HeyeBeamPowered by Heye Lab
AtLiteEmergency Units

SL2 StairLite 2 Motion Sensor Emergency Light

The StairLite 2 is designed to satisfy all stairwell lighting requirements in one easy-to-install package. The StairLite 2 is a surface-mounted, two-lamp fluorescent lighting fixture that incorporates an integrally mounted ultrasonic motion detector, a system display panel, and an optional battery backup. Either one or both lamps can be controlled by the motion sensor. Bi-level lamp operation is standard so that one lamp will remain on constantly for security and the motion detector will activate the second lamp as needed to significantly reduce the operating cost.

family: SL2 StairLite 2 Motion Sensor Emergency Lightwattage spec: 73voltage: 277Vhousing material: steel↗
Spec sheet →

Cross-References

Top equivalents — 12 across 12 brands

Compare top 3 →
  • LuminosoLE WPL 2 F W Npartial

    Injection-molded thermoplastic ABS housing

    • category
    • environment
    • voltage
    spec →
  • IsoliteELCD-1008partial

    The ELCD Transfer Switches enable standard light fixtures to be used as emergency light sources. Fire alarm interface and dimming control interface compatible.

    • category
    • environment
    • voltage
    spec →
  • MyersBATTERIES-FOR-EMERGENCY-LIGHTING-SYSTEMSpartial

    Myers EPS has more than 60 years of experience serving the growing emergency power batteries needs of customers both domestic and abroad. Contact us today!

    • category
    • environment
    • voltage
  • Dual-LiteELSS-EMERGENCY-LIGHTINGpartial

    Ease of Installation and Maintenance

    • category
    • environment
    • voltage
  • ConTech Lighting | LevitonEL2HALEDEMpartial

    Remote Capable Dual Adjustable LED Emergency Light. Light Source : LED; Listings : Damp Location; Mounting : Ceiling,Wall; Product Type : Emergency

    • category
    • environment
    • voltage
    • spec delta
    • wattage: 73W → 5W
    spec →
  • TivoliECLIPSEWALLpartial

    The Eclipse Wall is an indirect wall safety lighting system. Its ideal applications are interior walkways, egress, walkways, and stairs.

    • category
    • environment
    • voltage
    • spec delta
    • wattage: 73W → 800W
    spec →
  • Nora LightingNEPK07LEDUNVpartial

    Emergency LED driver for use with new or existing LED luminaires. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Class 2 output - UL 1310 certified, CSA 22.2 No 223-M91 Controlled power for predictable discharge 10 - 60VDC for wide range of LED loads Universal input (120 through 277VAC, 50/60Hz) Includes wall plate with test switch Certified to the energy efficiency standards of California Title 20 Accessory: NEPKA-07LEDFPTS: Replacement Remote Test Switch

    • category
    • environment
    • voltage
    • spec delta
    • wattage: 73W → 7W
    spec →
  • ExitronixLED-60partial

    General Purpose · Emergency Lighting

    • category
    • environment
    • voltage
    • spec delta
    • wattage: 73W → 1W
    spec →
  • Trace-LiteLE-C6partial

    Trace-Lite · LiteLogic · Bluetooth Controls · Power Adapters / Controllers

    • category
    • environment
    • voltage
    • spec delta
    • wattage: 73W → 5W
    spec →
  • BodineBLK1000T3UK55TS1 KITpartial

    Bodine Emergency Lighting Kits, | Bodine

    • category
    • environment
    • voltage
    spec →
  • ELCO LightingKEM-ERTpartial

    90 minutes of emergency light. Input: 100-277VAC, 50/60Hz., 110mA, 6W Output: 170VDC, 25W Charging time: 36 hours Suitable for damp location cUL listed Compatible to all 3" - 8" Elm System Fixtures (ERT3, ERT4, ERT6, & ERT8 Series) & Canless Koto™ System

    • category
    • environment
    • voltage
    • spec delta
    • wattage: 73W → 6W
  • TechlightEb7partial

    The EB7 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB7 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.

    • category
    • environment
    • voltage
    • wattage
    • spec delta
    • voltage: 277V → UNV
    spec →

Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →

Local Reps

Who reps AtLite

Full directory →

43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.

+41 more states in the full directory →

Line cards are directional — confirm coverage with the agency before routing a spec.