64102161
8’ T8 Power Double End Power Integral Driver Glass Tube, DLC
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Featuring a contoured architectural housing, design elements on the side panels for visual interest, and moveable mounting hardware that slides the length of the fixture, the AXA series, available in T5/T8 or LED, is ideal for offices, classrooms, or conference rooms.
- category
- environment
- voltage
- lumens
- wattage
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 2700K
- spec →
A unique form factor numerous mounting and lamping options make Palladium the perfect luminaire for creative applications in which a strong visual impact is desired.
- category
- environment
- voltage
- lumens
- wattage
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 2700K
- spec →
The slender cylindrical form of the RESIDENZA SZ column adds a subtle styling element to pedestrian areas. The extruded aluminum shaft with flush hand hole transitions seamlessly to the cast aluminum luminaire housing. Cylindrical lens is matte acrylic. Luminaire is available with LED or ceramic metal halide light sources. Luminaire and column are finished in finely textured paint. The illuminating column is available in flanged or flangeless models. All hardware is stainless steel.
- category
- environment
- voltage
- lumens
- wattage
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 3000K
- spec →
24 watt EarthBulb direct wire LED linear T5 eliminates the ballast for maximum energy savings. Available in 5000K with 300 degree beam angle. Great light output and perfect for replacement of 54 watt T5H0 fluorescent tubes. This linear tube provides 3500 lumens and has a CRI of 82. This lamp is engineered for high lumen maintenance over its 50,000 hour rated. To install, simply remove the existing fluorescent ballast and direct wire the line voltage. Direct wire quickly, no lamp holder modifications necessary, just run the black (load) to the one end and white (neutral) to the other. Operates on 120-277V, 60Hz, double end live feed, direct wire.
- category
- environment
- voltage
- CCT
- wattage
If your fluorescent fixture is from 2.75”-5” wide, the adjustable Litetronics LED Strip Retrofit offers the fastest and least expensive way to upgrade to LED energy efficiency and the polished look of a new diffuser lens. Our Strip Fixture Retrofit provides considerable installation savings compared to a new fixture. You can use the existing building wiring and fixture base frame. The assembly process is simple. Plus, there’s less waste disposal, and no post- installation work needed to touch-up the ceiling paint to match a new fixture outline. With our 10-year warranty and a 100,000 hour-rated life, we provide a pay-off that lasts as long as any fixture in the market. You will eliminate the parts and labor costs needed for fluorescent tube replacements. You will eliminate your ballast worries, and save over 70% in energy costs compared to your existing fluorescent fixture.
- category
- environment
- voltage
- CCT
- wattage
- spec →
The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D2 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.
- category
- environment
- voltage
- lumens
- CCT
- spec delta
- voltage: 120V/277V → UNV
- spec →
Designed to fit into decorative exterior fixtures, these easily install into existing mogul based HID sockets for significantly improved lighting and life, as well as significant energy savings.
- category
- environment
- voltage
- lumens
- CCT
- spec delta
- voltage: 120V/277V → 120-277V
- wattage: 59W → 400W
- spec →
Open wall luminaires with a high level of efficiency, characterized by an elongated design. As solid and reliable lighting tools with modern lamp technology and high-quality workmanship, they will provide very cost-effective service over long operating periods.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 4000K
- spec →
The Juno® TC1RC TC rated, line voltage remodel housing features factory-installed, screw-driven remodel clamps for fast, simple installation into non-insulated ceilings. Detachable, medium base
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120V
PackLume Compact The PKLM small full cutoff wall luminaire is available in three wattages with a specially designed Type IV wide forward throw optical distribution that is designed to replace HID lighting systems of up to 175W MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 12 to 25 feet can be used based on light level and uniformity requirements. BAA compliant. UL listed for wet location. IP66 rated.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 3000K
- spec →
The LAB Series crowned traditional acorn luminaire features a durable, corrosion-resistant aluminum fitter and crown with a high-impact clear acrylic globe - available in two globe sizes and includes multiple decorative fitter options. It utilizes a three-dimensional LED Power Array™ with individual tubes aimed for wide, efficient light distribution (Types II, III, IV, and V). Available in neutral, cool, and warm white LEDs, it offers lumen maintenance of L94 at 60,000 hours. The fixture supports dimming, is wet-location listed, and features a polyester powder coat finish for durability. Optional photocells, motion sensors, and fuses are available. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 2700K
- wattage: 59W → 2W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ETi Solid State Lighting
Full directory →26 rep agencies carry the ETi Solid State Lighting line across 43 states. Pick your state.
Alabama AL1 agency
Birmingham · Mobile
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA2 agencies
- C.J.S. LightingAcuity Brands
Sacramento
- Stellar Sales
Los Angeles · San Diego · Ventura
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Dans Company
Statewide
Florida FL2 agencies
Fort Myers · Jacksonville · Miami · Orlando · Tampa
Panhandle
Georgia GA1 agency
Atlanta · Savannah
+33 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.