ARFL Series Slim Wall & Flood Light
The ARFL Slim Wall & Flood Light Series offers versatile, energy-efficient LED lighting with three sizes delivering 1,500 to 9,600 lumens. Mount as a flood or wall luminaire with included decorative wall mounting plate for select options and multiple mounting methods using a ½” threaded tool-less adjustable knuckle or mounting bracket. Easily customize lighting with 5 selectable color temperatures (2700K-3000K, 3500K-4000K-5000K or 3000K-3500K-4000K-5000K-6500K) via remote control or a switch located on fixture. The integrated photocell allows for Dusk to Dawn operation, which can be toggled for manual use. Constructed from rugged die-cast aluminum with a textured bronze finish, it boasts a 50,000-hour lifespan and is IP65 rated for dust and water resistance. Choose between 2 or 5-year warranty options for reliable, long-lasting outdoor illumination.
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
• Made of rugged aluminum alloy with a glass lens • Projects light in both directions, illuminating the wall above and below • Durable and suitable for wet locations • Features a matte black finish and modern design • Includes a pre-installed dusk-to-dawn light photocell sensor for energy-saving operation by turning off lights during daytime • Operating Temperature : -4 deg.F to +104 deg.F / -20 deg.C to +40 deg.C
- category
- environment
- voltage
- CCT
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. This high-performance security light features two high-brightness LED heads and a built-in passive infrared motion sensor.
- category
- environment
- voltage
- CCT
- housing
- spec →
Wall Pack Field Selectable Output & CCT The AMWM-CSR Full Cutoff Wall Pack from Best Lighting Products is engineered to meet the needs of communities prioritizing responsible outdoor lighting. With a true full cutoff design, the WPFCSR helps prevent light trespass and skyglow—making it ideal for projects that must comply with Dark-Skies legislation or local ordinances. Available in two high-output models, this wall pack delivers up to 17,186 lumens while allowing field-selectable color temperatures (3000K/4000K/5000K) for precise ambiance and application. Designed for durability, it features a bronze powder-coated, die-cast aluminum housing, IP65 and IK08 ratings, and an integrated photocell. 0–10V dimming and screw-in sensor readiness (with optional PIR or microwave sensors) ensure maximum energy efficiency. DLC Premium and cULus listed, this luminaire is backed by a 5-year warranty. Whether you're illuminating schools, walkways, or municipal buildings, the AMWM-CSR delivers high-performance lighting without polluting the night sky.
- category
- environment
- voltage
- CCT
- lens
- housing
- +1 more
- voltage: 120V → UNV
- spec →
The LAC Series crowned four-rung traditional acorn luminaire features a corrosion-resistant cast aluminum fitter with 11 decorative design options, combined with a high-impact clear acrylic globe with two available sizes. It utilizes a three-dimensional LED Power Array™, offering efficient IES distribution patterns (Types II, III, IV, and V). Available in neutral, cool, and warm white, with lumen maintenance of L94 at 60,000 hours, this fixture supports dimming and is UL® listed for wet locations. Optional features include mini-button photocells, motion sensors, and two lens configurations for diffused lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- voltage: 120V → UNV
- spec →
These 5" and 7" DarkSky certified wall fixtures offer focused, energy-efficient illumination while minimizing light pollution, making them ideal for environmentally conscious outdoor spaces. The photocell feature automatically adjusts to changing light conditions, providing energy-efficient illumination without requiring manual control.
- category
- environment
- voltage
- CCT
- housing
- spec →
Cobalt LED Retrofit are cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The units produce 1000 Lumen output and rendering 90+ CRI. Cobalt fixtures integrate the latest from the Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. An obvious and smart choice for Green Energy efficient lighting in commercial and residential applications. Features 5-year limited warranty Cree® COB LED with integrated driver 1000 lumens 3000K @ 90+ CRI Dimmable Includes medium base socket for easy retrofitting GU24 Socket adapter available for use with GU24 base housings cULus classified for Wet Location Certified to the high efficacy requirements of California Title 24 JA8-2025 Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing
- category
- environment
- voltage
- CCT
- spec →
The new Gardco Form 10 family of luminaires offers you a choice of optical systems to suit the needs of all your site lighting applications. Gardco designers were careful to maintain the retro-aesthetic that customers have responded to while providing a modern, updated version for today’s requirements. The ComfortEdge™ technology option achieves excellent photometric control and distribution performance, while creating a comfortable, reassuring environment that enhances outdoor spaces. Precision optic options are available for use at higher mounting heights or with applications requiring wider luminaire spacing and distributions for strict lighting control. If you have been searching for a stylish solution for your site and area applications, choose a ten… Form 10 from Gardco
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- voltage: 120V → UNV
- spec →
Adaptive Diecast Aluminum faceplate design allows for Vertical or Horizontal orientation. Powder Coated Faceplate Vertical or Horizontal Mounting Integrated LED board and driver Diffused lens behind faceplate Wet location listed for outdoor use IC Rated for direct contact with insulation Mounts in a standard single gang box Life span of 50,000 hours L70 Input Voltage: 120V
- category
- environment
- voltage
- CCT
- spec →
“GEN 3” - LED DUAL SELECTABLE FULL CUTOFF WALL PACK BUY AMERICA OPTION The DUMONT II GEN3 Series 9120G3 is traditional full cutoff wall pack constructed out of a die-cast aluminum housing and polycarbonate lens. The unit comes standard with 0-10V dimming capability and two power ranges with a dual selectable platform, wattage and color temperature, on each for jobsite versatility. Options include a pre-installed photocell and Buy America Compliancy. IP65 rated.
