest solid-state lighting and driver technology for optimal performance and energy efficiency. Available in 2x2, 2x4, and 1x4 sizes, the D3X is an excellent choice for commercial office spaces, schools, hospitals or retail merchandising areas.
- category
- subcategory
- environment
- mounting
- voltage
- spec delta
- lumens: 1150 → 4000
- spec →
The Fail-Safe MRI-ATR is an architectural troffer specifically designed for MRI rooms in healthcare facilities and medical spaces because of its non-ferrous construction. Available in 1'x4', 2'x2', and 2'x4' sizes, the MRI-ATR has a slim frame design allowing a fully luminous aesthetic with only the illuminated lens being visible. The fixture also has multi-channel MRI filters and a remote driver.
- category
- subcategory
- environment
- mounting
- voltage
- spec delta
- lumens: 1150 → 7000
- spec →
The HALO Night Light Canless Downlight comes in sizes 4" and 6" and features two modes: downlight mode for general area illumination and night light mode for a gentle glow illuminating the acrylic trim. Simply toggle your light switch to change modes. Choose your color temperature directly on the fixture for the downlight mode. With the flick of a switch, you can choose between 5 color temperatures ranging from warm (2700K) to daylight (5000K) or choose the warm dimming option to mimic candlelight for mood setting in any space. This canless direct mount downlight does not require a housing for installation. The slim design fits in 2x4 construction or ultra-shallow plenum spaces. The smooth lens and even glow make this the perfect solution in a multitude of residential applications including children’s rooms, bathrooms, hallways, or any space you may need a night light.
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- +1 more
- voltage: UNV → 120V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →