Flex Compact gen3, RGB
Flex Compact gen3, RGB are flexible strands of large, high-intensity, full-color LED nodes designed for extraordinary video and graphic effects on expansive installations without the constraints of luminaire size, shape, or space. Each Flex Compact gen3, RGB strand consists of 50 individually addressable LED nodes, featuring dynamic integration of power, communication, and control. The flexible form factor accommodates two- and three-dimensional configurations, while high light output affords superior long-distance viewing for large-scale signage and building-covering video displays.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Cooper Lighting Solutions GUV Chamber is an eco-friendly and cost-effective tool that uses ultraviolet-C (UV-C) light sterilization to eliminate viruses and other pathogens. The chambers disinfect objects with the power of light. The chambers comply with all applicable regulations and standards (UV-C RISK GROUP 3IEC 62471).They are combined with safeguards such as controlled-access PIN number.
- category
- subcategory
- environment
- spec →
Regressed lens adjustable shower trim with reflector is designed for use with IC or Non-IC AIR-TITE 3" Halo small aperture line and low voltage housings. Models 3007WHC, 3007PCC and 3007SN have nonconductive and non-corrosive polymer trim rings. Models 3007AC and 3007TBZ have die-cast trim rings. This wet location listed shower trim uses MR16 low voltage or GU10 line voltage lamps, ideal for accent and task lighting. Regressed lens trim offers 15° tilt with 360° orientation within housing.
- category
- subcategory
- environment
- spec →
The iO Lighting MiniO Flex-Optic maintains the minimalistic form factor of the MiniO family while cleverly illuminating curvatures in architectural details. Four optimized optical distributions across four color temperatures provide enhanced, essential layers of light. The MiniO family reinforces creative design freedom with minimalistic flexible forms of light and remote drivers. Ideal for indoor or outdoor organic architecture where flexible top-bend architecture is necessary to illuminate small spaces. Utilize as a wallgrazer in a linear run with one of the four co-molded optical-grade silicone options, placing light on the desired details. This MiniO minimalistic, flexible form factor is available in 0-10V dimming via remote driver and creates runs up to 16.4' on a single power supply.
- category
- subcategory
- environment
A 5" aperture specification grade open slot cut reflector for 75W maximum low voltage MR16 tungsten-halogen lamps. Provides for up to 45° of lamp tilt. Distribution based on lamp beam angle. Use for accent lighting or general area illumination on slope ceilings up to 12/12 pitch.
- category
- subcategory
- environment
- spec →
The Lanterra 1000 Series of Accent & Flood luminaires offer incredible versatility in a highly durable construction to fit a wide range of applications. Available in three sizes 1002 (2.5"), 1003 (3.25"), and 1004 (4.25") the light heads mount via a rear center swivel with a 180° tilt and 340° rotation range allowing you to illuminate each layer of foliage, focal points, and façades in your environment. Specify the mounting option and optics to best fit your application, and fine tune light output with up to two optical accessories at a time.
- category
- subcategory
- environment
- beam angle
- spec →
The contractor Commitment Kit is a supplementary offering intended as an aid for installation and maintenance of Metalux™ fluorescent fixtures. The kit is comprised of several common lighting accessories to provide the contractor with increased value and convenience. Kit contents include Fluorescent lampholders, lamp clips, screws, fasteners and striplite end plates and socket tracks. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
- category
- subcategory
- environment
- spec →
The DMX light controller Output Interface (SCD96-NA) can control virtually any standard DMX device such as RGB fixtures, moving lights, dimmers, and effects. This unit provides DMX output that tracks 96 channels in the WaveLinx Wired system. These allow lighting sources that use DMX as the control signal to be used as part of the WaveLinx Wired system. This compact unit can be mounted virtually anywhere.
- category
- subcategory
- environment
- spec →
The 4421C is a static white, wet niche swimming pool fixture. The fixture will accentuate pools with breathtaking color temperatures, offering the latest LED innovations and advanced energy-saving
- category
- subcategory
- environment
- spec →
Pier Mount 6 The PM6 blends the bold lines of a square base with decorative scroll accents. Designed for mounting on pedestals or flat surfaces, it’s made from cast and extruded aluminum with a polyester powdercoat finish and a 2-7/8″ OD x 3″ tenon. BABA compliant.
- category
- subcategory
- environment
- spec →
This product reached it's end of life on July 25, 2024 The Outdoor Link System is an IP67 rated solution for linking specific Acclaim fixtures in series. It provides a quick and easy way to inter-connect units while eliminating excess hardware for a project. It is currently compatible with the Dyna Drum and Dyna Accent
- category
- subcategory
- environment
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Genlyte Solutions
Full directory →26 rep agencies carry the Genlyte Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- SESCO LightingSignify (Philips)
Birmingham · Mobile
Alaska AK1 agency
- Alaska Pro-SellSignify (Philips)
Statewide
Arizona AZ1 agency
- Allied Group SalesSignify (Philips)
Statewide
Arkansas AR1 agency
- SESCO LightingSignify (Philips)
Statewide
California CA2 agencies
- ALRSignify (Philips)
Fresno · Sacramento · San Francisco
- LINX Lighting + ControlsSignify (Philips)
Los Angeles · San Diego · Ventura
Colorado CO1 agency
- CT Lighting & ControlsSignify (Philips)
Statewide
Connecticut CT1 agency
- Apex Lighting SolutionsSignify (Philips)
Statewide
Delaware DE1 agency
- ELA + SynergySignify (Philips)
Statewide
District of Columbia DC1 agency
- Lighting EnvironmentsSignify (Philips)
Statewide
Florida FL1 agency
- SESCO LightingSignify (Philips)
Fort Myers · Jacksonville · Miami · Orlando · Panhandle · Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.