E418C0840BB2
High efficacy LED module. Triac/ELV/0-10V dimming. Must be used with ELCO 4" Cedar™ System Housings. Frosted acrylic module lens for even lumen distribution. Life span of 50,000 hours L70 based on LM80 standardized test results USA designed and assembled. Limited 5 year warranty. 2 at the end of the item number denotes Generation 2. Please note Gen 2 and Gen 1 are not cross compatible.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
HALO RA Canless 4" and 6", Adjustable Gimbal, Field Selectable CCT + Dim-to-Warm
- category
- environment
- lumens
- CCT
- wattage
- spec →
1” Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Bullnose reflector with a filleted aperture which allows for minimal aperture brightness while still producing the nadir footcandles. Compatible Housings: NHIOICD-16, NHIOICDCP-16, NHRIOIC-16 Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 600lm / 10W Optics: Spot, Narrow Flood, Flood
- category
- environment
- lumens
- CCT
- wattage
- spec →
- category
- environment
- lumens
- CCT
- wattage
- spec →
The Stixx Micro projector offers stylish performance and versatility. The 1" Ø aluminum head is multi-directional 355°/90°. Output: 9W | 889 - 1341 lumens (nominal) CREE COB available in 80 | 90 | 95+ CRI with reflectors 39° | 60° 4 stock CCTs: 2700K | 3000K | 3500K | 4000K
- category
- environment
- lumens
- CCT
- wattage
- spec →
Designed for direct T-Grid mounting, the HTG-3 Surface T-Grid delivers seamless integration and high-performance illumination with a minimal 3" aperture and ultra-slim 1.38" depth. Featuring Microstructure EdgeTech Optics™ (MEO™), it offers optic options including Batwing, Glare Control, Diffused (Lambertian), and Wall Wash. Achieve clean, continuous runs up to 250 feet with no lens breaks or hotspots, and design flexibility with mitered lit corners. The innovative toolless “Push to Eject” system and flush T-Grid mounting make installation fast and clean. Supports 16' on-center spacing with Batwing optics and offers SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White options. Available in custom powder coat finishes. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.
- category
- environment
- lumens
- CCT
- wattage
- spec →
The Fail-Safe FMS combines maximum security construction features with energy saving technology. Utilizes a one-piece housing, security lensing and tamper resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. ETL listed for damp locations, wet location under covered ceiling optional.
- category
- environment
- lumens
- CCT
- spec →
Budget-minded ceiling mount LED Vapor Tight to protect against dust, moisture, and breakage. Ideal for factories, warehouses, construction sites, or simply for the aesthetics in retail, hospitality,
- category
- environment
- lumens
- CCT
- spec →
Juno SlimForm JSF Series fixtures can be accessorized by adding a decorative finish trim. Trim accessories include field-bendable tabs that easily secure to the fixture without the need for tools!
- category
- environment
- lumens
- wattage
- spec delta
- cct: 4000K → 2700K
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.