ILXC-RG
Exitronix · General Purpose · Exit Combo
Cross-References
30 equivalents across 20 brands
Compare top 3 →- spec →
LQM with Self-Diagnostic (SD): automatic 30-day/90-minute annual testing.
- category
- subcategory
- voltage
- housing
- spec →
The EXP Series is a slim-profile thermoplastic LED exit sign that offers modern design, including a standard flat faceplate, long-lasting and energy-efficient LEDs, and uniform illumination in an economical package.
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- wattage: 1W → 4.1W
- spec →
*** While Supplies Last, replacement item: NX-603D-LED *** For emergency applications, Nora Lighting offers its revolutionary, long life, low maintenance LED exit sign with battery backup. In the event of power loss, the LED light sources will remain illuminated at their full light level for 90 minutes. BODY 11-3/4" Width x 7-1/4" Height x 1-3/4" Depth Injection-molded thermoplastic housing FACE Single or dual configuration. Lettered face is provided if dual face is preferred 6" high text with color diffusion Replaceable knockout directional chevrons MOUNTING Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL 120V/277V input Total power usage: 3.3W LED light source NiCad (nickel-cadmium) replaceable battery 90 minute emergency operation Internal solid state charging circuit TESTING High-charge / ready operation indicator light Test button Automatic reset Circuitry Protection Short circuit and brown-out protection Disconnect for deep discharge LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL 924 NFPA NEC State & Municipal Suitable for damp locations Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEG-60: Wet Location Enclosure
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- voltage: UNV → 120V/277V
- wattage: 1W → 3.3W
Emergency lighting solution to keep exit routes safe and illuminated Emergency Light with two 1W LED glare-free light heads 120/277V 90 minutes of emergency operation Sturdy thermoplastic housing Suitable for wall and ceiling mount Test switch and battery charging indicator cUL listed for damp locations
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: UNV → 120V/277V
- spec →
The EXQM Series from the Holophane® Magellan family is an attractive, thermoplastic exit sign that delivers next level performance for a wide variety of indoor applications while raising the bar for
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- wattage: 1W → 4.3W
- spec →
HALOGEN-LED EMERGENCY THERMOPLASTIC WET LOCATION BUY AMERICA OPTION Black or white finish. 7.2 watt halogen lamps standard. Options include cold weather, 3.6 watt LED lamps, 5 watt LED lamps, CEC and Assembled in the USA.
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- voltage: UNV → 120/277V
- wattage: 1W → 7.2W
ILLUMINATION • Smooth thermoplastic or chrome plated metalized reflector with lens for optimal light distribution. • Available with MR-16 halogen or wedge base incandescent lamps. ELECTRICAL • Powered from low voltage power source with low voltage wiring (not provided). MOUNTING • Universal mounting base plate included with mounting hardware. •
- category
- subcategory
- environment
- spec →
PFX 5503 Thin Thermoplastic EXIT Sign. Ultra bright, energy efficient, long life Red or Green LEDs. Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. 1.2V long life, maintenance-free, rechargeable NiCd battery (EM models only). Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- category
- environment
- voltage
- spec →
Low-Profile wet location Exit and Emergency combo unit, 2.5" deep. Available in white, black and grey. Stocked in selectable Red/Green for convenience. Long lasting, efficient, ultra bright white LED lamp heads. 1.0W (1 LEDs x 1.0 watt) per head. Adjustable LED lamp heads provide up to 18-ft center-to center spacing with 3-ft path of egress at 7.5-ft mounting height.
- category
- environment
- voltage
- spec delta
- wattage: 1W → 2W
- spec →
The NYC compliant AtLite AUX series are designed for minimal presence in architecturally significant surroundings. The ordering and installation processes are greatly simplified as all housing and lens options are included. In addition, Eagle Eye self-diagnostics are standard on all self-powered units. Long life LED electronics coupled with nickel cadmium battery technology greatly reduces maintenance.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: UNV → 277V
- spec →
The Chloride AMS is an LED Architectural Message Sign with 4 faceplate styles and variety of mounting accessories. It is ideal for providing informational and warning messages in a wide range of architectural spaces. Used in Hospitals, X-ray Suites and other medical settings where it is critical to know if a space is occupied or not accesible to personnel.