- category
- environment
- voltage
- CCT
- lens
- housing
- +1 more
- voltage: 120V → 120-277V
LED flood light with die-cast aluminum housing and back plate. Clear polycarbonate prismatic diffuser. Dusk-to-dawn operation. Motion Sensor.
- category
- environment
- voltage
- CCT
- spec →
The LITELUME™ LED Gooseneck Premium (LL-GNP) decorative luminaire incorporates a general light distribution for most applications. Constructed from heavy duty die-cast aluminum, the housing boasts outstanding corrosion protection, and unmatched versatility. Featuring 2700k, 3000k, 4000k, 5000k, 6500k CCT field selectable kelvin options along with an integrated photocell & cap. Ideal for multi-family, community and many other commercial & residential applications.
- category
- environment
- voltage
- CCT
- lens
- housing
- +1 more
- voltage: 120V → UNV
- spec →
TCS WiFi Smart Transformer: 150W/300W, stainless steel, smart app-controlled, 3 zones with dimming/scheduling, continuous power Smart Zone, 10-year warranty.
- category
- environment
- voltage
- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- spec →
LEM04 This product webpage has been discontinued, please see the suggested products below or contact your local sales representative.
- category
- environment
- voltage
- spec →
Juno® IC20LED 600LM, dedicated 5-inch LED new construction housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- spec →
The nLight® nWSXA is a low voltage wall switch with integrated sensors providing local control of lighting zones featuring toggle and/or raise lower. The sleek, modern design of the nWSXA enhances
- category
- environment
- voltage
- spec →
Transformer 150 The heart of a low-voltage outdoor lighting system is the transformer. Our rugged professional-grade multi-tap transformer sets the standard for ease of installation and adaptability to standard and app-based controls. Key Features Fully-potted, insulated, single-core transformer Easy on/off, secondary breaker switches on each common tap Two common lug terminals Amp loop to check the primary amperage on the transformer Accepts plug-in-timers, has direct photocell connection Angled terminal strip for easy wire connections, eliminates blind spots Heavy-duty stainless-steel cabinet with integrated mounting bar, lockable Removable bottom panel, 5 knockouts for wire connections Integrated short circuit and overload protection Includes 5’ grounded heavy-gauge power cord ETL tested, in conformance to ANSI/UL 1838 Electrical Specifications 150 watts with 4 taps: 12, 13, 14, 15 volts, Maximum total amps: 1.5A. Use any combination of terminal lugs but do not exceed transformer’s rated wattage on any lug.
- category
- environment
- voltage
- spec →
Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
120VAC swivel SPST conduit mounting with 6" wire length. Includes o-ring and lock nut. A photo cell-only configuration will turn on lighting whenever it sufficiently dark to trigger the photo cell, even during the middle of the day if there is a thunderstorm. A lighting system controlled by a photo cell will remain on until dawn, so lights will be on through the entire night.
- category
- environment
- voltage
- spec →
Magnitude's M150L24DC-AR is the most compact LED driver on the market with a magnetic transformer core. It is equipped with two auto-reset breakers, one on the input and one on the output, which protect both the load and driver. The driver is encased in a coated metal box that includes 2 knock-outs on the bottom to ena
- category
- environment
- voltage
- spec →
LIGHTING UNLEASHEDSinus has a lot to offer: The ring luminaire impresses with high visual comfort (choice of homogeneous opal diffuser or glare-free microprism), various light colours including HCL, countless colour options (housing, cable), direct or direct/indirect light emission and optional sensors. Moreover, sinus fits the pure 3 profile luminaire like a glove and can be combined as a system to implement individual lighting solutions. In the acoustic version – sinus.quiet – the luminaire not only provides ideal lighting but also influences the background noise in the room thanks to an internal, highly effective acoustic absorber for regulating the reverberation time.
