E3LK65ICA-EM1
IC Airtight for direct contact with insulation. Koto™ Architectural Housing: 120/277V 0-10V/Triac/ELV or 120V Triac/ELV with optional Emergency Battery Backup. Must be used with Architectural Koto™ LED Light Engines (ELK19, ELK21, or ELK24 Series). Lumen output based on module
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Experience versatility with our 6-inch LED round trims featuring a selectable color temperature switch, providing seamless adaptation to diverse applications.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
Steel housing with standard powder coat paint finishes with tamper resistant polycarbonate diffuser. ADA compliant with a durable extruded white textured polycarbonate or optional Amber Honey, Beige, or Opal Alabaster lens. BAA/BABA Complaint
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
Ideal for facilities that may not have access to the outside world via internet connection, the AirMesh Hub is a key component of the entire LED lighting system. It can switch lights off or on, or dim them to a specified level. Zones can be established so that lights in a particular area can be controlled separately from others. The system stores power data, behaviors, alarms and critical events locally for maintenance and troubleshooting.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 277V
- spec →
The Fail-Safe FMS combines maximum security construction features with energy saving technology. Utilizes a one-piece housing, security lensing and tamper resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. ETL listed for damp locations, wet location under covered ceiling optional.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. The LDCM-PL is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.
- category
- environment
- voltage
- spec delta
- wattage: 12.5W → 450W
- spec →
4- and 6-inch surface mount LED disk lights that easily mount to standard and pancake junction boxes
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120V
- spec →
Sure-Lites LED Emergency Battery Pack
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
JSBT SlimBasics™ Tapered LED Disk Light Series comes in 4" and 6" sizes and provides even illumination where you need it most. Designed to provide good lighting quality, while also being budget
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120V
- spec →
LiteFrame® 2.0 LFR-6RW
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.