RGB Keypad/Controller Module
When the MedLux CCT Lights or Color Changing Troffer systems are set for normal "RUN mode" operation, the display will present a continuously changing series of colors. This cycling action will repeat until instructed to "HOLD" or until one of the "PRESET" fixed colors is selected. Preset colors can be modified and saved at any time. Of course, the display can be turned off at any time using the "OFF" key.The time required to complete a full color cycle can be changed using a special key sequence described below. All preset colors and the cycle speed are retained when the system is turned OFF, or in the event of a power failure.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
24V DC Input Recessed wall panel maximum load of 288W For controlling multi-color (RGB) LED strip lighting PWM dimming technology provides smooth dimming and color mixing performance Dimensions: 86mm x 86mm **Requires Constant Voltage LED Driver, DRV60W(60W) or DRV100W (100W)
- category
- subcategory
- environment
- voltage
- spec →
The RGB-CT450 WiFi is a slim DMX512 wall controller featuring a sleek glass touch panel able to control multiple RGB and RGBW lighting zones. Its simple, modern design complements a wide range of architectural environments, while built-in WiFi connectivity allows seamless control via a dedicated app compatible with both iOS and Android devices. QUICK SPECFEATURESDIMENSIONSDOWNLOADS INPUT VOLTAGE OUTPUT SIGNAL POWER CONSUMPTION CONTROL MODE FINISH ZONES WIRELESS PROTOCOL OPERATING TEMPERATURE REMOTE DIMENSIONS 12-24V DC DMX512 + WiFi < 20mA RGB and RGBW White and Black 3-Zone Control WiFi 32°F (0°C) ~ 104°F (40°C) 3 x 4.7 x 1.1” (LxWxH) Key Features: Advanced Wireless Connectivity: Bluetooth 5.0 Mesh compatible for stable and expanded wireless network control. Zoned Lighting Flexibility: 4 Zone control, allowing for independent lighting areas. Dynamic Lighting Effects: 16 pre-set lighting modes for varied atmospheres. Intuitive User Interface: Touch control for direct and responsive operation. ⬇️ SPECIFICATION SHEET
- category
- subcategory
- environment
- voltage
- spec →
The Cirrus T-Bar Ceiling Modular System combines the Cirrus Ceiling Channel with various modular L, T, and X connectors to build geometric configurations, allowing you to be the fixture designer. You design it by following the 2x2 or 2x4 ceiling grid and we provide the layout, parts list, and directions for easy installation. For custom design and layout assistance, send drawings to design@PureEdgeLighting.com
- category
- subcategory
- environment
- voltage
- spec →
Our Dual Selectable Backlit Panels are commercial luminaires that utilizes advanced driver technology to provide an all in one luminaire, providing 3 wattages and 3 CCT options in each size panel.
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → UNV
- spec →
Suspended version - modern architectural luminaire, ultra-thin transparent optics panel, enveloped in a signature “I-beam” shaped frame.
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → UNV
- spec →
The Class D3X architectural recessed troffer offers subtle, clean geometry in a fully luminous door-frame design. This contemporary, high quality luminaire provides superior visual comfort and is dedicated to the latest solid-state lighting and driver technology for optimal performance and energy efficiency. Available in 2x2, 2x4, and 1x4 sizes, the D3X is an excellent choice for commercial office spaces, schools, hospitals or retail merchandising areas.
- category
- subcategory
- environment
- mounting
- spec delta
- voltage: 24DCV → UNV
- spec →
The Fail-Safe FCZ is a sealed, IP65 rated center basket troffer with high performance, visual comfort and aesthetics. Offered in three different sizes, multiple lumen packages, and optional polycarbonate lenses, the FCZ is an excellent choice for a wide range of applications including vandal-resistant, behavioral health, medical, cleanroom, and hose down.
- category
- subcategory
- environment
- mounting
- spec delta
- voltage: 24DCV → 120V/277V/347V/UNV
- spec →
This small aperture remodel housing is designed for 2x4 residential framing or ultra-shallow commercial plenums where energy savings, long life and optical control are required. The housing accepts a wide variety of HALO LED modules/trims allowing for accent, task and general lighting. The H245RICAT housing is designed for direct contact with insulation and the AIR-TITE design meets restricted air flow requirements.
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → 277V
- spec →
Crafted for tight plenum spaces without compromising control, the 3" Round Shallow Downlight & Adjustable deliver boutique-level precision in a compact form. Field-interchangeable optics and 365° rotation with lockable 35° tilt give designers and installers exact control over beam placement, intensity, and alignment. Engineered for 2x4 shallow housings, these luminaires bring sophisticated lighting solutions to residential and commercial interiors where every inch and every angle counts. With translating center beam technology, light always hits its mark—eliminating unwanted side glare and ensuring every surface is beautifully illuminated.
- category
- subcategory
- environment
- mounting
- spec delta
- voltage: 24DCV → UNV
3 Lamp, 4 ft. troffer with commercial electronic ballast.
- category
- subcategory
- environment
- mounting
- spec →
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Starter Fitting with DALI Control (ST-5LT) is the starting point for bringing the power and control system together. Converts conventional wiring and merges control wiring into MWS. Branch circuits are fed from the panel to a junction box with conduit and wire, while control circuits are run as Class 1 to meet local codes. The MWS Starter is mounted to the junction box with a ½” threaded lock nut connector. Power and control wires are then connected to the appropriate leads of the Starter
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → 120V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →