11801
The 11801 Bluetooth® Mesh sensor incorporates a full function PIR sensor. PIR occupancy sensor supports setting delay time and bi-level dimming of the sensors through EarthConnect APP. The 11801 is capable of daylight harvesting, and can allow for continuous dimming according to your desired light level. It is powered by EarthConnect fixture controller 11800 (ordered separately). The 11801 sensor is a popular choice when controlling LED downlight fixtures, LED troffer and LED panel lights.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
60W–400W exterior-rated LED power supply for 12VDC/24VDC products, with Xitanium drivers, UL enclosure, and flexible dimming module options.
- category
- environment
- voltage
Splits power line connector from LED drivers into two separate leads, requires power line cable. Voltage: 12V or 24V Length: 5" Finish: White Compatibility: 12V or 24V LED Drivers
- category
- environment
- voltage
- spec →
Installation: Factory / Jobsite install through 1/2” knockout hole, 12V AUX power required
- category
- environment
- voltage
The Amico DC Lighting Controller (DCLC) is a modular multi-zone power supply system for LED lighting applications in the MRI environment. The DCLC provides quiet, reliable power anywhere in the imaging space and fits any lighting application from general down and directional lighting to custom slot lighting and image ceiling applications. Achieve multi-zone dimming through standard 0-10V wall box dimmers or Amico's mobile lighting application. This lighting controller is Certified to meet MRI vendor EMI requirements.
- category
- environment
- voltage
The RGB-CT550 Wireless Receiver & Control System controls up to 4 independent zones of RGBW (Red, Green, Blue, and White) light. With the addition of white light, brighter colors can be achieved as well as the introduction of the pastel range, which will satisfy color requirements for the most discerning lighting designers. Remote and Receiver sold separately. QUICK SPECFEATURESDIMENSIONSDOWNLOADS RECEIVER (RGB CT-550) INPUT VOLTAGE MAX CURRENT LOAD MAX OUTPUT POWER REMOTE DISTANCE WIRELESS SIGNAL WORKING TEMPERATURE PROTECTION DC5V ~ DC24V 5A x 4CH MAX 20A 240W (12V) | 480W (24V) 50 meters 2.4 GHz -22ºF (-30ºC) ~ 131ºF (55ºC) Reverse Connection Protection, Over Current, Overheat, Short Circuit HANDHELD REMOTE (RGB CT550RX – SOLD SEPARATELY) POWER SOURCE WORKING FREQUENCY WORKING TEMPERATURE REMOTE DISTANCE REMOTE TYPE DIMENSIONS WEIGHT 2 pack AAA battery 2.4 GHz -22ºF (-30ºC) ~ 131ºF (55ºC) 50 meters 4 Zone Control 145mm x 55mm x 22mm (LxWxH) 200g (0.44lbs) Key Features: Wireless RGB/RGBW Control: RGB/RGBW wireless zone receiver for flexible and cable-free lighting control. Intuitive Color Selection: Color wheel picker for easy and precise color selection. Flexible Zoned Lighting: Customizable 4 independent zones, allowing for segmented lighting designs. Extended Wireless Range: Remote range up to 50 meters, providing ample control distance. Remote Control Compatibility: Designed for use with a wireless remote (sold separately). ⬇️ SPECIFICATION SHEET ⬇️ USER MANUAL
- category
- environment
- voltage
- spec →
The BCM01 provides luminaire-level lighting control in a compact design. It operates on a 12VDC input from a dimmable, dim-to-off LED driver. The module works seamlessly in conjuction with the SC010 to enable wireless control of fixtures, or groups of fixtures, through the LiteSmart app.
- category
- environment
- voltage
- spec →
The NLCSPEJ is a low-voltage Bluetooth wireless PIR/Daylight sensor with a 3.5mm Jack/AUX connector, designed for the NICOR NLC System, perfect for Luminaire Level Lighting Controls (LLLCs). Constructed from high-rated fire retardant material, this sensor offers easy installation and use, with a plug-n-play system for fixtures with a 12V output 3.5mm jack sensor socket ready. Providing 360° coverage at heights from 20Ft to 40Ft, it offers long-term flexibility, better occupant experience, and cost efficiency compared to non-controlled fixtures, making it ideal for warehouses, garages, gymnasiums, and other industrial spaces.
- category
- environment
- voltage
- spec →PureEdge LightingPure Smart™ CV96W DW Bridgebox 12V-24VDC, Single Channel Static White, Connected By WIZ Propartial
The Pure Smart™ CV96W Bridgebox DW enables wireless control of a constant voltage, Single Channel, Static White (excluding Warm Dim strip) LED load with the WiZ Pro wireless control ecosystem. The CV96W has both Wi-Fi and Bluetooth connectivity. No Hub Required. Voice control can be achieved by integrating with Alexa, Google Assistant, Siri Shortcuts, Smartthings, and IFTTT. Only for use with a non-dimmable driver (PSBR- 96W-24VDC sold separately)
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps EarthTronics
Full directory →18 rep agencies carry the EarthTronics line across 32 states. Pick your state.
Arkansas AR1 agency
- Curtis Stout, Inc.Current
Statewide
Colorado CO1 agency
Statewide
District of Columbia DC1 agency
Statewide
Florida FL1 agency
- FRM Lighting & ControlsCurrent
Fort Myers · Jacksonville · Miami · Orlando · Tampa
Georgia GA1 agency
- Lighting Associates, Inc.Acuity Brands
Atlanta · Savannah
Idaho ID1 agency
- The Reeves Company
Boise
Illinois IL1 agency
- Electrical Marketing Group
Central · Chicago
Indiana IN1 agency
- Energized Sales Company
Statewide
Iowa IA1 agency
- Perry & Associates
Statewide
Kansas KS1 agency
Statewide
+22 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.