CRV-9-WH
Architectural emergency light with patented concealed LED light sources in elegant curved housing. 9W with two 4.5W lamps producing 850 lm. NiMH battery, ABS thermoplastic housing, white finish. Up to 85ft corridor spacing.
Cross-References
Top equivalents — 12 across 8 brands
Compare top 3 →Standard white ELM2L configuration for Contractor Select program.
- category
- voltage
- duration
- spec →
The Sure-Lites LED Emergency Battery Pack EBPLEDL series allows LED luminaires to be used for emergency lighting when power fails. When a power failure occurs, the EBPELDL switches the luminaire to emergency mode and provides 90 minutes of power for emergency egress lighting. The series are UL924 listed for field retrofit installation and are compatible with Cooper Lighting Solutions LED fixtures. The constant power feature ensures consistent light output for a minimum of 90 minutes.
- category
- voltage
- lumens
- wattage
The EB30 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB30 immediately switches to the emergency mode, keeping one or two lamps illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.
- category
- voltage
- lumens
- wattage
- spec delta
- voltage: 120/277 VAC field-selectable → UNV
- spec →
A surface mount enclosure with an emergency LED driver for use with 6" ELO and ELO+ luminaires. It adds 1-1/2" height to the luminaire and matches the finish. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Compatible with 6" ELO & ELO+ Matching decorative enclosure also available Listed for field installation - UL 924 and CSA C2.22 No 141 Includes integral test switch ELECTRICAL Input Voltage: 120VAC, 50/60Hz Output Voltage: 123/131VDC Wattage: 3W Illumination Time: 90 minutes OPERATION When AC power fails, the driver immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode. BATTERY Ternary lithium-ion battery requires 24 hours to recharge. COMPATIBLE LUMINAIRES NELO-6RTWMPW: 6" ELO with Selectable CCT, 1050lm / 15W, 90+ CRI (use NELO-6RW to match finish) NELOCAC-6RP: 6" ELO+ with Dedicated CCT, 700lm / 12W, 90+ CRI MATCHING DECORATIVE ENCLOSURE NSEM-6ND: Decorative Enclosure without Emergency Driver
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC field-selectable → 120V
- spec →
Mini Emergency Light with two 2W fully adjustable glare-free square shape light heads for emergency light. Injection-molded thermoplastic ABS housing Innovative snap-together design allows for fast and easy installation. 250 lm (total) 3.6V, 1.5Ah battery pack for 90 minutes of emergency operation. LED Driver: 120V/277V AC, dual voltage operation integrated with LED bulb. cUL listed for damp location.
- category
- voltage
- spec delta
- wattage: 16W → 2W
- spec →
This 8 watt nickel-cadmium (NiCd) battery backup system is designed for use with the Edge Round 8'' flush mount (sold separately). It provides 90 minutes of power to the Edge Round 8'' flush mount to allow lighting for emergency egress or continuation of key operations during a loss of power.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC field-selectable → 120V
- spec →
The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.
- category
- voltage
- spec delta
- wattage: 16W → 1W
White-finish EU2C Basics emergency unit with square lamp heads.
- category
- voltage
- duration
- spec →
The Sure-Lites Emergency Light SEL series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a power outage. Key features of the series include: a nickel cadmium battery capable of providing up to 16 watts of remote capacity, polycarbonate housing and heads, long life and maintenance free LED source with proprietary accuLED optics, as well as self-diagnostics that perform NFPA required monthly testing. The remote capable versions are fully compatible with SRP/SRM/SRPA LED remotes. The patented external battery disconnect and easy hang features reduce installation time and cost. The SEL series is designed for indoor commercial or industrial use.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC field-selectable → 277V
- spec →
The EB14 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB14 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.
- category
- voltage
- lumens
- wattage
- spec delta
- voltage: 120/277 VAC field-selectable → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Evenlite
Full directory →52 rep agencies carry the Evenlite line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting PartnershipCurrent
Birmingham · Mobile
Alaska AK1 agency
- Alaska Architectural LightingAcuity Brands
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- ALRSignify (Philips)
Fresno · Sacramento · San Francisco
- OCS Lighting & ControlCurrent
San Diego
- PLP SoCalCurrent
Los Angeles · Ventura
Colorado CO1 agency
- The Lighting AgencyAcuity Brands
Statewide
Connecticut CT1 agency
- illuminateCurrent
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
Jacksonville
- Karl Volk & Co.
Panhandle
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.