RSQ4 All-Purpose Square LED Module
The RSQ4 is an integrated LED module / trim with a square shallow lens suitable for new construction, remodel and retrofit installation. Certified for use with Halo and compatible 4” housings and can be used with housings in direct contact with insulation. Integral gasket provides airtight compliance in non-airtight housings, provides code compliance and additional energy savings. Use for general area lighting in low to medium height ceilings where energy savings and long life are desired.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Atlas Low Wattage Area Light provides an ideal, lower-cost solution for lower mounting heights and where other area lighting fixtures are not needed. Made of durable die-cast aluminum, this high-performance fixture produces a smooth and uniform light pattern on the ground.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
A series of single and twin LED Area/Roadway luminaires with asymmetrical or asymmetrical wide spread light distribution. This family of luminaires is designed specifically to illuminate streets, squares, access roads and pedestrian zones with maximum glare control and minimal spill light. DarkSky Approved (2700K and 3000K only).
- category
- subcategory
- environment
- CCT
- spec →
Designed to deliver subtle area lighting with minimal glare for hallways, offices, and classrooms Flush frame level option with frosted acrylic lens creates the appearance of an unobtrusive and simple line of light – a perfect complement to unique design applications
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- spec →
ESX1 This product has been discontinued, please see the suggested products below or contact your local sales representative.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
CanLume Round 18 The CLR18 Architectural Round Canopy is available in Type II, III, IV or V distributions designed to replace HID lighting systems up to 400w MH or HPS. Typical area lighting applications include retail centers, industrial parks, schools and universities, public transport and airports, office buildings and medical facilities. Mounting heights of 12 to 30 feet can be used based on light level and uniformity requirements. BAA compliant. UL listed for wet location. IP66 rated.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
Pathscape 800 Commercial die-cast brass area light hat. Extra large and shallow design perfect for any pathway, driveway, flower bed and more. Constructed to evenly diffuse light spread and maximize brightness. Frosted polycarbonate lens silicone in to the hat and commercial grade collar. Designed for easy inventory, and mix-and-match design flexibility, our area lights are ordered in two components. Mounting / Installation Lead Wire Length: Dual 16AWG wire leads (option to daisy chain), first 25’, second 18” Mounting: Slotted 8.5” large ground stake (standard) Material Housing: Solid cast brass (hat and stem) Lens: Polycarbonate frosted lens with rubber gaskets both clear and frosted provided Socket: G4 Bi-Pin, Spring-loaded ceramic, with dual contacts and lamp clips Adjustable Beam: Stem incorporates adjustable collar for light spread and glare control
- category
- subcategory
- environment
- CCT
Marbella Wall Mount The transitional styled lantern wall mount MRB-WM Series by Sun Valley Lighting features a heavy-duty cast aluminum housing with decorative accents. Utilizing LED technology, this wall-mounted luminaire provides efficient illumination for traditional streetscapes and building exteriors. It offers a range of distribution patterns to suit various lighting needs. BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- spec →
Galaxy 700 Stylized round form area light with triple strut yoke mount. GLX-700 is available in 8 different configurations. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance. Heavy gauge cast aluminum body. Formed aluminum top and door frame. Stainless steel hardware. Polyester powdercoat finish. BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- cct: 2700/3000/3500/4000/5000K → 6500K
- spec →
The traditionally styled 400 Series base offers durable, corrosion-resistant cast aluminum construction with a 12" diameter bolt circle. Its smooth, stepped bottom section and decorative tapered fluted design make it both functional and visually appealing. Standing 33" high, the base is designed to pair with a variety of decorative outdoor lighting shafts, perfect for enhancing streetscapes or landscapes. BABA compliant.
- category
- subcategory
- environment
- CCT
- spec delta
- voltage: 120V → 347480
- spec →
The main quality of this modern classic is providing downward, wide-area lighting that is both calming and practical. The luminaire includes a head that not only creates unique highlights in flower beds and neatly groomed lawns but can easily light up walkways and winding paths.
- category
- subcategory
- environment
- voltage
- spec delta
- cct: 2700/3000/3500/4000/5000K → 2200K
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps HALO
Full directory →43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
- Malmstrom White Co.Cooper (Eaton)
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco · Ventura
Los Angeles · San Diego
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.