EVE U R W E -2C
EVE exit sign configured for 2-circuit operation (separate AC and battery feeds). For use with AC models.
Cross-References
30 equivalents across 11 brands
Compare top 3 →- spec →
Thermoplastic LED exit sign, stencil face, white housing, red letters, dual voltage 120/277V, Ni-Cad battery backup. Field-convertible single to double face; 4-products-in-1 (red/green color selection, AC/battery-backup switch, universal mounting).
- category
- subcategory
- voltage
- duration
The JAS Series contemporary center lens design delivers a soft natural glow with even illumination and minimized glare, making it an attractive general-purpose ambient lighting solution. The optional factory-installed Sage Relay option ensures full emergency-code compliance at the lowest possible cost.
- category
- environment
- voltage
- spec →
The EXP Series is a slim-profile thermoplastic LED exit sign that offers modern design, including a standard flat faceplate, long-lasting and energy-efficient LEDs, and uniform illumination in an economical package.
- category
- subcategory
- voltage
- spec delta
- voltage: 120/277VAC → UNV
ILLUMINATION • Two, 6V, 1.0W adjustable square LED lamp heads in engineering grade, high-impact resistant, thermoplastic. ELECTRICAL • Dual 120V/277V. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • LVD (low voltage disconnect) prevents battery from deep discharge. • 6V sealed lead acid,
- category
- subcategory
- voltage
- spec →
*** While Supplies Last, replacement item: NX-603D-LED *** For emergency applications, Nora Lighting offers its revolutionary, long life, low maintenance LED exit sign with battery backup. In the event of power loss, the LED light sources will remain illuminated at their full light level for 90 minutes. BODY 11-3/4" Width x 7-1/4" Height x 1-3/4" Depth Injection-molded thermoplastic housing FACE Single or dual configuration. Lettered face is provided if dual face is preferred 6" high text with color diffusion Replaceable knockout directional chevrons MOUNTING Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL 120V/277V input Total power usage: 3.3W LED light source NiCad (nickel-cadmium) replaceable battery 90 minute emergency operation Internal solid state charging circuit TESTING High-charge / ready operation indicator light Test button Automatic reset Circuitry Protection Short circuit and brown-out protection Disconnect for deep discharge LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL 924 NFPA NEC State & Municipal Suitable for damp locations Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEG-60: Wet Location Enclosure
- category
- subcategory
- voltage
Emergency lighting solution to keep exit routes safe and illuminated Emergency Light with two 1W LED glare-free light heads 120/277V 90 minutes of emergency operation Sturdy thermoplastic housing Suitable for wall and ceiling mount Test switch and battery charging indicator cUL listed for damp locations
- category
- subcategory
- voltage
- spec →
The EXQM Series from the Holophane® Magellan family is an attractive, thermoplastic exit sign that delivers next level performance for a wide variety of indoor applications while raising the bar for
- category
- subcategory
- voltage
- spec delta
- voltage: 120/277VAC → UNV
- spec →
HALOGEN-LED EMERGENCY THERMOPLASTIC WET LOCATION BUY AMERICA OPTION Black or white finish. 7.2 watt halogen lamps standard. Options include cold weather, 3.6 watt LED lamps, 5 watt LED lamps, CEC and Assembled in the USA.
- category
- subcategory
- voltage
- spec →
The LPXW series provides a UL924 compliant solution for outdoor exit requirements. The fixture is wet location listed with a temperature rating of (- 20°C to 50°C ). The UV stabilized polycarbonate housing is available in white, grey or black with red or green Exit letters. Labor savings self-diagnostics that perform required monthly and yearly testing are standard for the self-powered exits.
- category
- voltage
- spec →
Thermoplastic LED exit sign, single face, white housing, green letters, dual voltage, Ni-Cad battery.
- category
- subcategory
- voltage
- duration
The Surface Mount Edge Lit Exit Sign is field adjustable for wall or ceiling mount. The edge-lit panel is constructed of high-grade acrylic with custom graphics and directional arrows to point towards the exit direction. Ultra high output LEDs produce brilliant graphic illumination well above code minimums.
- category
- environment
- voltage
- spec →
The EEC Series is a slim-profile thermoplastic LED exit sign/emergency light combo that offers modern design, including a standard at faceplate,long-lasting and energy-efficient LEDs, an innovative LED lamp head and uniform illumination in an economical package.
- category
- subcategory
- voltage
- spec delta
- voltage: 120/277VAC → UNV
ILLUMINATION • Smooth thermoplastic or chrome plated metalized reflector with lens for optimal light distribution. • Available with MR-16 halogen or wedge base incandescent lamps. ELECTRICAL • Powered from low voltage power source with low voltage wiring (not provided). MOUNTING • Universal mounting base plate included with mounting hardware. •
- category
- subcategory
- spec →
Compact, low profile LED exit signs are as brilliant and visible as standard incandescent signs, yet use a fraction of the power. LED light sources require no maintenance for 25 years–saving greatly on maintenance and upkeep costs. Nora Lighting’s LED exits are ideal for commercial and industrial standard non-emergency applications where low maintenance and operating costs are a must. NX-503-LED/G - Green "Exit" Letters, White Housing NX-503-LED/BG - Green "Exit" Letters, Black Housing NX-503-LED/R - Red "Exit" Letters, White Housing NX-503-LED/BR - Red "Exit" Letters, Black Housing BODY 12-1/8" Width x 8-5/8" Height x 1-3/4" Depth Injection-molded thermoplastic housing FACE Single or double face available. Lettered face provided if dual face is preferred. 6" high text with color diffusion Replaceable knockout directional chevrons MOUNTING Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL 120V/277V Input Total power usage: 2.7 Watts LED light source Isolated surge/short circuit protection Disconnect for deep discharge LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL 924 Suitable for damp location NFPA NEC State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXL-R: Red replacement lens NEG-60: Wet Location Enclosure
- category
- subcategory
- voltage
Combination Exit Sign with two Adjustable 2W LED Light Heads. Sealed maintenance free battery backup. Sturdy thermoplastic housing. Single or double face with 6" letters. cUL or ETL Listed.
- category
- subcategory
- spec →
The QMH Series from the Holophane® Magellan family delivers next level performance for a wide variety of commercial indoor applications, such as: office spaces, hospitality, retail, multi-family and
- category
- subcategory
- voltage
- spec delta
- voltage: 120/277VAC → UNV
- spec →
HALOGEN-LED EMERGENCY THERMOPLASTIC BUY AMERICA OPTION Black or white finish. 7 watt halogen lamps standard. Options include 3.6 watt LED lamps, 5 watt LED lamps and Assembled in the USA.
- category
- subcategory
- voltage
- spec →
The All-Pro APXH7 series is a polycarbonate LED exit with remote capacity. The series is compatible with the APWR1 and APWR2, 3.6 volt LED remotes. It is available with red or green letters. The APXH7R2 and APXH7G4 will power two LED remote heads while the APXH7R4 and APXH7G4 will power four remote heads. These exits are universal mount (ceiling, wall or end) and are field configurable for single or double face.
- category
- voltage
- spec →
LQM with Self-Diagnostic (SD): automatic 30-day/90-minute annual testing.
- category
- subcategory
- voltage
- duration
- spec delta
- voltage: 120/277VAC → MVOLT 120-277V
Compact Thermoplastic Exit Sign — Rowan · Series ROW
- category
- environment
- voltage
- spec delta
LOW LEVELALL LED THERMOPLASTIC EXIT& EMERGENCY COMBO
- category
- subcategory
- spec →
Dual 120V/277V LED Exit sign with the second circuit allowing the sign to be automatically switched to an external emergency power source such as a generator. Ideal for hospitals, banks, high rises, and any application where a self-generated power source is used in the event of an emergency. NX-504-LED/G - Green "Exit" Letters, White Housing NX-504-LED/BG - Green "Exit" Letters, Black Housing NX-504-LED/R - Red "Exit" Letters, White Housing NX-504-LED/BR - Red "Exit" Letters, Black Housing BODY 12-1/8" Width x 8-5/8" Height x 1-3/4" Depth Injection-molded thermoplastic housing FACE Single or Dual configuration. Lettered face provided if dual face is preferred. 6" high text with color diffusion Replaceable knockout directional chevrons MOUNTING Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL 120V/277V Input Total power usage: 2 Watts LED light source Short Circuit/ Surge protection Second circuit provided for external emergency power source. LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL 924 NFPA NEC State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXL-R: Red replacement lens NEG-60: Wet Location Enclosure
- category
- subcategory
- voltage
Single or Double faced. 120V/277V with battery backup and hanger bars. For wall or ceiling mount. UL or ETL listed. Removable chevrons (arrows) included for jobsite customization.
- category
- voltage
- spec →
THERMOPLASTIC RECESSED Rectangular or oval. Black or white finish. 1 watt per head.
- category
- subcategory
- voltage
- spec delta
- voltage: 120/277VAC → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →