LSP65DX-RGBW
LSP65DX-RGBW is a versatile indoor digital color-changing LED strip, offering a full spectrum of vibrant colors with red, green, and blue LED technology. This addressable RGBW strip allows individual control every 4 inches, enabling dynamic effects, patterns, chases, and more. Designed for seamless integration, it is fully compatible with DMX control systems for precise lighting control. RGBW QUICK SPECFEATURESDIMENSIONSDOWNLOADS OPERATING VOLTAGE POWER CONSUMPTION LEDs/ FT. LEDs/ PIXEL LUMEN OUTPUT IC TYPE DIMMING MAXIMUM RUN LENGTH CUTTABLE BEAM ANGLE RATING CERTIFICATIONS LUMEN MAINTENANCE 24V DC 4.6W per Ft. 18 LEDs per Ft. 6 LEDs per Pixel (4 in.) 227 Lumens per Ft. WS2814 Through DMX Controller 16 Ft. Every 3.9 in. (100mm) 120° Indoor UL Listed 50,000 Hrs. Key Features: ⬇️ LSP65DX-RGBW ⬇️ Installation Guide ⬇️ Wiring Diagram
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
T-BAR ECO DC is a low voltage linear light offering the same key benefits as our T-BAR LED family, but with a more basic feature set for contractor design-build projects
- category
- environment
- voltage
- CCT
- wattage
- spec →
The popular NanoLume can be specified with Boca Lighting and Controls’s Dim to Warm technology, Nano Warm Dim.
- category
- environment
- CCT
- wattage
- spec delta
- voltage: 24DCV → 120V
- spec →
Time Sync Hub (TSH-100/TSH-200)
- category
- environment
- voltage
- spec delta
- wattage: 6W → 525W
- spec →
The AL Driver 800 is a multi-protocol, 800W driver for low voltage LED products. The input control protocols include DMX, RDM, 0-10V and DALI; and features 24V DC / PWM output. It offers maximum flexibility with your front end control preferences.
- category
- environment
- voltage
- spec delta
- wattage: 6W → 960W
Effortlessly power your smart outdoor lighting system with our 36W Plug-In Driver, designed specifically for low-voltage landscape lighting. Delivering a steady 24V DC output, this compact driver is ideal for powering smart landscape fixtures with consistent performance and minimal installation effort. With its plug-and-play design, setup is quick and convenient, no wiring required. Simply connect to your smart-compatible landscape lights and enjoy reliable power and seamless integration with your lighting control system. Housed in a durable, weather-resistant enclosure, this driver is built to handle outdoor environments while maintaining optimal performance.
- category
- environment
- voltage
- spec delta
- wattage: 6W → 36W
RF Receiver – Dimming 1-10V /driver 50W, Input 230V, Output 24V More
- category
- environment
- voltage
- spec delta
- wattage: 6W → 50W
- spec →
CBU-PWM4 is a Bluetooth controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load.
- category
- environment
- voltage
- spec delta
- wattage: 6W → 144W
- spec →
The Inline LED Dimmer Switch is inline style for a quick, plug-and-play installation. This LED dimmer is compatible with 24V and 12V LED lights. More at ElementalLED.com
- category
- environment
- voltage
- spec delta
- wattage: 6W → 100W
- spec →
24VDC, 3 Conductor Wire System
- category
- environment
- voltage
- spec delta
- wattage: 6W → 96W
- spec →
The ÉPIX Flex Boost is a plug-and-play, 24V in-line voltage booster that doubles the capacity of an ÉPIX Flex Drive output, allowing it to control a greater quantity of ÉPIX Flex 20 fixtures. This is the perfect solution for creating large-scale or extended-run lighting installations that require more fixtures than a single driver output can typically support.
- category
- environment
- voltage
- dimming
- spec delta
- wattage: 6W → 200W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →