F3DL
337 lm/ft·Static white · IP68 & IK10 Max run 180ft @ 1.46W/ft - Flexible 3D bending for seamless integration with complex contours - IK10 impact resistance for demanding environments - IP68 rated, ideal for outdoor uses, not for underwater project - 5 years warranty FORTE 3D LARGE HE - Up to 115 lm/W (337 lm/ft) for energy-efficient illumination - 36.1ft (11m) single-feed runs for facades and architectural accents FORTE 3D LARGE LONG RUN - Up to 180.4ft (55m) single feed for seamless, uninterrupted light lines - Ideal for maximum single-feed length 54.8ft (16.7m) with minimal power access
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
RGBW tape light with multi-axis flexibility, designed for intricate signs, lettering, light boxes, stage lining, and architectural accents. Eliminates the need for additional cutting and soldering when making 45-degree turns.
- category
- subcategory
- environment
- voltage
- CRI
- beam angle
- +1 more
- cct: 2200K → 3000K
- spec →
Whether individually or in combination with various sizes, direct beam or with additional upward lighting, the DOPPIO sets stylish accents. Optional RGB
- category
- subcategory
- environment
- voltage
- CRI
- wattage
- +2 more
- voltage: 277V → UNV
- cct: 2200K → 3000K
- spec →
Get creative with this low profile exterior cove luminaire, ideal for lighting outdoor coves and accenting architectural details
- category
- subcategory
- environment
- voltage
- wattage
- beam angle
- +2 more
- voltage: 277V → UNV
- cct: 2200K → 4000K
- spec →
The Tivoli vertical trace is constructed using flexible SMD LEDs with zero voltage drop for reliability and uniformity of light and is IP67 rated.
- category
- environment
- voltage
- CCT
- CRI
- beam angle
- +2 more
- wattage: 46W → 800W
- spec →
Regressed lens adjustable shower trim with reflector is designed for use with IC or Non-IC AIR-TITE 3" Halo small aperture line and low voltage housings. Models 3007WHC, 3007PCC and 3007SN have nonconductive and non-corrosive polymer trim rings. Models 3007AC and 3007TBZ have die-cast trim rings. This wet location listed shower trim uses MR16 low voltage or GU10 line voltage lamps, ideal for accent and task lighting. Regressed lens trim offers 15° tilt with 360° orientation within housing.
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → UNV
- spec →
The iO Lighting MiniO Flex-Optic maintains the minimalistic form factor of the MiniO family while cleverly illuminating curvatures in architectural details. Four optimized optical distributions across four color temperatures provide enhanced, essential layers of light. The MiniO family reinforces creative design freedom with minimalistic flexible forms of light and remote drivers. Ideal for indoor or outdoor organic architecture where flexible top-bend architecture is necessary to illuminate small spaces. Utilize as a wallgrazer in a linear run with one of the four co-molded optical-grade silicone options, placing light on the desired details. This MiniO minimalistic, flexible form factor is available in 0-10V dimming via remote driver and creates runs up to 16.4' on a single power supply.
- category
- subcategory
- environment
- voltage
- CRI
- dimming
- +1 more
- voltage: 277V → UNV
- cct: 2200K → 2700/3000/3500/4000K
- wattage: 46W → 100W
- spec →
3" aperture specification grade open slot cut reflector. Suitable for use with 75W maximum low voltage tungsten-halogen or LED MR16 lamps, use also with integral LED light engine and reflectors. Provides for up to 45° of lamp tilt depending on housing platform. Distribution based on lamp beam angle. Use for accent lighting or general area illumination on slope ceilings up to 12/12 pitch.
- category
- subcategory
- environment
- voltage
- dimming
- spec delta
- beam_angle: 110° → 10°
- spec →
The Lanterra 1000 Series of Accent & Flood luminaires offer incredible versatility in a highly durable construction to fit a wide range of applications. Available in three sizes 1002 (2.5"), 1003 (3.25"), and 1004 (4.25") the light heads mount via a rear center swivel with a 180° tilt and 340° rotation range allowing you to illuminate each layer of foliage, focal points, and façades in your environment. Specify the mounting option and optics to best fit your application, and fine tune light output with up to two optical accessories at a time.
- category
- subcategory
- environment
- voltage
- CRI
- dimming
- +1 more
- cct: 2200K → 2700K
- beam_angle: 110° → 10°
- spec →
The DMX light controller Output Interface (SCD96-NA) can control virtually any standard DMX device such as RGB fixtures, moving lights, dimmers, and effects. This unit provides DMX output that tracks 96 channels in the WaveLinx Wired system. These allow lighting sources that use DMX as the control signal to be used as part of the WaveLinx Wired system. This compact unit can be mounted virtually anywhere.
- category
- subcategory
- environment
- voltage
- dimming
- spec delta
- voltage: 277V → 120-347V
- spec →
Most wall luminaires are both decorative and functional. When arranged in a row or as a group, they create a visual rhythm to lead your eye through a space. Their light distribution is often used to accentuate architectural features.
- category
- subcategory
- environment
- voltage
- dimming
- spec delta
- voltage: 277V → UNV
- cct: 2200K → 4000K
- wattage: 46W → 26W
- spec →
This product reached it's end of life on May 1, 2021 The Dyna Accent is a high output, outdoor rated, LED flood fixture. It features internal DMX RDM drivers, Aria wireless built directly into the unit, a 100-277VAC auto-switching power supply, and a swappable spread lens system. Available in multiple color temperature
- category
- subcategory
- environment
- voltage
- spec delta
- cct: 2200K → 2700K
- beam_angle: 110° → 6°
- spec →
A range of small, square and rectangular surface mounted luminaires with options ideal to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED’s. The CLCM is designed for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires. Great for natatoriums.
- category
- subcategory
- environment
- voltage
- dimming
- spec delta
- voltage: 277V → UNV
- cct: 2200K → 3000K
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Beamever
Full directory →20 rep agencies carry the Beamever line across 30 states. Pick your state.
Alaska AK1 agency
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
Statewide
California CA1 agency
Los Angeles · San Diego · Ventura
Connecticut CT1 agency
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
Illinois IL1 agency
- Meglio & AssociatesSignify (Philips)
Central
Iowa IA1 agency
- C&O SalesSignify (Philips)
Statewide
Kentucky KY1 agency
- LumenationCurrent
Louisville
+20 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.