ELIS100
Bodine Emergency Lighting Inverter, | Bodine
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
Myers Emergency Power Systems has more than 60 years of experience to serve the growing emergency lighting control needs of customers both domestic and abroad. Contact us today to learn more!
- category
- subcategory
- environment
- voltage
- dimming
- spec →
The three-phase EON Model EL3 centralized emergency lighting inverter offers the best reliability and performance for your egress lighting system.
- category
- subcategory
- environment
- spec →
OSHPD CERTIFIED Three Phase Emergency Lighting Inverter
- category
- subcategory
- environment
- spec delta
- voltage: 120V → 208V
- spec →
The IOTA IISCN 175 is a cUL Listed emergency lighting inverter designed for Canada. It features a single-phase sine wave output that provides power to designated emergency lighting fixtures for a
- category
- subcategory
- environment
- spec delta
- wattage: 40W → 175W
- spec →
Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in white or black finish. Two fully adjustable semi-recessed, round MR16 lamp heads for optimal light distribution Ultra-bright, energy efficient, long-life White LED lamps provide up to 76-ft center-to-center spacing with 3-ft path of egress at 7.5-ft mounting height. Surface mount via easy connect back plate, which fits most standard junction boxes and snaps into place making internal electrical connections.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
AtLite UL924 and NYC code compliant LED emergency light available with two or three 80 lumen heads
- category
- environment
- voltage
- spec delta
- wattage: 40W → 78W
- spec →
The 15" Terrapin LED provides exceptional aesthetics with impressive strength and is available in 20, 30 or 40 watt lumen packages. Polycarbonate lens, clear or opal, combined with four face plates provides a choice of different styles. Choose a photocell or motion sensor for control. Select an emergency battery pack to provide egress illumination.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
The WKP Wal-Pak Full Cutoff provides a durable and efficient exterior light source for any application requiring maximum performance and minimum maintenance. The rugged, die-cast aluminum housing, stainless steel hardware and gasket sealed optics compartment combine to make the Wal-Pak virtually impenetrable to contaminants.
- category
- environment
- voltage
- wattage
- dimming
- spec delta
- voltage: 120V → UNV
- spec →
The Emergency Lighting Micro/Mini Inverters are a perfect fit in a distributed emergency lighting systems where emergency LED drivers cannot be used, such as with Type B TLEDs, integral-base lamps, or luminaires with drivers integral to the LED array (e.g. flat panels or UFO high-bays). Remote mounting up to 250 feet.
- category
- environment
- voltage
- dimming
- housing
- spec →
The EU2L Series from the Lithonia Lighting Basics™ Family is a small, low profile, thermoplastic dual lamp head emergency unit. The EU2L is available in white or black finishes with round lamp heads.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
Universal New Construction Downlight. Product Category : 4-Inch Downlight; Product Type : Downlight; Product Shape : Round; Housing : New Construction; Environment : Damp Location; Compliance : ENERGY STAR® Certified,Certified to UL924 Standard for Emergency Lighting; Correlated Color Temperature : 2700K,3000K,3500K,4000K; Color Rendering Index : 80-89,90-100
- category
- environment
- voltage
- wattage
- dimming
- spec →
A surface mount enclosure with an emergency LED driver for use with 6" ELO and ELO+ luminaires. It adds 1-1/2" height to the luminaire and matches the finish. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Compatible with 6" ELO & ELO+ Matching decorative enclosure also available Listed for field installation - UL 924 and CSA C2.22 No 141 Includes integral test switch ELECTRICAL Input Voltage: 120VAC, 50/60Hz Output Voltage: 123/131VDC Wattage: 3W Illumination Time: 90 minutes OPERATION When AC power fails, the driver immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode. BATTERY Ternary lithium-ion battery requires 24 hours to recharge. COMPATIBLE LUMINAIRES NELO-6RTWMPW: 6" ELO with Selectable CCT, 1050lm / 15W, 90+ CRI (use NELO-6RW to match finish) NELOCAC-6RP: 6" ELO+ with Dedicated CCT, 700lm / 12W, 90+ CRI MATCHING DECORATIVE ENCLOSURE NSEM-6ND: Decorative Enclosure without Emergency Driver
- category
- environment
- voltage
- spec delta
- wattage: 40W → 15W
90 Min. of Emergency Light 5°C to 50°C operating temperature. Input: 120V, 50-60Hz Output: ~110VAC (120VAC input) Output: 15W Max Compatible with EL386, EL485, EL770, EL570 series, Ply Sylo™, 4" Koto Sylo™ systems UL Listed
- category
- environment
- voltage
- spec delta
- wattage: 40W → 15W
- spec →
Ideal for wet location areas requiring emergency lighting that are subject to saturation with non-mechanically delivered water. Contemporary designed polycarbonate housing is impact-resistant,
- category
- environment
- voltage
- spec delta
- wattage: 40W → 3.7W
- spec →
Versatility, peace of mind, ease of installation and use are the hallmarks of the Power Sentry emergency lighting solutions. The optional Power Sentry® PSBCED10 module enables Power Sentry PS1030 and
- category
- environment
- voltage
- spec →
This 8 watt nickel-cadmium (NiCd) battery backup system is designed for use with the Edge Round 8'' flush mount (sold separately). It provides 90 minutes of power to the Edge Round 8'' flush mount to allow lighting for emergency egress or continuation of key operations during a loss of power.
- category
- environment
- voltage
- housing
- spec delta
- wattage: 40W → 16W
- spec →
The EB7T5 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB7T5 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
DMX Lighting Control Panel with Remote Control Breakers Looking for an efficient lighting control load center? The LCLC series of DMX controlled Load Centers uses motorized circuit breakers to offer a labor-saving one-panel alternative to DMX relay panels. Instead of a bulky setup with separate panels for different audio, visual, and lighting systems, a high quality LynTec lighting power control panel can solve your space issues. The economical Load Center panels require the least wall space for tight locations and are perfect if you are trying to save on valuable room. These compact and sleek panels are available in 26 and 41 circuit sizes od 3 phase, 4 wire 208Y/120Vac. Many small theaters, intimate restaurants, conference rooms, and other locations have found these incredibly useful. A Lighting Control Load Center is a traditional residential panel and consequently best suited for smaller circuit breaker counts or for applications with limited wall space. For a bigger arena, auditorium, or other venue, one of LynTec’s many other state of the art products would be more appropriate. The LCLC is more economical than the bigger panelboards, and is a great value for all of the features offered! Here are just a few of the high end features of this lighting power control: DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Many of these features make sure that your Lighting Control Load Center is convenient and easy to use, from the limited space it take up to the ability to have zone control. Save time, money, and space with the LCLC.
- category
- environment
- voltage
- spec →
The Entri Series of wall luminaires with modular faceplate designs provide a tasteful architectural statement equally suitable for indoor and outdoor environments. Whether providing community friendly performance in downlighting applications, or showcasing architectural features through available up and up/downlighting configurations, the Entri Series provides a palette of optical solutions to paint any surface in the right light.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 120V → UNV
- spec →
The WaveLinx Wired Universal Source Controller (SC-UN) lighting control panel sets a new standard in architectural lighting control. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, real-time individual circuit power metering and Phase Sense technology designed to ensure control even during individual phase failure.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 120V → 120-347V
- spec →
The EMO2A Series features two LED fully adjustable lamp heads in a contemporary design. quick installation and premium options, in a stylish and economical package. This fixture offers quick installation and premium options in a stylish and economical package.
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- wattage: 40W → 3.4W
- spec →
With two adjustable LED lamp heads of the EMER/CP/ADJ/LED allows the customer the ability to orient emergency lighting to the optimal angle for any given situation. The 3.6V long-life rechargeable NiCd battery provides the unit with 90 minutes of emergency operation.
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- wattage: 40W → 1W
- spec →
Branch Circuit Emergency Lighting Control Transfer Switch Lighting
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 120V → UNV
- spec →
The LCN12-WM Series takes the LCN Craftsman lantern series and creates a complementary wall mount featureing a durable cast aluminum housing with clear acrylic diffusing lenses. This fixture provides uniform illumination through advanced LED technology, making it ideal for traditional walkways and building approach as well as path of egress. BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- wattage: 40W → 2.5W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →