ELSF40CT5W
Suitable for hard wire installation into a 3 1/2" Round or 3 1/2" Octagon junction box. Housing meets restricted air flow requirement (per ASTM E-283). CA Title 24 compliant (JA8-2016). Meets ENERGY STAR requirements. cULus Listed for N and BZ finishes. cETLus Listed for W finish. Warranty: 5 years limited.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
CorePro, LEDtube, T8, 47-1/4 inch, 9.9 W, 4000 K, 1600 lm, 50000 hour(s), 161.00 lm/W, G13, Glass
- category
- environment
- CCT
- wattage
- spec →
Juno® IC1ALED 600LM, Dedicated LED, Air-Loc® sealed new construction housing. Choice of dimmable drivers: 10.2W nominal dedicated 120 volt driver compatible with incandescent, magnetic low voltage
- category
- environment
- lumens
- CCT
GradeScape 300 Bluetooth Clear convex lens, for uplighting. A complete family of in-grade lighting solutions for a variety of lighting applications. Combines a rugged brass lid with a non-corrosive polymer housing for long life. Specifications Lead Wire Length: 60” 16AWG wire lead. Housing: Non-corrosive polymer. Lid: Cast brass, attached with 5 color-matched stainless steel screws. Socket: Spring-loaded ceramic bi-pin MR16, with dual contacts and lamp clips.
- category
- environment
- CCT
- wattage
- spec →
Perfect for home, or office, Flexi's head and joints rotate and move to virtually any location required, bringing light right where you need it. Finishes: White, BlackSizes: 6inCCT: 30K
- category
- environment
- lumens
- CCT
- spec →
Uniform Dim to Warm, incandescent-like LED strip tape, replicates an incandescent dimming curve by shifting to a warmer CCT at its low levels.
- category
- environment
- lumens
- CCT
- spec →
LEDUR TW allows the end user to select between three different CCT at any time with a three-position switch. The edge-lit placement of the LEDs provides smooth uniform light across the counter surface, eliminating hot spot reflections in granite and other surfaces normally generated by traditional LED under cabinets. LEDUR TW features easy installation with captive screws under removable caps. Completely dimmable and linkable, the LEDUR TW is a perfect solution for energy efficient lighting to replace halogen or fluorescent under cabinets offering the dimming flexibility of halogen or xenon and the even light distribution, cool operation and energy efficiency of fluorescents. FEATURES Built-in on/off rocker switch and 3 positions sliding color temperature switch Edge lit design eliminates LED diode image Linkable up to 400 Watts fixtures 3 wire grounded electrical port on both ends for power or linking Captive Screws for easy mounting Input Voltage: 120V Lumens / Wattage: 475lm per foot / 4.9W Color Temperature: 3 Selectable CCT (2700K / 3000K / 3500K) or (3000K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Length: 8" Finish: Bronze
- category
- environment
- CCT
- wattage
- spec →
The Burk display head by Sean Lavin for Tech Lighting combines design simplicity with practical technology. Inspired by telephoto camera lens this simple display head houses a powerful LED source harnessed by field changeable optics for the most precise beam control. The Burk head is highly customizable featuring a plethora of finishes, beam spreads, lamping and stem lengths. Further customize the Burk head by combining it with any complementary Tech Lighting free-jack or rail system. This low-voltage display head is ideal for commercial lighting applications such as retail stores, libraries and galleries. Available in modern finishes. The Burk ships with your choice of 18° or 40° field changeable optics or integrated lens holders (both sold separately). • High-tech display head that combines simplicity with practical technology • Telephoto camera lens inspired design • Highly customizable featuring a plethora of finishes, beam spreads, lamping and stem lengths • Compatible with the free-jack or rail system also available by Tech Lighting • Pivots 88° and able to point straight down • Protected by a 5-year warranty
- category
- environment
- lumens
- CCT
- spec →
An even, continuous, tubular, architectural light source with a minimal profile, providing evenly diffused light from a single LED source at the top of the tube. Perfectly designed for spaces requiring diffused light that provides soft and even illumination on walls, ceilings, and work surfaces. The minimalist size of the profile creates visual interest without overwhelming a space. Subtle illuminated joints maintain the continuous look with minimal distraction. The customizable HPC Solo system provides many configurations to fit any space including standard configurations for straight, curved, or welded continuous runs, as well a free form design possibilities with horizontal and vertical change of direction possible. All illuminated in our slimmest 2” dia profile, HPC Solo will ensure your space feels considered and beautiful.
- category
- environment
- lumens
- CCT
- spec delta
- wattage: 10W → 96W
- spec →
LED ceiling fixture that comes with a 1" ø solid clear frosted acrylic diffuser available in 3 lengths; SM 6.5", MD 10" and LG 16". Can be customized in other size, finish, lamping and dimming options. LED available with multiple dimming options
- category
- environment
- lumens
- CCT
- spec →
Sleek and versatile, Hollow is a dynamic fixture that can be specified for a wide variety of interiors – from luxury residential spaces to hospitality environments and commercial settings. Hollow rethinks pure, simple forms with an easy rotation system that slides open to a 90º, 60º, and 45º angle –– or anything in between –– for a truly customizable lighting design. The design of Hollow allows the fixture to blend into nearly any existing interior space, as the adjustable interior tube can be tucked into the fixture’s shell, providing dimmed indirect lighting. The tube can also articulate out, shifting into a direct spotlight.
- category
- environment
- lumens
- CCT
- spec →
The LSSR2 is the ultimate flexible strip retrofit with lumen output and color temperature selection at the point of installation. A cost-effective solution to retrofit existing T8/T12 fluorescent strips to LED technology.
- category
- environment
- lumens
- CCT
- spec delta
- wattage: 10W → 75W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.