E45-2430-CC
Dimmable with ELCO dimmable drivers 3M Tape backing for easy installation Available in custom cuts, 16 foot and 100 foot rolls Field cuttable every 2 inches Max run of 26 feet 36 LEDs per foot Strip width of 10mm
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Madrid is an architectural grade flexible tape light for direct 120 Volt input. No driver needed, it connects directly to line voltage, with an open bare wire. This enables run lengths up to 164 feet. Can be installed into extrusions or can be mounted directly to surfaces with mounting clips. MacAdam Step More
- category
- subcategory
- environment
- lumens
- spec delta
- cct: 3000K → 2700K
- spec →
NEO3 Micro D2W is a flexible, direct-view neon ribbon with a compact housing, offering the same top and side bend versatility as NEO3 in a smaller form factor for easy specification in curved and straight indoor and outdoor projects.
- category
- subcategory
- environment
- CCT
- wattage
- spec →
Choose Kelvix's rgbw indoor for your next project. Contact us today to learn more.
- category
- subcategory
- environment
- CCT
- spec →
For warm dim & tunable white uses, QTL's DW-HE24/4.0 dynamic white linear LED strip has a voltage of 24-volts and an output of 4.0 watts per foot.
- category
- subcategory
- environment
- CCT
- wattage
- spec →
Rapid Ribbon RGBW by Acolyte is the no-frills version of our premium product, available in 4.4 W/ft and ready to ship in 48 hours or less!
- category
- subcategory
- environment
- CCT
- wattage
- spec →
Comfort Dim technology tunes the color temperature as the luminaire is dimmed. Beginning at a bright 3000K, as the tape light is dimmed the color temperature warms to 1800K. LED Tape Light is a perfect solution for your LED linear lighting needs. This energy efficient and very low profile LED Tape is great for use in cove lighting, architectural enhancements, under cabinet or many more discreet locations. Features ·Comfort Dim technology tunes the color temperature from 3000K to 1800K ·170 lumens per foot @ 3000K ·Field cuttable every 2" ·Easy to install; pre-applied 3M™ tape or optional mounting accessories ·No soldering or additional wiring is required
- category
- subcategory
- environment
- CCT
- spec →
The iO CoviO provides architectural cove lighting and allows for continuity of light from indoor to outdoor spaces due to its IP66 rating and small size. The CoviO delivers functional cove lighting with 3 lumen output options up to 1500 lm/ft. With standard integral 0-10V dimming from 100% to 1%, the CoviO delivers a full range of output from functional illumination to a subtle decorative glow. The standard 90 CRI LED module delivers high quality, clean, uniform cove lighting for up to 300 ft from a single power drop.
- category
- environment
- lumens
- CCT
- wattage
- spec →
Wall effect series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free (<1%) precision die-cast aluminum housing and mounting plate. - Extra-clear, tempered, silk-screened, flat glass diffuser. - Custom molded, anti-aging gasket(s). - Stainless steel external hardware.
- category
- environment
- lumens
- CCT
- wattage
- spec →
The in-ground luminaires for functional and scenographic lighting
- category
- environment
- lumens
- CCT
- wattage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.