EL770ICA
IC Airtight for direct contact with insulation. With quick connect terminal. Transformer (EL770ICA-7 only): 277V to 120V step-down transformer. Meets Title 24 requirements. ENERGY STAR® Certified. Trims and inserts sold separately.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →H277 transformer steps 277V line voltage down to 120V fixture operating voltage. 300VA max. For use with Non-IC housings.
- category
- subcategory
- environment
- voltage
- spec →
Transformer 120:268:277-500VA Lighting
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V/120V → UNV
- spec →
The QJB is a small 4-inch square AC power supply available in 10 Watts or 20 Watts; 120V or 277V input.
- category
- subcategory
- environment
- voltage
- spec →
Indoor and outdoor wall mounted fixtures, comprising: - Die-cast painted aluminium housing - Aluminium heat dissipation system - Flat, tempered glass diffuser, machined and screen-printed on the inner surface for MIMIK FLAT series - Silicone gasket - LED versions include 120/277 V safety transformer - 3000 K and 4000 K, mid-power LEDs board for MIMIK FLAT series - Available in single (M) and dual (B) emission versions
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V/120V → 120-277 V (50 / 60 Hz)
- spec →
The LightSync Digital Power Supply Repeater 4 (LSPSR4) is a remote mounted power supply and data repeater. The PSR4 adds power for LightSync devices and refreshes both LS and LL data communications and is ideal for network distribution. The LSPSR4 has one input and two branch outputs with 2 ports for going up to 4 directions. The power supply supports an additional 20 LS devices and the repeaters refresh data for up to 31 more LL/LS device per branch.
- category
- subcategory
- environment
- voltage
- spec →
The Fail-Safe Changing Views is a new series of visual therapy luminaires by Eaton. Designed to bring warmth, ambience and positive energy into a variety of environments, these luminaires help create a calming influence throughout any facility. The CV Series is designed with an extremely thin profile, less than 1" deep, and it is ADA compliant. Choose from a variety of images in the picture gallery to create wall murals.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V/120V → UNV
- wattage: 24W → 100W
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 50W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x10 residential framing or commercial installation. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Units may be used in direct contact with insulation and building products. A complete fixture requires two components; a P3MRREMOTE housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions. Requires a remote low voltage transformer supplied by others.
- category
- subcategory
- environment
- spec delta
- wattage: 24W → 71W
- spec →
Transformers reduce line voltage to 12 volts for use with Lumiere low-voltage fixtures. Transformers are available in four basic types: hard wire installation, cord and plug, in-ground, and solid state.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V/120V → 120V
- wattage: 24W → 300W
- spec →
Cooper Lighting's Modular Power Supply allows external fixture access for safe and easy installation and service. There is no need to remove lamps or reflectors to disconnect fixture power with the Modular Power Supply. Access to the individual fixture's power supply allows servicing without turning off all the fixtures disrupting occupants. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
- category
- subcategory
- environment
High-wattage replacement Power Supply for PDS-400 48V EO
- category
- subcategory
- environment
- spec delta
- voltage: 277V/120V → 48DCV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.