IC22LED-600LM-HOUSING
Juno® IC22LED 600LM, dedicated 6-inch LED new construction housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.
- category
- environment
- voltage
- CCT
- CRI
- wattage
- +2 more
- spec →
USE OF PRODUCTThe 3" PRIME Wall Wash is a small aperture fixture with shallow height that may be used in residential and commercial applications. Die cast trims with an assortment of color temperatures, optics and dimmable drivers. May be used in plaster, wood and marble ceilings.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 8.3W → 32W
- spec →
PFX-3156 Gooseneck Light is a unique decorative lighting fixture that allows you to update the look of your building. Elegant and curved goose neck arm, simple and low-key appearance design, can be well applied to a variety of architectural styles. Quick and easy Installation. The 28W Fixtures offers Selectable CCTs, can be adjusted to be 2700K/3000K/ 4000K/5000K/6500K. Universal Voltage 120-277VAC. Integrated Photocell included.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 600 → 3080
- wattage: 8.3W → 28W
- spec →
The LITELUME™ LED Downlight Disk (LL-DLD) luminaire can be used in a wide variety of indoor applications ( damp rated ) for new construction or retrofit. Featuring 5 CCT’s to choose from, and comes with and without PIR motion sensor.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 600 → 1819
- wattage: 8.3W → 19W
- spec →
Interior architectural field selectable cove lighting
- category
- environment
- voltage
- CCT
- CRI
- dimming
- spec →
With the advancement in our industry-leading AccuLED Optics™ system, the next generation Navion LED area, site and roadway luminaire offers an expanded selection of optical distributions to provide the configurability and superior performance required for outdoor applications. The Navion luminaire provides uniform, glare-free, energy-efficient light for commercial, industrial and municipal parking lots as well as roadway applications. UL/cUL listed for wet locations, IP66 enclosure rating available.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- wattage: 8.3W → 440W
- spec →
Lanterra 1003 Sign is a small 2.5” line voltage sign lighting luminaire that attaches to a wall mounted straight arm and is available in aimable single and dual head configurations along with 90 degree elbow options to meet any desired rotation and vertical adjustment required for a project. Multiple standard stem length arms up to 36” are available. The luminaire also comes with various mounting, beam optics. Various lenses, louvers and color or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- spec →
Designed for use in architectural and commercial applications with limited plenum height, the patented WaveStream optical technology provides uniform, glare-free illumination along with high efficacy, providing the perfect solution for high ceiling applications.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 600 → 9000
- wattage: 8.3W → 99W
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. This high-performance security light features two high-brightness LED heads and a built-in passive infrared motion sensor.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 600 → 5000
- wattage: 8.3W → 52W
- spec →
Up to 85% optical efficiency with a wide variety of shielding options including slots, louvers, and perforation, Williams AI3 provides uniform indirect illumination with plenty of options to enhance the visual appeal of the fixture.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 600 → 10904
- wattage: 8.3W → 86.9W
- spec →
The LAC Series crowned four-rung traditional acorn luminaire features a corrosion-resistant cast aluminum fitter with 11 decorative design options, combined with a high-impact clear acrylic globe with two available sizes. It utilizes a three-dimensional LED Power Array™, offering efficient IES distribution patterns (Types II, III, IV, and V). Available in neutral, cool, and warm white, with lumen maintenance of L94 at 60,000 hours, this fixture supports dimming and is UL® listed for wet locations. Optional features include mini-button photocells, motion sensors, and two lens configurations for diffused lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- wattage: 8.3W → 2W
- spec →
Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- dimming
- housing
- spec →
Low Voltage, Recessed DownlightThe MINUS 1 showcases first-of-its- kind hardware and software, developed by Apure to enable complete control of the LED’s temperature and the flow of power within the circuit, thereby enhancing the lifetime and performance of the luminaire. The high-tech design features a perfectly round 10 mm (3/8′′) aperture that distributes virutally glare-free light in either a 20 or 40 degree beam spread and includes various dimming protocols, each fully compatible with all major architectural lighting control systems.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- spec →
Integral Driver Monopoint Luminaire
- category
- environment
- voltage
- CCT
- wattage
- spec →
60 Linear Surface is a continuous flush lens surface mounted linear luminaire with ultra clean design for absolute minimal appearance. Easily installed internal LED tray assembly with integral driver.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- wattage: 8.3W → 15W
- spec →
4" Deep regressed cone reflectors optimize visual cut-off. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: BB: Black Reflector / Black Flange HZMPW: Haze Reflector / Bright White Flange MPW: Bright White Reflector / Bright White Flange WW: Warm White Reflector / Warm White Flange Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R413: New Construction Frame-In with Collar
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- wattage: 8.3W → 23W
- spec →
Dimmable ELV, Triac or 0-10V depending on driver used. Same LED light engine for 850 and 1100 lumens (see housings) cUL Listed for Direct Contact with insulation Works with compatible ceilings up to 1¼″ Height allows for use in ceilings with under 5" depth. Ceiling thickness can be reduced from fixture depth. 38° Standard beam with optional 28° and 60° Wet Location Rated for Indoor and Outdoor Use JA8-2016-E, cUL, and Energy Star Qualified Life Span 50,000 Hours L70 U.S. Pat. 10,125,959
- category
- environment
- voltage
- CCT
- CRI
- wattage
- +1 more
- spec →
“GEN 3” - LED DUAL SELECTABLE WALL PACK BUY AMERICA OPTION The BELMONT III GEN3 Series 9110G3 is traditional wall pack constructed out of a die-cast aluminum housing and tempered borosilicate glass lens. The unit comes standard with 0-10V dimming capability and three power ranges with a dual selectable platform, wattage and color temperature, on each for jobsite versatility. Options include a pre-installed photocell and Buy America Compliancy. IP65 rated.
- category
- environment
- voltage
- lumens
- dimming
- spec delta
- cct: 2700K → 3000/4000/5000K
- wattage: 8.3W → 115W
- spec →
The iO Lighting MiniO Flex-Optic maintains the minimalistic form factor of the MiniO family while cleverly illuminating curvatures in architectural details. Four optimized optical distributions across four color temperatures provide enhanced, essential layers of light. The MiniO family reinforces creative design freedom with minimalistic flexible forms of light and remote drivers. Ideal for indoor or outdoor organic architecture where flexible top-bend architecture is necessary to illuminate small spaces. Utilize as a wallgrazer in a linear run with one of the four co-molded optical-grade silicone options, placing light on the desired details. This MiniO minimalistic, flexible form factor is available in 0-10V dimming via remote driver and creates runs up to 16.4' on a single power supply.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- wattage: 8.3W → 100W
- spec →
Includes 35.1 watt, 1237 delivered lumens, 2700K 90 CRI LED module. Dimmable with most LED compatible ELV, TRIAC and 0-10V dimmers. ADA compliant. Mounts vertical or horizontal. 120V-277V.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: UNV → 120V
- lumens: 600 → 1237
- wattage: 8.3W → 35.1W
- spec →
The Bailey large round ceiling series with its wide metal trim band and white acrylic diffuser, is available in two finishes and two sizes. Featuring five color adjustable CCT and options for battery back-up, motion sensor or battery back-up with motion sensor.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- lumens: 600 → 2700
- wattage: 8.3W → 45W
- spec →
The HTG-3PR-LP LoPro Flush Perimeter fixture is available in versatile mounting options, including Trimless, Trim Flange, and T-Grid configurations. Designed for low-plenum installations, it features a low-profile depth of 2.85”–3.05” (integral driver). The fixture offers advanced optics with options for glare control, diffused (Lambertian), or room fill optics, ensuring optimal lighting performance. With specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft, it boasts a minimalistic 3” aperture and can be configured in individual lengths or seamless continuous runs up to 300 feet without lens breaks. Accessibility for drivers, wiring, and serviceability is streamlined through a patented toolless “Push to Eject” system, while the toolless latch system and Quick-Click 5-Wire setup enable simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +2 more
- voltage: UNV → 120-277V, 347V
- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- voltage
- dimming
- spec delta
- lumens: 600 → 120000
- cct: 2700K → 4000K
- wattage: 8.3W → 850W
- spec →
LX1.8 architectural linear luminaire housing from 1.8” wide aluminum extruded profile, available in 2, 4, and 8-Ft length with White, Black finish; integral driver, frosted polycarbonate lens.
- category
- environment
- voltage
- dimming
- spec delta
- cct: 2700K → 3000K
- wattage: 8.3W → 80W
- spec →
The UV-C Control Panel is an integral part of the Cooper Lighting Solutions' UV-C System. Using required clearance pushbuttons and magnetic sensors, the UL8802 Safety Rated control system ensures that the space to be sanitized is vacant and if someone enters the space, assurance that the system will turn off. The control panel accepts up to 24 safety clearance pushbutton inputs and can be wired to one User Safety Panel which is used to turn the system on and off.
- category
- environment
- voltage
- spec →
The Iridium i2 WaveStream luminaire merges classic design with cutting edge technology to provide quality illumination and superior optical control. Using the WaveStream LED direct/indirect light engine, its wide batwing distribution makes it an excellent choice for lower ceiling applications and areas where ceiling uniformity is important. Available in 4’ and 8’ sections with a multitude of options, the Iridium i2 WaveStream is well suited for commercial office spaces, schools, libraries and other architectural interiors. The WaveStream LED direct/indirect light engine is also available in several other popular Corelite series including the Element, Loft, Minigator and Vertechs.
- category
- environment
- voltage
- dimming
- spec delta
- lumens: 600 → 4912
- cct: 2700K → 3500K
- wattage: 8.3W → 87.7W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Juno
Full directory →60 rep agencies carry the Acuity Brands line across 51 states. Pick your state.
Alabama AL1 agency
- AMA LightingAcuity Brands
Birmingham · Mobile
Alaska AK1 agency
- Alaska Architectural LightingAcuity Brands
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
- Long Sales AgencyAcuity Brands
Statewide
California CA6 agencies
- sixteen5hundredAcuity Brands
San Francisco
- SDLAAcuity Brands
San Diego
- C.J.S. LightingAcuity Brands
Sacramento
- Mar Vista SalesAcuity Brands
Ventura
- C.B.C. LightingAcuity Brands
Fresno
- All 6 in the CA directory →
Colorado CO1 agency
- The Lighting AgencyAcuity Brands
Statewide
Connecticut CT1 agency
- Lighting AffiliatesAcuity Brands
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
- Federated LightingAcuity Brands
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Envision Lighting SystemsAcuity Brands
Fort Myers · Tampa
- AMA LightingAcuity Brands
Panhandle
- LandrethAcuity Brands
Orlando
- Arch. Sales & IlluminationAcuity Brands
Jacksonville
Georgia GA1 agency
- Lighting Associates, Inc.Acuity Brands
Atlanta · Savannah
Hawaii HI1 agency
- Hawaii Lighting AssociatesAcuity Brands
Statewide
Idaho ID1 agency
- DMA - IdahoAcuity Brands
Boise
Illinois IL1 agency
- KSA Lighting & ControlsAcuity Brands
Central · Chicago
Indiana IN1 agency
- Light SourceAcuity Brands
Statewide
Iowa IA1 agency
- CSLAAcuity Brands
Statewide
Kansas KS1 agency
- Premier Lighting & ControlsAcuity Brands
Statewide
Kentucky KY1 agency
- LHI Lighting SalesAcuity Brands
Louisville
Louisiana LA2 agencies
