ET526-24W
Use with 1 or 2 circuit track and accessories. Lamp: 12V 50W MR16. This track head comes standard as H Style. J (Juno) and L (Lightolier) styles are available: For J style please order PJTLO (W/B) with the track head. For L style please order PLTLO (W/B) with the track head. Note these must be factory installed. Fixture comes with: (1) 12V solid state transformer (1) 12" - 48" stem extension (1) Low Voltage Track Fixture
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Juno® Trac-Master® low-voltage designer transformers offer quiet operation and attach to all Trac-Master and Trac-Lites™ track. These low-profile, 12V, 60VA electronic transformers feature an on/off
- category
- subcategory
- environment
- voltage
- spec →
The TRIANT® 2 LED Puck Lights operate on a dual 12/24V platform for task and accent lighting in a small fixture.
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 50W → 100W
- spec →
Durable 12V LED accent light for outdoor home and commercial use. Low voltage, wet listed, and perfect for permanent outdoor accent lighting.
- category
- subcategory
- environment
- voltage
- spec →
Low Voltage Retrofit Kits provide an easy and affordable solution to convert existing standard 6" incandescent housings to high performance low voltage halogen fixtures. Kits are available either for MR16 light sources and require the use of a low voltage trim for either light source. Ideal for instantly changing general lighting to halogen spot and accent effects. Magnetic Transformer: Pre-mounted to socket plate. 120V Input, 12V Output with MR16 socket. Quick installation screw base to medium socket included. Minimum Clearances: NLK Retrofit kits are intended only for use as non-IC components and upon installation, the housing used for the kit must maintain minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components. Lamp Types: MR16 50W
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 12DCV → 120V/12DCV
- wattage: 50W → 680W
- spec →
The Cooper Lighting Solutions GUV Chamber is an eco-friendly and cost-effective tool that uses ultraviolet-C (UV-C) light sterilization to eliminate viruses and other pathogens. The chambers disinfect objects with the power of light. The chambers comply with all applicable regulations and standards (UV-C RISK GROUP 3IEC 62471).They are combined with safeguards such as controlled-access PIN number.
- category
- subcategory
- environment
- spec delta
- voltage: 12DCV → 240V
- wattage: 50W → 785W
- spec →
This Universal lampholder family from Halo provides a broad range of clean, stylish lighting. The specialized accessories make possible a customized lighting effect and lampholder look. Lampholders are offered in a symmetrical and an asymmetrical version and are for use with Halo, Power-Trac and Lazer-by-Halo track systems.
- category
- subcategory
- environment
- spec →
iO LED Lighting's line series .75 is approximately .75" x .75" in cross section. Its low profile housing enables functional luminous intensities from "tight" architectural details such as niches, coves and casework. Similar to halogen light sources, LEDs are point sources that offer superior definition to three-dimensional objects and sparkle to reflective surfaces. Series .75 is a low voltage linear accent luminaire that may be ordered in incremental lengths that range from 6" to 72" nominal. Beam spreads are available in 10°, 25° and 55°. The asymmetric beam spread is optimized for a forward throw distribution. Projected average rated life is 50,000 hours at 70% of lamp lumen output. line series .75 is LM79 and LM 80 compliant and UL listed for dry locations. Photometrics are available online.
- category
- subcategory
- environment
- spec delta
- voltage: 12DCV → 120V/277V
- wattage: 50W → 120W
- spec →
A 4" square aperture specification grade lens angle cut reflector for 75W maximum MR16 or AR70 tungsten-halogen and 20W maximum MR16 ceramic metal halide lamps. Provides for up to 45° of lamp tilt. Distribution based on lamp beam angle. Use for accent lighting or general area illumination on slope ceilings up to 12/12 pitch. Wet location listed and suitable for use above food preparation areas.
- category
- subcategory
- environment
- spec delta
- voltage: 12DCV → 120V
- spec →
Monaco 2003 is an extremely compact and attractive MR16 low voltage fixture. The fully adjustable mounting stem provides 200° tilt and 360° rotation for easy aiming. Vertical and horizontal aim-locking mechanisms are standard. Various lenses, louvers and color or dichroic filters can be combined - up to three at once - to create multiple lighting effects. Lumiere's exclusive Siphon Protection System (S.P.S.) prevents water from siphoning into the fixture through its own lead wires.
- category
- subcategory
- environment
- wattage
- spec →
The contractor Commitment Kit is a supplementary offering intended as an aid for installation and maintenance of Metalux™ fluorescent fixtures. The kit is comprised of several common lighting accessories to provide the contractor with increased value and convenience. Kit contents include Fluorescent lampholders, lamp clips, screws, fasteners and striplite end plates and socket tracks. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
- category
- subcategory
- environment
- spec →
Portfolio 3" Adjustable accent/slope, or lensed wall wash
- category
- subcategory
- environment
- spec delta
- voltage: 12DCV → UNV
- wattage: 50W → 14W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.