- category
- environment
- voltage
- CCT
UL 1598 Classified Retrofit Kit; AC Driver-On-Board Technology; Data per NVLAP accredited laboratory; TRIAC dimmable to 5% (forward and reverse phase); Energy star CSD; 5 year warranty. Specifications • Input voltage: 120VAC; 50/60Hz • 13W, 14W, & 23W Models • Available in 3000K or 4000K • Constant current design •
- category
- environment
- voltage
- CCT
- spec →
HVR Colors combines high-voltage efficiency with driverless simplicity, making it perfect for large-scale applications requiring consistent, uninterrupted light.
- category
- environment
- voltage
Features Rugged A383 Cast Aluminum housing Available in 45W-150W power packages 140lm/w efficacy High Power LUMILED™ LED Engines Optional 3500K-6500K CCT Available with 120-277VAC or 347-480VAC […]
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → 120V/277V/347V/480V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps HALO
Full directory →43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
- Malmstrom White Co.Cooper (Eaton)
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco · Ventura
Los Angeles · San Diego
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
Georgia GA1 agency
- Ardd + WinterCooper (Eaton)
Atlanta · Savannah
Hawaii HI1 agency
- Sunburst DesignsCooper (Eaton)
Statewide
Idaho ID1 agency
Boise
Illinois IL2 agencies
Central
- The Lighting DigestCooper (Eaton)
Chicago
Indiana IN1 agency
- Specified Lighting Systems of IndianaCooper (Eaton)
Statewide
Iowa IA1 agency
- Mercer-ZimmermanCooper (Eaton)
Statewide
Kansas KS1 agency
- Mercer-ZimmermanCooper (Eaton)
Statewide
Kentucky KY1 agency
- Lighting AssociatesCooper (Eaton)
Louisville
Louisiana LA1 agency
- WKA LightingCooper (Eaton)
Baton Rouge · New Orleans · Shreveport
Maine ME1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Maryland MD1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Massachusetts MA1 agency
- Reflex Lighting GroupCooper (Eaton)
Boston · Springfield
Michigan MI2 agencies
- Clarus Lighting and ControlsCooper (Eaton)
Detroit
- Crites, Tidey & AssociatesCooper (Eaton)
Grand Rapids
Minnesota MN1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Mississippi MS1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
Missouri MO2 agencies
- Mercer-ZimmermanCooper (Eaton)
Kansas City
St. Louis
Montana MT1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Nebraska NE1 agency
- Mercer-ZimmermanCooper (Eaton)
Omaha
Nevada NV2 agencies
- CAL LightingCooper (Eaton)
Reno
- Nevada Sales AgencyCooper (Eaton)
Las Vegas
New Hampshire NH1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
New Jersey NJ2 agencies
- Enterprise Lighting SalesCooper (Eaton)
Northern NJ
- Lighting SolutionsCooper (Eaton)
Southern NJ
New Mexico NM1 agency
- Schroeder SalesCooper (Eaton)
Statewide
New York NY2 agencies
- Enterprise Lighting SalesCooper (Eaton)
NY City metro
- Quality Lighting SystemsCooper (Eaton)
Upstate
North Carolina NC2 agencies
- Q.LightingCooper (Eaton)
Greensboro · Raleigh
- Bodwell & AssociatesCooper (Eaton)
Charlotte
North Dakota ND1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Ohio OH2 agencies
- Clarus Lighting and ControlsCooper (Eaton)
Toledo
- Lighting & ControlsCooper (Eaton)
Cincinnati · Cleveland · Columbus
Oklahoma OK1 agency
- Premier Lighting SalesCooper (Eaton)
Statewide
Oregon OR1 agency
- SolusCooper (Eaton)
Statewide
Pennsylvania PA2 agencies
- Lighting SolutionsCooper (Eaton)
Philadelphia
- Architectural Lighting SalesCooper (Eaton)
Pittsburgh
Rhode Island RI1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
South Carolina SC1 agency
- Ardd + WinterCooper (Eaton)
Statewide
South Dakota SD1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Tennessee TN2 agencies
- Ardd + WinterCooper (Eaton)
Chattanooga · Knoxville · Nashville
- Perkins-Everitt Lighting & ControlsCooper (Eaton)
Memphis
Texas TX4 agencies
- Peterson Scharck & AssociatesCooper (Eaton)
Houston
- Legacy LightingCooper (Eaton)
Austin
- Texas Lighting SolutionsCooper (Eaton)
Dallas · El Paso
- 2M LightingCooper (Eaton)
San Antonio
Utah UT1 agency
- Quantum LightingCooper (Eaton)
Statewide
Vermont VT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Virginia VA1 agency
- JJM AssociatesCooper (Eaton)
Norfolk · Richmond · Roanoke
Washington WA2 agencies
- SeaTac Lighting & ControlsCooper (Eaton)
Seattle
- Ambient LightingCooper (Eaton)
Spokane
West Virginia WV1 agency
- Robert S. Kimball AssociatesCooper (Eaton)
Statewide
Wisconsin WI1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Wyoming WY1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.