- Lighting & Electrical Assoc.Acuity Brands
Baton Rouge · New Orleans
- Architectural Lighting AllianceAcuity Brands
Shreveport
Maine ME1 agency
- Visible LightAcuity Brands
Statewide
Maryland MD1 agency
- Federated LightingAcuity Brands
Statewide
Massachusetts MA2 agencies
- Boston Light SourceAcuity Brands
Boston
- Lighting AffiliatesAcuity Brands
Springfield
Michigan MI2 agencies
- Gasser Bush Assoc.Acuity Brands
Detroit
- West Michigan LightingAcuity Brands
Grand Rapids
Minnesota MN1 agency
- Davis & AssociatesAcuity Brands
Statewide
Mississippi MS1 agency
- Hartwell CookAcuity Brands
Statewide
Missouri MO2 agencies
- Premier Lighting & ControlsAcuity Brands
Kansas City
- St. Louis Lighting GroupAcuity Brands
St. Louis
Montana MT1 agency
- The Lighting AgencyAcuity Brands
Statewide
Nebraska NE1 agency
- CSLAAcuity Brands
Omaha
Nevada NV1 agency
- Nevada LightingAcuity Brands
Las Vegas · Reno
New Hampshire NH1 agency
- Visible LightAcuity Brands
Statewide
New Jersey NJ1 agency
- Illuminations Inc.Acuity Brands
Northern NJ · Southern NJ
New Mexico NM1 agency
- RKL Sales CorporationAcuity Brands
Statewide
New York NY2 agencies
- Illuminations Inc.Acuity Brands
NY City metro
- Point Source GroupAcuity Brands
Upstate
North Carolina NC3 agencies
- Crown Lighting GroupAcuity Brands
Charlotte
- K.B. StephensAcuity Brands
Raleigh
- R.L. Vanstory CompanyAcuity Brands
Greensboro
North Dakota ND1 agency
- Davis & AssociatesAcuity Brands
Statewide
Ohio OH3 agencies
- Gasser Bush Assoc.Acuity Brands
Toledo
- DLS GroupAcuity Brands
Cleveland · Columbus
- King LightingAcuity Brands
Cincinnati
Oklahoma OK1 agency
- Triple C Lighting & ControlsAcuity Brands
Statewide
Oregon OR1 agency
- Harry L. StearnsAcuity Brands
Statewide
Pennsylvania PA2 agencies
- Illuminations Inc.Acuity Brands
Philadelphia
- LaFace & McGovernAcuity Brands
Pittsburgh
Rhode Island RI1 agency
- Boston Light SourceAcuity Brands
Statewide
South Carolina SC1 agency
- Creative Lighting SolutionsAcuity Brands
Statewide
South Dakota SD1 agency
- Davis & AssociatesAcuity Brands
Statewide
Tennessee TN3 agencies
- DesignlightAcuity Brands
Nashville
- Clear Advantage LightingAcuity Brands
Memphis
- Lighting TrendsAcuity Brands
Chattanooga · Knoxville
Texas TX5 agencies
- Spectrum LightingAcuity Brands
Austin
- Spectrum LightingAcuity Brands
San Antonio
- RKL Sales CorporationAcuity Brands
El Paso
- LESCO Lighting + ControlsAcuity Brands
Houston
- Architectural Lighting AllianceAcuity Brands
Dallas
Utah UT1 agency
- JRCAcuity Brands
Statewide
Vermont VT1 agency
- Visible LightAcuity Brands
Statewide
Virginia VA2 agencies
- Federated Lighting VAAcuity Brands
Richmond · Roanoke
- Resource Lighting & ControlsAcuity Brands
Norfolk
Washington WA2 agencies
- The Lighting GroupAcuity Brands
Seattle
- J.C. Wright Lighting SalesAcuity Brands
Spokane
West Virginia WV1 agency
- LaFace & McGovernAcuity Brands
Statewide
Wisconsin WI1 agency
- Enterprise Lighting & ControlAcuity Brands
Statewide
Wyoming WY1 agency
- Lumen FXAcuity Brands
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.