- category
- environment
- voltage
- spec delta
- wattage: 1W → 9W
- spec →
This TCL Series EXIT HERE w/Down Arrows (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec →
Our Edge-Lit features an integrated and pivot system that allows it to be installed on the wall, ceiling or sloped surface. Available in Red or Green lettering, single face on mirrored acrylic panel
- category
- environment
- voltage
- spec delta
- voltage: UNV → 277V
- wattage: 1W → 2W
- spec →
The Fail-Safe EXL offers buyers one of the best high-abuse, specification-grade exit signs on the market. Its architectural low profile combines 14-gauge steel and a 1/8-inch polycarbonate lens to withstand the toughest environments. The door attaches to the housing with four tamper-resistant fasteners. LEDs power the unit for energy-efficient, even illumination. These fixtures are UL/cUL listed for damp locations. The EXL is specifically designed for use in public access areas where safety and security are critical; it is ideal for use in maximum security correctional facilities, public housing, schools, psychiatric wards, detention centers, military barracks, parks, and hospitals.
- category
- environment
- voltage
- spec delta
- voltage: UNV → 120V
- spec →
The EXRG Series from the Lithonia Lighting® Basics™ family is a thermoplastic exit sign that provides red/green switching capability in the field. The EXRG is available in a white or black finish.
- category
- subcategory
- environment
- voltage
- wattage
- housing
- spec →
The EEC Series is a slim-profile thermoplastic LED exit sign/emergency light combo that offers modern design, including a standard at faceplate,long-lasting and energy-efficient LEDs, an innovative LED lamp head and uniform illumination in an economical package.
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- wattage: 1W → 5W
- spec →
Compact, low profile LED exit signs are as brilliant and visible as standard incandescent signs, yet use a fraction of the power. LED light sources require no maintenance for 25 years–saving greatly on maintenance and upkeep costs. Nora Lighting’s LED exits are ideal for commercial and industrial standard non-emergency applications where low maintenance and operating costs are a must. NX-503-LED/G - Green "Exit" Letters, White Housing NX-503-LED/BG - Green "Exit" Letters, Black Housing NX-503-LED/R - Red "Exit" Letters, White Housing NX-503-LED/BR - Red "Exit" Letters, Black Housing BODY 12-1/8" Width x 8-5/8" Height x 1-3/4" Depth Injection-molded thermoplastic housing FACE Single or double face available. Lettered face provided if dual face is preferred. 6" high text with color diffusion Replaceable knockout directional chevrons MOUNTING Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL 120V/277V Input Total power usage: 2.7 Watts LED light source Isolated surge/short circuit protection Disconnect for deep discharge LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL 924 Suitable for damp location NFPA NEC State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXL-R: Red replacement lens NEG-60: Wet Location Enclosure
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- voltage: UNV → 120V/277V
- wattage: 1W → 2.7W
Combination Exit Sign with two Adjustable 2W LED Light Heads. Sealed maintenance free battery backup. Sturdy thermoplastic housing. Single or double face with 6" letters. cUL or ETL Listed.
- category
- subcategory
- environment
- spec delta
- wattage: 1W → 2W
- spec →
The QMH Series from the Holophane® Magellan family delivers next level performance for a wide variety of commercial indoor applications, such as: office spaces, hospitality, retail, multi-family and
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- wattage: 1W → 2.4W
- spec →
HALOGEN-LED EMERGENCY THERMOPLASTIC BUY AMERICA OPTION Black or white finish. 7 watt halogen lamps standard. Options include 3.6 watt LED lamps, 5 watt LED lamps and Assembled in the USA.
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- voltage: UNV → 120/277V
- wattage: 1W → 7W
- spec →
EVE exit sign with NiMH battery emergency operation, 90-min runtime, red letters, white housing.
- category
- subcategory
- voltage
- housing
- spec delta
- voltage: UNV → 120/277VAC
- wattage: 1W → 2.01W
ILLUMINATION • Two, 6V, 1.0W adjustable square LED lamp heads in engineering grade, high-impact resistant, thermoplastic. ELECTRICAL • Dual 120V/277V. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • LVD (low voltage disconnect) prevents battery from deep discharge. • 6V sealed lead acid,
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: UNV → 120V/277V
- spec →
- Housing is fiberglass reinforced polycarbonate construction in gray finish. Corrosion-resistant enclosure with one piece, high-impact resistant, UV stabilized polycarbonate lens and molded gasket with stainless steel screws. Five year warranty on all electronics and housing. Batteries prorated for five years. Meets UL924, UL844, NFPA101 Life Safety Code, NEC, OSHA, Local and State Codes. IP66 rated for Ingress protection. Rated for Class 1, Division 2, Groups A,B,C, & D. UL listed for wet locations (0°C – 50°C).
- category
- environment
- voltage
- spec delta
- wattage: 1W → 15W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →