95014
Halco # 95014 Evade Emergency Wallpack EV-WPK-EM quality emergency lighting solution in a low profile architectural design. This wallpack is ideal for egress and safety lighting on building exteriors and over doorways. UL924 Code Life Safety
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The LED Emergency Outdoor Full Cutoff combines 90-minute emergency lighting with a low-profile, architectural design. The EOF is designed for outdoor use, with an optional cold-weather kit for added reliability in northern climates. The EOF comes standard with a photocell and wall switch, allowing users added energy efficiency and the ability to control the light from a switch, with an optional motion sensor adding even more energy efficiency. A non-emergency unit is available for locations not requiring battery-backup, providing a uniform look for all fixtures.
- category
- environment
- mounting
- voltage
- CCT
- wattage
- spec →
LED Chicago Approved Recessed Edgelit Aluminum Exit/Stairs Sign Ultra-bright, energy efficient, long-lasting white LEDs provide uniform illumination. UV stabilized, silk screened acrylic panels provide consistent, uniform illumination Premium-grade, extruded aluminum housing Extruded aluminum trim assembly is easily detachable providing accessibility for service or maintenance. Also available in optional white finish Single or double face configurations
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 15W → 250W
- spec →
The LPXW series provides a UL924 compliant solution for outdoor exit requirements. The fixture is wet location listed with a temperature rating of (- 20°C to 50°C ). The UV stabilized polycarbonate housing is available in white, grey or black with red or green Exit letters. Labor savings self-diagnostics that perform required monthly and yearly testing are standard for the self-powered exits.
- category
- environment
- voltage
- spec delta
- wattage: 15W → 3.4W
- spec →
The LX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Top, end or back
- category
- environment
- voltage
- spec delta
- wattage: 15W → 2W
- spec →
Nora's new 20 gauge steel body exit units are suitable for rugged applications and New York City approved. Exit sign utilizing Light Emitting Diode (LED) modules as the primary light source for economy operation NX-550 includes a backup NiCad battery for 90 minutes operation under emergency applications where primary power source has been interrupted or terminated. NX-550-LED/R - Red Letters with White Housing NX-505-LED/RB - Red Letters with Black Housing BODY 14-5/8" Width X 10-1/2" Height X 2-1/4" Depth 20 gauge Steel construction Black & White finish FACE Single or double face 8" high text with 1" stroke Snap-out chevron New York approved MOUNTING Universal - Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL Voltage Dual 120V / 277V input (0.038A / 0.017A) Automatic solid state switching and charging Light Source Long life LED sources Battery NiCad (nickel-cadmium) 3.7 Watts @ 120V replaceable battery included 90 minute emergency operation Internal solid state charging circuit Testing High-charge/ready operation indicator light Test button Circuitry Protection Short circuit protection LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL Listed NFPA-101 Meets City of New York emergency code requirements (NY Approved) Suitable for damp location
- category
- environment
- voltage
- spec delta
- wattage: 15W → 4.8W
- spec →
The ARC product is a vandal resistant design with a built-in photosensor, field selectable CCT option and an operating temperature range of -30C to 50C, making it suitable for outdoor environments.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 3000K
- spec →
The DLTLC from Holophane is a wet location low-profile combination of exit and emergency light. Available with red or green letters. It is ideal to safely illuminate the path of egress above-the-door
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 15W → 5W
IP65 Waterproof - Featuring a fully sealed lampshade, this emergency light is built to withstand outdoor rain and wind, as well as indoor humidity. Its robust construction ensures reliable operation in diverse environments. Rotatable LED Light Heads - The LED light heads rotate 360° horizontally and 90° vertically for precise directional control. Combined with a 120° wide beam angle, they effectively illuminate large areas to meet diverse emergency lighting needs.
- category
- environment
- voltage
- spec →
3" x 6" direct/indirect LED luminaire The BC8781 direct/indirect suspended linear luminaire features three light sources within a unique 3” high by 6” wide trapezoidal form factor. Each leg of the isosceles trapezoid contains a 3” wide diffuse light source. A 1-1/4” wide source located on the lower base directs light downward with options of a regressed acrylic diffuser or flat blade louver optic.
- category
- environment
- voltage
- spec delta
- cct: 5000K → 2700/3000/3500/4000K
- spec →
Soft Green Exit Signs and Emergency Lights The GLE-S Green Exit Series is specifically designed to provide plant-safe Soft Green egress lighting for horticultural applications. The plant-safe, green light provides a safe means of egress while not adversely affecting plant growth during dark cycles. The GLE-S is the brightest, most visible sign in the industry in both normal and smoke-filled environments. The GLE-S is a UL code-compliant exit sign which emits a plant-safe, Soft Green light perfect for use in grow rooms. Commercial grow rooms must meet code compliance for proper exit signage while maintaining the integrity of the dark cycle.
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Halco Lighting
Full directory →15 rep agencies carry the Halco Lighting line across 30 states. Pick your state.
Alabama AL1 agency
Birmingham · Mobile
Alaska AK1 agency
Statewide
Arizona AZ1 agency
Statewide
California CA1 agency
Sacramento · San Francisco
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
Statewide
Florida FL1 agency
Panhandle
Georgia GA1 agency
Atlanta · Savannah
Idaho ID1 agency
Boise
Indiana IN1 agency
Statewide
+20 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.