LS Series
A multitude of options makes LS Series emergency lighting extremely versatile to suit a wide range of requirements. Available in 6, 12 and 24V units with up to 220W capacity. Specify 1 to 3 lamp heads in different styles, and choose from 4W, 5W, and 6W LED lamps.
Cross-References
Top equivalents — 4 across 3 brands
Compare top 3 →Halco # 95012 Evade Single Outdoor Remote Head EV-RH-1-OUT quality egress lighting solution for hallway, stairwell, and other Life Safety applications UL924 Code Life Safety
- category
- environment
- voltage
- spec delta
- wattage: 220W → 8W
- spec →
Our new Mullion Mount CY-UDC Series has AC only mode (wall switch with AC general lighting) and DC only mode (DC 6-24V input using model RPS07) AC/DC mode (Both general lighting and extra DC 6-24V backup using model RPS07).
- category
- environment
- voltage
- spec delta
- wattage: 220W → 10W
Lighting system for walkways designed for use with LED light sources to ensure high visual comfort. Recessed installation. Comprising an optical compartment with IP66 protection rating and wall-mounted casing (to be ordered separately). Optical compartment and base strip in aluminium alloy with powder paint coating treatment to ensure high resistance to atmospheric agents and UV rays. Plastic closure casing in the rear part of the optical compartment. Complete with plastic cable gland and output cable 0.5 m long Black plastic frame casing to be ordered separately Disposable polystyrene casings are available to create casing seats for applications in concrete walls finished afterwards with plaster or tiles. Tempered frosted sodium-calcium safety glass. Luminaire without visible screws with anti-vandalism system involving a key to open access to the rear wiring compartment (supplied in the packaging) for rectangular 270x90mm versions. Quick fitting rear opening system for rectangular 180x45mm versions. Versions with 24Vdc remote power supply (rectangular 270x90 / 180x45 mm). Protection against over-voltages (220 ÷ 240Vac versions): 2kV in Common Mode (CM), 1kV in Differential Mode (DM). Application ambient temperature: Ta -30°C +50°C for 24Vdc versions Ta -20°C +50°C for 220-240Vac versions (On-Off- DALI) Ta 0°C +45°C for 220-240Vc versions in emergency All external screws used are in A2 stainless steel.
- category
- environment
- voltage
- spec delta
- voltage: 24DCV → 240V/24DCV
Lighting system for walkways designed for use with LED light sources to ensure high visual comfort. Wall installation. Comprising an optical compartment (IP66 protection class) and wall base strip casing to be ordered separately. Optical compartment in aluminium alloy with powder paint coating to ensure high resistance to atmospheric agents and UV rays. Plastic closure casing in the rear part of the optical compartment. Complete with plastic cable gland and 0.5 m long outgoing cable Tempered frosted sodium-calcium safety glass. Luminaire without visible screws With anti-vandalism system involving a key to open and access the rear wiring compartment (supplied in the packaging). With remote 24Vdc power supply (rectangular 270x90 mm). Protection against over-voltages (220 ÷ 240 versions): 2kV in Common Mode (CM), 1kV in Differential Mode (DM). Ambient operating temperature: Ta -30°C +50°C for 24Vdc versions, Ta -20°C +50°C for 220-240Vac (On-Off) versions, All external screws used are in A2 stainless steel.
- category
- environment
- voltage
- spec delta
- voltage: 24DCV → 240V/24DCV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →