ELST9440N
Single Piece Diecast aluminum faceplate. Powder Coated Faceplate. Vertical Mounting. Integrated LED board and driver. Diffused lens behind faceplate. Wet Location listed for indoor or outdoor use. Mounts in a standard single gang box. Life span of 50,000 hours L70. Input Volt: 12V or 120V. (12V units work with 12V AC or 12V DC supply) Rated: IP67.
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- wattage: 2W → 850W
- spec →
FCC LED combines security construction features with energy savings technology. This corner mount fixture uses a one-piece clamshell housing, security lensing, and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. Energy efficient LEDs and standard 0-10V dimming driver make this corner correctional fixture the ideal choice for your next project.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- wattage: 2W → 14W
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 277V/UNV
- wattage: 2W → 18W
- spec →
Interior architectural field selectable cove lighting
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- wattage: 2W → 6.2W
- spec →
Lumark Parking Garage and Canopy Luminaire
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- wattage: 2W → 250W
- spec →
The Lumière Eon 303 Bollard luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is constructed from machined and extruded aluminum creating a sealed optical compartment. The LED bollard provides a zero uplight solution with a fixed head in 8.5W, 15.5W, or 30.6W configurations. The Eon Bollard luminaires are ideal for pathway or general ground mount illumination where greater lateral or forward throw illumination is needed. Photocell control options are available.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- wattage: 2W → 5W
- spec →
Metalux VHB designed for a variety of applications with a balance of performance and affordability
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- spec →
Designed for use in architectural and commercial applications with limited plenum height, the patented WaveStream optical technology provides uniform, glare-free illumination along with high efficacy, providing the perfect solution for high ceiling applications.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- wattage: 2W → 99W
- spec →
Williams GNR LED high bay is NSF/ANSI 2 certified and IP66 rated for food processing, cold storage, and washdown areas. Built for high-pressure cleaning and extreme temperatures with optional motion sensor and battery backup.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- spec →
Wall Pack Field Selectable Output & CCT The AMWM-CSR Full Cutoff Wall Pack from Best Lighting Products is engineered to meet the needs of communities prioritizing responsible outdoor lighting. With a true full cutoff design, the WPFCSR helps prevent light trespass and skyglow—making it ideal for projects that must comply with Dark-Skies legislation or local ordinances. Available in two high-output models, this wall pack delivers up to 17,186 lumens while allowing field-selectable color temperatures (3000K/4000K/5000K) for precise ambiance and application. Designed for durability, it features a bronze powder-coated, die-cast aluminum housing, IP65 and IK08 ratings, and an integrated photocell. 0–10V dimming and screw-in sensor readiness (with optional PIR or microwave sensors) ensure maximum energy efficiency. DLC Premium and cULus listed, this luminaire is backed by a 5-year warranty. Whether you're illuminating schools, walkways, or municipal buildings, the AMWM-CSR delivers high-performance lighting without polluting the night sky.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- wattage: 2W → 120W
- spec →
The LAC Series crowned four-rung traditional acorn luminaire features a corrosion-resistant cast aluminum fitter with 11 decorative design options, combined with a high-impact clear acrylic globe with two available sizes. It utilizes a three-dimensional LED Power Array™, offering efficient IES distribution patterns (Types II, III, IV, and V). Available in neutral, cool, and warm white, with lumen maintenance of L94 at 60,000 hours, this fixture supports dimming and is UL® listed for wet locations. Optional features include mini-button photocells, motion sensors, and two lens configurations for diffused lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/12DCV → UNV
- cct: 4000K → 2700K
- spec →
Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- spec →
The RINA ECO LED Series features sleek, luminaires available in standard diameters, custom sizes available upon request. Choose from standard finishes in black, white, or request custom RAL colors. Dimming options include 0-10V, and Casambi. Various color temperatures (CCT) are available:, 3000K, 3500K, 4000K, and tunable white. With CRI options of 80+ and 90+, and optional sensor technology, the RINA ECO LED Series provides versatile, high-quality lighting solutions tailored to your needs.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- wattage: 2W → 180W
UL 1598 Classified Retrofit Kit; AC Driver-On-Board Technology; Data per NVLAP accredited laboratory; TRIAC dimmable to 5% (forward and reverse phase); Energy star CSD; 5 year warranty. Specifications • Input voltage: 120VAC; 50/60Hz • 13W, 14W, & 23W Models • Available in 3000K or 4000K • Constant current design •
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120V
- wattage: 2W → 13W
- spec →
Power your outdoor lighting with precision and reliability using our 60W Outdoor Low-Voltage Transformer. Designed for landscape lighting systems, this compact yet powerful transformer converts standard 120V AC to safe 12V AC, ideal for low-voltage fixtures. Built for convenience and efficiency, it features a built-in timer and photocell sensor to automate your lighting schedule. The timer allows for customized on/off settings, while the photocell detects ambient light, automatically turning lights on at dusk and off at dawn, saving energy and extending bulb life. Housed in a weatherproof, durable enclosure, this transformer is built to withstand the elements, making it perfect for year-round outdoor use. Whether you're lighting pathways, gardens, or architectural features, this reliable transformer provides consistent power and smart control.
