MRI Control Series PSF16 Channel Power Supply and Filter Pack 0-10V Dimming
The Multichannel Lighting Controller is a constant current LED Power Supply designed specifically for MRI Suites. This supply significantly frees up space near the penetration panel by combining DC power supply, linear constant current drivers, and filter into one convenient device while still providing 100+dB of shielding effectiveness. This compact power supply fully integrates with all required filters for MRI applications and offers power for up to four independent lighting zones. Each of the 16 outputs are UL1310 Class 2 rated. All drive circuitry employs linear regulation and no pulse width modulation (PWM*).
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Constant Power Emergency LED Driver Provides voltage to the Input side of the connected load during emergency mode operation.For use with switched or unswitched fixtures.Can be used with LED lamp/luminaire loads providing up to 25W and 40W of constant power in Emergency mode. Optional remote available for manual testing.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 240V/120V → 120-347V
- spec →
Take total control of your non-smart lighting with the Pure Smart™ Wi-Fi Dimmer. Designed for compatibility with dimmable fixtures, this dimmer seamlessly integrates traditional bulbs into your connected lighting ecosystem. Get ON/OFF with Press-N-Hold dimming control at the wall and seamless wireless control from the app or voice assistants —this dimmer delivers smart convenience without the need for a hub.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 240V/120V → 120V
- spec →
The WaveLinx Wired ILS Area Controller with Adaptive Dimming (ILS-SCMA0401) comes with one, two or three SCMA-0401 modules. Each SCMA0401 module offers four adaptive (forward and reverse phase) dimming channels and one iCAN communication interface.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 240V/120V → 120-347V
- spec →
The Atlas Wall Pak Pro features a patented, labor-saving design that is quick and easy to install. These energy-efficient wall lights are available in 3 housing sizes and produce a smooth, glare-free light pattern. Made of 100% aluminum, they retain a familiar architectural form that maximizes heat dissipation using external airflow fins, prolonging LED and driver life.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 240V/120V → UNV
- spec →
The TWR LED wall pack luminaires offer a classic appearance and traditional shape to help maintain building aesthetics when replacing the entire site or only a portion of a building’s wall packs.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 240V/120V → UNV
- spec →
A dedicated driver that powers and controls ÉPIX Flex 20 LED products, featuring two expandable outputs, versatile control modes, and remote management through an integrated web server. Ideal for large-scale architectural, event, and stage productions that require powerful, centralized control over long and expandable runs of flexible, pixel-mappable LED elements.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 240V/120V → 240V
- spec →
QTL QTM-eLED indoor rated electronic DC power supply with DMX utilizes Xitanium driver from Advance and the LINEARdrive DMX decoder from eldoLED.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 240V/120V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →