11900
EarthTronics 4FT LED Vapor Tight features NFS, NEMA 4X and IP66 wet location rated Color and Wattage Selectable Vapor Tight LEDs designed for faster installation in commercial and industrial lighting applications. Ideal for food processing areas, commercial kitchens, cold storage, parking garages, walkways, stairwells, utility areas, under canopy, outdoor retail and other wet, dusty, and dirty environments, the Color and Wattage Selectable Vapor Tight LEDs are available in multiple color and watt combinations. The new Vapor Tight LEDs offer the choice of two temperatures (4000K and 5000K) and feature a high 80+ CRI. Both the light color temperature and the lumen level can be set at the time of installation with a switch located on the LED module holder plate to ensure the proper lighting for improved visual acuity and application requirements. All the fixtures accept 120 – 347-volt AC power supply and are equipped with 12VDC auxiliary power prewired for easy installation of advanced lighting controls. In addition, they have a 0-10 volt dimming standard and will perform in temperatures ranging from -40°F (-40°C) to 122°F (50°C) when suspended at least 18″ from ceiling. To meet specific area energy codes an internal multi-function sensor can be installed and then operated with a remote test control to set occupancy, daylight harvesting and dim to off functions. An emergency back-up driver is available. Designed for simple installation, the vapor tight features a UL 94 5VA polycarbonate housing that allows the wires to be connected directly inside of the housing without internal junction box or silicone conduit. The gasket polycarbonate housing has stainless steel latches with a sealed lens that meets IP66-rated requirements for wash down and dusty conditions. The fixtures are suitable for applications that may require wash down and/or experience cold temperatures or moderate impacts.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
FEATURES: 3 Watts 3CCT, Built in photocell (can bypass it) Heavy Robust fast dissipation aluminum, and easy access wiring Black Housing, IP65, ETL DLC PREMIUM 50,000 hours lifetime CONSTRUCTION: Heavy die-cast aluminum alloy housing with black powder-coated finish. Glass lens. OPTICAL SYSTEM: High brightness lumileds LED chips. High quality transmission glass optics.120° beam angle. ELECTRICAL: Available as 120-277V input. -20°C to 45°C INSTALLATION & MOUNTING: 3'’ round pole mounting by heights 15 to 30ft.
- category
- environment
- lumens
- CCT
- wattage
- spec delta
- voltage: 12DCV → UNV
- beam_angle: 40° → 20°
- spec →
Efficient Illumination for High-Ceiling Spaces. Signum 16 is a foundational high-ceiling luminaire that reflects Meteor’s early entry into the large-scale architectural lighting market. Its perforated cylindrical form balances visual presence with restraint, making it a familiar yet enduring solution for expansive interior spaces. With efficiency and clarity in mind, Signum 16 focuses on delivering consistent, high-quality white light without unnecessary complexity. With output reaching up to 23,000 lumens at 117 lm/W, Signum 16 provides reliable illumination for large volumes while maintaining energy performance. DMX control compatibility allows the fixture to integrate into more advanced lighting systems, supporting architectural environments that require both scale and control.
- category
- environment
- lumens
- CCT
- CRI
- beam angle
- +1 more
- voltage: 12DCV → 120V/277V
- spec →
The Berretto is designed for the harsh environments found in food processing, heavy manufacturing, cold storage, warehouse, and distribution facilities. The IP66 waterproof rated fixture can operate in extreme temperature ranges. This fixture is ideal for new construction or as an upgrade on existing linear fluorescent and HID high-bay fixtures PERFORMANCE Lumen Output 24,000 lumens Lifespan L70 > 72,000 Hours Ambient Temperature -40°F to 131°F (-40°C to 55°C) Warranty 5 Years Efficacy Up to 160 LPW Power Washing Up to 1600 PSI ELECTRICAL Operating Voltage 120-277V Input Frequency 50/60Hz Input Wattage 150W Surge Protection 4 kV (10kV or 20kV optional) Dimming 0-10V Power Input Standard 6’ Yellow Cable (5-Conductor Wire to Pigtails) (Black, White, Green, Purple, Gray) CONSTRUCTION IP Rating IP66 IK Rating IK10 Dimensions 5.4”H x 17.9”W Housing Die Casted Aluminum Alloy Finish Common Epoxy Resin Powder Coat Lens Polycarbonate (Not Recommended for Alkaline Industrial Cleaners) OPTICAL CRI ≥80 CCT 4000K, 5000K Beam Angle 90°
- category
- environment
- lumens
- CCT
- CRI
- wattage
- +2 more
- voltage: 12DCV → 120V/277V
- spec →
The VRVT1 series is the contractor go to complex environment luminaire that combines the rugged, wet location rated construction of a vaportite with selectable CCT and lumens. The VRVT1 is available in 4' and 8' sizes, performance up to 11,500 lumens with emergency back-up and sensor options. VRVT1 boasts an IK10 rated lens and housing sealed with Torx head tamper-resistant screws for added protection.
- category
- environment
- CCT
- CRI
- housing
- spec delta
- voltage: 12DCV → UNV
- wattage: 135W → 78W
- spec →
The Halo MSS153T outdoor security floodlight incorporates an adjustable motion sensor, field-selectable CCT, and advanced two-stage optics into a single head LED design ideal for a wide variety of applications. Features improved adjustability, easy install components, and adaptor plate kit for hassle-free installation. The motion sensor is available with 180° detection up to 50’ range, with adjustable sensitivity and duration from 1-12 minutes. The durable die-cast aluminum housing is available in bronze or white powder coat finish, ensuring years of reliable, maintenance-free operation.
- category
- environment
- CCT
- wattage
- spec delta
- voltage: 12DCV → 120V
- lumens: 21600 → 3000
- spec →
The classic lines and sophisticated construction of the Vision Wall luminaire make it an ideal complement to architectural site design. Offering LED technology across the site, flood and wall mounted fixtures the Vision series provides true family scaling in both physical form and lumen capability for architectural site lighting applications.
- category
- environment
- CCT
- wattage
- spec delta
- voltage: 12DCV → 277V
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- CCT
- beam angle
- spec delta
- voltage: 12DCV → 277V/347V/480V
- wattage: 135W → 450W
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- CCT
- beam angle
- spec delta
- voltage: 12DCV → 277V/347V/480V
- lumens: 21600 → 3828
- wattage: 135W → 67W
- spec →
Metalux LED High Bay with superior performance in a durable, compact design
- category
- environment
- CCT
- CRI
- beam angle
- spec delta
- voltage: 12DCV → UNV
- wattage: 135W → 266W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps EarthTronics
Full directory →18 rep agencies carry the EarthTronics line across 32 states. Pick your state.
Arkansas AR1 agency
- Curtis Stout, Inc.Current
Statewide
Colorado CO1 agency
Statewide
District of Columbia DC1 agency
Statewide
Florida FL1 agency
- FRM Lighting & ControlsCurrent
Fort Myers · Jacksonville · Miami · Orlando · Tampa
Georgia GA1 agency
- Lighting Associates, Inc.Acuity Brands
Atlanta · Savannah
Idaho ID1 agency
- The Reeves Company
Boise
Illinois IL1 agency
- Electrical Marketing Group
Central · Chicago
Indiana IN1 agency
- Energized Sales Company
Statewide
Iowa IA1 agency
- Perry & Associates
Statewide
Kansas KS1 agency
Statewide
+22 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.