11844
NFS, NEMA 4X and IP66 wet location rated Color and Wattage Selectable Vapor Tight LEDs designed for faster installation in commercial and industrial lighting applications. Ideal for food processing areas, commercial kitchens, cold storage, parking garages, walkways, stairwells, utility areas, under canopy, outdoor retail and other wet, dusty, and dirty environments, the Color and Wattage Selectable Vapor Tight LEDs are available in multiple color and watt combinations. The new Vapor Tight LEDs offer the choice of three temperatures (3500K, 4000K and 5000K) and feature a high 80+ CRI. Both the light color temperature and the lumen level can be set at the time of installation with a switch located on the LED module holder plate to ensure the proper lighting for improved visual acuity and application requirements. The 2-foot fixture offers 15-, 20- and 25-watt settings providing 1950, 2600 and 3250 lumens. The 4-foot fixture provides 34-, 38- and 45-watt settings delivering 4420, 4940 and 5850 lumens, while the 8-foot fixture offers 65-, 75- and 90-watt settings producing 8450, 9750 and 11700 lumens, respectively. All the fixtures accept 120 – 277-volt (347V available) AC power supply and are equipped with 12VDC auxiliary power prewired for easy installation of advanced lighting controls. In addition, they have a 0-10 volt dimming standard and will perform in temperatures ranging from -40°F (-40°C) to 122°F (40°C). To meet specific area energy codes an internal multi-function sensor can be installed and then operated with a remote test control to set occupancy, daylight harvesting and dim to off functions. An emergency back-up driver is available. Designed for simple installation, the vapor tight features a UL 94 5VA polycarbonate housing that allows the wires to be connected directly inside of the housing without internal junction box or silicone conduit. The lens and LED module board are both integrated. The gasketed polycarbonate housing has stainless steel latches with a sealed lens that meets IP66-rated requirements for wash down and dusty conditions. The fixtures are suitable for applications that may require washdown and/or experience cold temperatures or moderate impacts. The Color and Wattage Selectable Vapor Tight LEDs are UL and NSF approved for use in food processing and other clean room applications where washdown and product safety are important. The new LEDs from EarthTronics meet utility requirements for rebates in most market areas. All are UL 1598 listed with an L70 >100,000 hour performance life. DLC® listed for low bay fixtures.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The PFX-5608 is a highly versatile, 4-foot vapor-tight LED luminaire designed for durability and precision in demanding environments. This sensor-ready fixture features field-selectable CCT (3500K, 4000K, and 5000K) and tri-lumen output ranging from 5,000 to 7,000 nominal lumens, allowing for complete on-site customization. Built to last, it boasts an impressive L70 life of 178,000 hours and a rugged polycarbonate housing with an IK10 impact rating. It is engineered for extreme conditions with an IP65 ingress protection rating and an operating temperature range of -40 Degree C to 43 Degree C . The unit comes standard with a 0-10VDC dimming driver and offers optional emergency backups or NSF certification for food equipment zones. Installation is simplified with included surface mount kits and v-hooks, making it an ideal choice for both new construction and retrofits.
- category
- environment
- voltage
- CCT
- CRI
- beam angle
- +2 more
- voltage: 120V/277V/347V/12DCV → UNV
- spec →
The LITELUME™ LED Heavy Duty Dock Light ( LL-HDDL ) is a high performance robust LED solution designed with versatility. Rugged, die-cast aluminum housing with UV resistant marine grade powder coat finish and a Premium LED driver with High Performance LED's. Applications include waterfront, marinas, docking, commercial and industrial corridors, loading areas and general work zones
- category
- environment
- voltage
- lumens
- CCT
- wattage
- +1 more
- voltage: 120V/277V/347V/12DCV → UNV
- spec →
The Iridium i2 WaveStream luminaire merges classic design with cutting edge technology to provide quality illumination and superior optical control. Using the WaveStream LED direct/indirect light engine, its wide batwing distribution makes it an excellent choice for lower ceiling applications and areas where ceiling uniformity is important. Available in 4’ and 8’ sections with a multitude of options, the Iridium i2 WaveStream is well suited for commercial office spaces, schools, libraries and other architectural interiors. The WaveStream LED direct/indirect light engine is also available in several other popular Corelite series including the Element, Loft, Minigator and Vertechs.
- category
- environment
- voltage
- CCT
- CRI
- beam angle
- +1 more
- voltage: 120V/277V/347V/12DCV → UNV
- wattage: 25W → 87.7W
- spec →
Fail-Safe Vandal Resistant 11" Round, Wall or Ceiling, 10 - 25 Watt, IP65
- category
- environment
- voltage
- lumens
- CCT
- wattage
- +1 more
- voltage: 120V/277V/347V/12DCV → UNV
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- lumens
- CCT
- spec delta
- voltage: 120V/277V/347V/12DCV → 277V/UNV
- beam_angle: 40° → 90°
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- lumens
- CCT
- beam angle
- +1 more
- voltage: 120V/277V/347V/12DCV → 277V/347V/480V
- wattage: 25W → 67W
- spec →
The Cruze LED Retrofit Kit is our newest LED lighting solution for customers looking to upgrade their fluorescent luminaires to a high performing aesthetically-pleasing LED system without the need to install a complete luminaire. This innovative, high quality retrofit kit is dedicated to the latest solid state lighting and driver technology for optimal performance and energy efficiency. The retrofit kit is engineered for simple and quick installation making it easy to switch to LED.
- category
- environment
- voltage
- lumens
- CCT
- spec delta
- voltage: 120V/277V/347V/12DCV → UNV
- wattage: 25W → 14W
- spec →
Square Canopy Luminaire Field Selectable Output & CCT The AMCP-SR10 is a versatile, field-customizable LED canopy light with selectable output from 3,000 to 12,000 lumens. It features CCT selection (3000K/4000K/5000K), a switchable built-in photocell, and a sensor-ready receptacle for PIR or microwave sensors. Designed for easy installation, the fixture is DLC Premium listed, IP65 rated, and available in white or bronze finishes.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- voltage: 120V/277V/347V/12DCV → UNV
- wattage: 25W → 160W
- beam_angle: 40° → 87.4°
The GLS Series luminaire by Sun Valley Lighting features a traditional crowned prismatic borosilicate glass refracting lens with a corrosion-resistant cast aluminum base and decorative rungs. The luminaire base fitter has a 3” I.D. opening for tenon mounting, and comes in 2 design options. The LED Power Array offers symmetric radial distribution, with Type-III or Type-V distributions controlled by the refracting globe. High-power LEDs are available in Warm White (2700K, 3000K), Neutral White (4000K), and Cool White (5000K), with L93 lumen maintenance at 100,000 hours. The luminaire includes a 0-10V dimmable driver with surge protection and optional True Amber LEDs for wildlife-friendly lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- lumens
- CCT
- spec delta
- voltage: 120V/277V/347V/12DCV → 347480
- wattage: 25W → 72W
- spec →
The 8520 Series (8520SER) is a contemporary, durable and energy-efficient area step lighting solution designed for low level and directional lighting in outdoor environments. Constructed with a heavy-wall cast aluminum housing and available in both louvered and open face designs, it ensures long-lasting performance. Featuring high-output LED emitters in neutral, cool, or warm white color temperatures, the 8520SER delivers bright, uniform illumination. Its tempered glass lens, robust LED driver, and thermal management make it ideal for demanding applications. With multiple color finishes and voltage options, this fixture offers flexibility for customization. Perfect for enhancing outdoor visibility while maintaining energy efficiency. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- lumens
- CCT
- wattage
- +1 more
- voltage: 120V/277V/347V/12DCV → 277V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps EarthTronics
Full directory →18 rep agencies carry the EarthTronics line across 32 states. Pick your state.
Arkansas AR1 agency
- Curtis Stout, Inc.Current
Statewide
Colorado CO1 agency
Statewide
District of Columbia DC1 agency
Statewide
Florida FL1 agency
- FRM Lighting & ControlsCurrent
Fort Myers · Jacksonville · Miami · Orlando · Tampa
Georgia GA1 agency
- Lighting Associates, Inc.Acuity Brands
Atlanta · Savannah
Idaho ID1 agency
- The Reeves Company
Boise
Illinois IL1 agency
- Electrical Marketing Group
Central · Chicago
Indiana IN1 agency
- Energized Sales Company
Statewide
Iowa IA1 agency
- Perry & Associates
Statewide
Kansas KS1 agency
Statewide
+22 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.