- category
- environment
- voltage
- spec delta
- wattage: 2W → 300W
- spec →
Eclipse Curve Ceiling Mount Luminaire. Color Rendering Index : 90-100; Correlated Color Temperature : 2700K,3000K,3500K,4000K; Driver Orientation : Integrated; Light Distribution Detail : Spot,Medium,Flood,Wide Flood; Lumen Output : 501-1000,1001-1500,1501-2000,2001-3000,3001-4000; Mounting Type : Ceiling Mount; Listings : cETLus for Dry Locations,Title 24 Part 6 JA8,DLC® Listed,Declare Compliant; Product Type : Ceiling Mount
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120V
- spec →
Step Light with Photocell with SKUs WL-LED203-30-WT,WL-LED203-AM-WT -
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/12DCV → 120V
- cct: 4000K → 3000K
- spec →
Choose Kelvix's dmxc 2c 4z iw w for your next project. Contact us today to learn more.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/12DCV → 120V
The OSQW™ wall mount luminaire features NanoComfort® Technology which provides superior glare reduction and visual comfort with high-efficiency illumination delivered precisely where it is needed. Designed for easy installation with through-wired or conduit entry from the top, bottom, sides and rear. Plus, emergency battery back-up option is available.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120V/277V/347V/480V
- wattage: 2W → 7W
- spec →
5"/6" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Retrofit luminaires deliver over 1050 lumens with a regressed cone construction, which optimizes visual cut-off and adjusts up to 30°. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housings: NFBIC-5LMRATA = 5" Fire Rated LED Housing NFBIC-5INCATA = 5" Fire Rated Line Voltage Housing NHIC-5LMRAT = 5" IC Air-Tight LED Housing NHIC-527LMRAT = 5" Shallow IC Air-Tight LED Housing NHIC-501QAT = 5" IC Air-Tight Line Voltage Housing NHIC-527QAT = 5" Shallow IC Air-Tight Line Voltage Housing NFBIC-6LMRATA = 6" Fire Rated LED Housing NFBIC-6INCATA = 6" Fire Rated Line Voltage Housing NHIC-6LMRAT = 6" IC Air-Tight LED Housing NHIC-27LMRAT = 6" Shallow IC Air-Tight LED Housing NHIC-17QAT = 6" IC Air-Tight Line Voltage Housing NHIC-27QAT = 6" IC Air-Tight Line Voltage Housing NH-26Q = 6" Non-IC Air-Tight Line Voltage Housing NH-27Q = 6" Shallow Non-IC Air-Tight Line Voltage Housing NHIC-6G24ATFL = 6" IC Air-Tight GU24 Housing NHRIC-5LMRAT = 5" IC Air-Tight LED Remodel Housing NHRIC-527LMRAT = 5" Shallow IC Air-Tight LED Remodel Housing NHRIC-504QAT = 5" IC Air-Tight Line Voltage Remodel Housing NHRIC-6LMRAT = 6" IC Air-Tight LED Remodel Housing NHRIC-27LMRAT = 6" Shallow IC Air-Tight LED Remodel Housing NHRIC-17QAT = 6" IC Air-Tight Line Voltage Remodel Housing NHRIC-27QAT = 6" IC Air-Tight Line Voltage Remodel Housing NHR-26Q = 6" Non-IC Air-Tight Line Voltage Remodel Housing NHR-27Q = 6" Shallow Non-IC Air-Tight Line Voltage Remodel Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120V
- wattage: 2W → 10W
- spec →
Stairwell lighting typically operates continuously at full output despite very low, intermittent use. The solution to this unique application is bi-level lighting which balances safety and security with energy savings. An integrated motion sensor and bi-level ballast provide standby low level light, and upon detection of motion in a space, restores lighting to full brightness.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → UNV
- spec →
Wireless fixture dimming and monitoring now available in one control. Wireless-enabled Communication Remote On/Off/Dim Control Zero Cross Relay Switching Optional On-Board GPS
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/12DCV → UNV
- spec →
MODA MINI COVE INTERIOR is an award winning, patented, miniature line voltage cove lighting system. Powerful and efficient with a choice of Standard Output at 502 lumens per foot or High Output delivering an astonishing 1004 lumens per foot packaged in a small size of just 1 3/10" (33mm) tall fixture. Unlike other fixtures which are much larger in physical size, MINI COVE utilizes the latest Advanced MODA Design and Electronic Engineering, ensuring fixtures are cool to the touch even at 1004 lumens per foot. This is achieved by designing a forward thinking fixture with intelligent driver technology and by under driving the most advanced LEDs in the World. Thus creating a fixture which is so cool it can be held after days of illumination. The L70 (longevity) of the fixture is extended and phosphor degradation kept to a minimum.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120V AC/240V AC/277V AC
- spec →
“GEN 3” - LED DUAL SELECTABLE FULL CUTOFF WALL PACK BUY AMERICA OPTION The DUMONT II GEN3 Series 9120G3 is traditional full cutoff wall pack constructed out of a die-cast aluminum housing and polycarbonate lens. The unit comes standard with 0-10V dimming capability and two power ranges with a dual selectable platform, wattage and color temperature, on each for jobsite versatility. Options include a pre-installed photocell and Buy America Compliancy. IP65 rated.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120-277V
- wattage: 2W → 116W
- spec →
The iO Lighting MiniO Flex-Optic maintains the minimalistic form factor of the MiniO family while cleverly illuminating curvatures in architectural details. Four optimized optical distributions across four color temperatures provide enhanced, essential layers of light. The MiniO family reinforces creative design freedom with minimalistic flexible forms of light and remote drivers. Ideal for indoor or outdoor organic architecture where flexible top-bend architecture is necessary to illuminate small spaces. Utilize as a wallgrazer in a linear run with one of the four co-molded optical-grade silicone options, placing light on the desired details. This MiniO minimalistic, flexible form factor is available in 0-10V dimming via remote driver and creates runs up to 16.4' on a single power supply.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120-277V
- wattage: 2W → 100W
- spec →
The Bailey large round ceiling series with its wide metal trim band and white acrylic diffuser, is available in two finishes and two sizes. Featuring five color adjustable CCT and options for battery back-up, motion sensor or battery back-up with motion sensor.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120-277V
- wattage: 2W → 45W
- spec →
The intended use of this product is for any outdoor commercial or industrial building accent, hallways, stairwells, or corridor applications. Ideal for areas requiring security or accent lighting with an optional photocell for maximum energy efficiency.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120-277V
- wattage: 2W → 15-30W
- spec →
Wall sconce series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing and mounting plate. - Micro-prismatic patterned flat, tempered silk-screened soda-lime glass diffuser. - Custom molded, anti-aging gasket(s). - Stainless steel external hardware. - High-efficiency COB, combined with an optimized passive cooling system, provides a long LED life. - Internal specular reflector coated with 5-layers of PVD 99.98% pure aluminum providing >95% reflection. - Single (TECH) or dual (DOUBLE TECH) light emission. - IESNA Type I light distribution. - Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver. - Junction box mounting plate included (for 4" octagon box only, provided by others). - Consult factory for dimming options, custom finishes (please specify RAL color), and non-cataloged CCT (Kelvin) options. - Product meets Buy American Act requirements within ARRA. - 5-year warranty.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120-277 V (50 / 60 Hz)
- wattage: 2W → 11-22W
- spec →
The LED Steel Frame troffer are available in 2 x 2 and 2 x 4 size with a full face LED lumen package. Available in 3000K, 4000K and 5000K colors, all models are dimmable and compatible with most lighting controls systems. Chicago plenum and New York Plenum ratings available.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/12DCV → 120-277V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.